• International Journal of Computer Science & Network Security
• /
• v.21 no.6
• /
• pp.23-28
• /
• 2021

The article discusses the features of adaptation of the parameters of the physical layer of data transmission in self-organizing networks based on unmanned aerial vehicles operating in the conditions of "smart cities". The concept of cities of this type is defined, the historical path of formation, the current state and prospects for further development in the aspect of transition to "smart cities" of the third generation are shown. Cities of this type are aimed at providing more comfortable and safe living conditions for citizens and autonomous automated work of all components of the urban economy. The perspective of the development of urban mobile automated technical means of infocommunications is shown, one of the leading directions of which is the creation and active use of wireless self-organizing networks based on unmanned aerial vehicles. The advantages of using small-sized unmanned aerial vehicles for organizing networks of this type are considered, as well as the range of tasks to be solved in the conditions of modern "smart cities". It is shown that for the transition to self-organizing networks in the conditions of "smart cities" of the third generation, it is necessary to ensure the adaptation of various levels of OSI network models to dynamically changing operating conditions, which is especially important for the physical layer. To maintain an acceptable level of the value of the bit error probability when transmitting command and telemetry data, it is proposed to adaptively change the coding rate depending on the signal-to-noise ratio at the receiver input (or on the number of channel decoder errors), and when transmitting payload data, it is also proposed to adaptively change the coding rate together with the choice of modulation methods that differ in energy and spectral efficiency. As options for the practical implementation of these solutions, it is proposed to use an approach based on the principles of neuro-fuzzy control, for which examples of determining the boundaries of theoretically achievable efficiency are given.

• Journal of the Society of Disaster Information
• /
• v.19 no.3
• /
• pp.481-489
• /
• 2023

Purpose: The purpose of this study is to examine the actual disaster response and suggest improvement measures for introduction of an autonomous police system Method: This study suggests the improvement measures by reviewing police disaster response manual, related statistical data, and statutes comprehensively Result: The introduction of autonomous police system enabled effective management of police based on circumstances of each region. However, there are still doubts on police response against situations that require large number of personnel. According to analysis on roles of autonomous police during the mass disasters, the autonomous police controlled disaster site to prevent secondary damage, prevented additional disaster damages, and rescued people. However, it is hard for the autonomous police to respond against the mass disasters due to its structure. Conclusion: To improve the response of autonomous police against mass disasters, this study suggested on disaster scene control and secondary damage prevention by the police, cooperative disaster response with regional autonomous police, and utilization of control tower.

• Journal of Oriental Neuropsychiatry
• /
• v.35 no.1
• /
• pp.15-26
• /
• 2024

Objectives: The objective of this study is to develop a specialized clinical research protocol for acupuncture treatment specifically designed for disaster survivors based on insights from an expert survey. Methods: An expert panel comprising specialists in neuropsychiatry, acupuncture, and clinical research methodology was assembled. Initial data to inform the clinical research protocol design was collected utilizing open-ended responses, multiple-choice questions, and a 5-point Likert scale to gauge agreement levels. Next, this data was disseminated to a panel of experts. A cohesive clinical research protocol was then formulated during a core panel meeting by integrating insights from a panel of 10 experts. Results: The protocol developed herein entails a non-randomized controlled study involving participants aged 19~64 years old who have been identified as high-risk or cautious according to the National Trauma Center screening test. The study design includes the establishment of an active control group, which allows for the assessment of an additional effect through comparison with conventional therapy. The selected acupuncture approach involves a combination of manual acupuncture and ear acupuncture. For clinical outcome assessment, the Clinician-Administered Posttraumatic Stress Disorder Scale for DSM-5 was proposed to gauge trauma symptoms. Representative scales for various domains such as depression, anxiety, anger, insomnia, pain, and quality of life were also provided for reference. Conclusions: The developed protocol is anticipated to streamline the swift design and initiation of clinical trials during disaster scenarios. It is also designed to be scalable, thereby enabling its application in both non-randomized control group studies and single-group before-and-after comparisons.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.24 no.1
• /
• pp.69-78
• /
• 2011

