• 한국추진공학회지
• /
• 제20권6호
• /
• pp.61-69
• /
• 2016

본 연구는 이중 선회 가스터빈 연소기에서 연소실 길이와 열용량을 변수로 연소불안정 현상과 관련된 결과이다. 특히 열용량이 상대적으로 작은 구간에서 연소실 길이가 길어지면 공진 주파수의 값이 일정하게 유지되는 맥놀이 현상이 발생하는 것이 확인되었다. 이러한 맥놀이 현상은 메인 화염과 파일럿 화염이 각각 다른 주기로 거동하기 때문에 발생되었으며, 연소실 길이가 증가하여도 주파수의 값이 변하지 않는 현상은 메인 화염과 파일럿 화염의 서로 다른 상호작용 결과라고 판단된다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제35회 추계학술대회논문집
• /
• pp.379-385
• /
• 2010

본 연구는 V-gutter형 보염기를 장착한 연소기 내에 발생한 연소 주파수의 발생 메커니즘에 대해 규명하는 것이다. 연소기는 $40{\times}40mm$의 단면적을 가진 긴 덕트 형상을 가지고 있으며, 10,12,14mm의 폭을 가진 V-gutter 형의 보염기를 장착하였다. 연료로 CNG를 수직 분사하여 실험을 수행하였다. 연소시 발생하는 주파수는 연소기의 형상에 기인한 1L 종방향 모드가 발생함을 확인하였다. 또한 보염기의 크기가 화염 가능 영역의 범위에 영향을 미침을 확인하였다. 그리고 종방향 모드의 압력변동이 화염 구조에 중요한 영향을 미침을 확인하였다.

• 대한기계학회논문집B
• /
• 제31권1호
• /
• pp.99-108
• /
• 2007

In this study, the NOx formation characteristics of one-dimensional $CH_4$/Air premixed flame using detailed-kinetic chemistry are examined numerically. The combustor length and the amount of heat loss are varied to investigate the effect of residence time and heat loss on the NOx formation in a post-flame region. In the flame region, NO is mainly produced by the Prompt NO mechanism including $N_2$O-intermediate NO mechanism over all equivalence ratios. However, thermal NO mechanism is more important than Prompt NO mechanism in the post-flame region. In the case of adiabatic condition, the increase of combustor length causes the remarkable increase of NO emission at the exit due to the increase of residence time. On the other hand, NO reaches the equilibrium state in the vicinity of flame region, considering radiation and conduction heat losses. Furthermore the NO, in the case of $\phi$=1.2, is gradually reduced in the downstream region as the heat loss is increased. From these results, it can be concluded that the controls of residence time and heat loss in a combustor should be recognized as an important NOx reduction technology.