In this study, an optimization method using multi-objective genetic algorithm(MOGA) has been proposed to develop a fuzzy control algorithm that can effectively control a smart tuned mass damper(TMD). A 76-story benchmark building subjected to wind load was selected as an example structure. The smart TMD consists of 100kN MR damper and the natural period of the smart TMD was tuned to the first mode natural period of the example structure. Damping force of MR damper is controlled to reduce the wind-induced responses of the example structure by a fuzzy logic controller. Two input variables of the fuzzy logic controller are the acceleration of 75th floor and the displacement of the smart TMD and the output variable is the command voltage sent to MR damper. Multi-objective genetic algorithm(NSGA-II) was used for optimization of the fuzzy logic controller and the acceleration of 75th story and the displacement of the smart TMD were used as objective function. After optimization, a series of fuzzy logic controllers which could appropriately reduce both wind responses of the building and smart TMD were obtained. Based on numerical results, it has been shown that the control performance of the smart TMD is much better than that of the passive TMD and it is even better than that of the sample active TMD in some cases.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.10
• /
• pp.3873-3879
• /
• 2010

Home service robot are not working in the fixed task such as industrial robot, because they are together with human in the same indoor space, but have to do in much more flexible and various environments. Most of them are developed on the base of the wheel-base mobile robot in the same method as a vehicle robot for factory automation. In these days, for holonomic system characteristics, omni-directional wheels are used in the mobile robot. A holonomicrobot, using omni-directional wheels, is capable of driving in any direction. But trajectory control for omni-directional mobile robot is not easy. Especially, azimuth control which sensor uncertainty problem is included is much more difficult. This paper develops trajectory controller of 3-wheels omni-directional mobile robot using fuzzy azimuth estimator. A trajectory controller for an omni-directional mobile robot, which each motor is controlled by an individual PID law to follow the speed command from inverse kinematics, needs a precise sensing data of its azimuth and exact estimation of reference azimuth value. It has imprecision and uncertainty inherent to perception sensors for azimuth. In this paper, they are solved by using fuzzy logic inference which can be used straightforward to perform the control of the mobile robot by means of the fuzzy behavior-based scheme already existent in literature. Finally, the good performance of the developed mobile robot is confirmed through live tests of path control task.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.5
• /
• pp.635-643
• /
• 2018

This paper propose a method to identify the motor parameters and improve input voltage error which affect the low speed position error of the back-emf(back electromotive force) based sensorless algorithm and to secure the operation reliability and stability even in the case where the load fluctuation is severe and the start and low speed operation frequently occurs. In the model-based observer used in this paper, stator resistance, inductance, and input voltage are particularly influential factors on low speed performance. Stator resistance can cause resistance value fluctuation which may occur in mass production process, and fluctuation of resistance value due to heat generated during operation. The inductance is influenced by the fluctuation due to the manufacturing dispersion and at a low speed where the change of the current is severe. In order to find stator resistance and inductance which have different initial values and fluctuate during operation and have a large influence on sensorless performance at low speed, they are commonly measured through 2-point calculation method by 2-step align current injection. The effect of voltage error is minimized by offsetting the voltage error. In addition, when the command voltage is used, it is difficult to estimate the back-emf due to the relatively large distortion voltage due to the dead time and the voltage drop of the power device. In this paper, we propose a simple circuit and method to detect the voltage by measuring the PWM(Pulse Width Modulation) pulse width and compensate the voltage drop of the power device with the table, thereby minimizing the position error due to the exact estimation of the back-emf at low speed. The suitability of the proposed algorithm is verified through experiment.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.5
• /
• pp.49-58
• /
• 2010

The traffic signal controllers being used in the domestic currently are being manufactured based on the korean national police standard which was developed for controlling the quad-light traffic signal having the red, yellow, left-turn arrow, and green lights. But according to the national policy for the traffic operation, they have to be changed to be able to switch the tri-light signal having red, yellow and green lights. In this study, a new tri-light traffic signal controller was designed and developed by the way improving the Signal Control Unit of the existing quad-light standard traffic controller. The Load Signal Unit(LSU) was improved to output 6 signals which are the two assemblies of three signal indications having the red, yellow, and green lights. To enough traffic signals output to control each directional movements and the various transport modes which are car, bus, bike, and pedestrian etc., the connector bus system was designed to be able to accommodate maximum 96 signals outputs being constructed by 16 LSUs. Flasher device was developed to be able to support maximum 32 red signals. In the software, the communication protocol between traffic control center and the traffic signal controller was improved and new signal map code values were defined for the developed LSU controlling the quad-light traffic signal. A model of the quad-light traffic signal controller developed and was tested three operations, protocol-operation, remote-command and control-mode. The test result operated all of them successfully.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.3
• /
• pp.290-294
• /
• 2018

Modern warfare exhibit a NCW (Network Centric Warfare) aspect through quick situation awareness and Command and Control. And Tactical messages operate on various tactical data links (TDLs). For monitoring TDL messages processed by data link processor(DLP), message analysers are generally developed as a component during system development. In addition, in order to forward TDL messages processed by DLP to the message anayzer, the interface messages between DLP and message analysers should be defined interface control document(ICD). We propose the methods using UDP or TCP packets provided by TDL layers that are delivered to DLP without communicating directly with DLP. Depending on TDL message standards and Interface Control Documents(ICDs), we design the message analyzer which communicates with data link processor using internal messages. Using known header field information from the TDL application standard such as JREAP-C, we can quickly filter candidate packets against collected packets and use the full data size information contained in the headers to verify the completed message. Because the methods proposed in this paper do not communicate directly with DLP, the methods proposed in this paper are enable to analyze the TDL application messages such as JREAP-C or Link-K without constraints in existing methods that should be reflected in the system configuration and ICD.

• Convergence Security Journal
• /
• v.17 no.3
• /
• pp.41-49
• /
• 2017

According to a research by global IT market research institute IDC, CSIM(Converged Security Information Management) market of Korea was estimated to be 1.7 trillion KRW in 2010, and it has grown approximately 32% every year since. IDC forcasts this size to grow to 12.8 trillion KRW by 2018. Moreover, this case study exemplifies growing importance of CSIM market worldwide. Traditional CSIM solution consists of various security solutions(e.g. firewall, network intrusion detection system, etc.) and devices(e.g. CCTV, Access Control System, etc.). With this traditional solution, the the data collected from these is used to create events, which are then used by the on-site agents to determine and handle the situation. Recent development of IoT industry, however, has come with massive growth of IoT devices, and as these can be used for security command and control, it is expected that the overall amount of event created from these devices will increase as well. While massive amount of events could help determine and handle more situations, this also creates burden of having to process excessive amount of events. Therefore, in this paper, we discuss potential events that can happen in CSIM system and classify them into 3 groups, and present a model that can categorize and process these events effectively to increase overall efficieny of CSIM system.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.10
• /
• pp.109-119
• /
• 2013

An unmanned ground vehicle(UGV) today plays a significant role in both civilian and military areas. Predominantly these systems are used to replace humans in hazardous situations. To take unmanned ground vehicles systems to the next level and increase their capabilities and the range of missions they are able to perform in the combat field, new technologies are needed in the area of command and control. For this reason, we present war field simulator based on information fusion technology to efficiently control UGV. In this paper, we present the war field simulator which is made of critical components, that is, simulation controller, virtual image viewer, and remote control device to efficiently control UGV in the future combat fields. In our information fusion technology, improved methods of target detection, recognition, and location are proposed. In addition, time reduction method of target detection is also proposed. In the consequence of the operation test, we expect that our war field simulator based on information fusion technology plays an important role in the future military operation significantly.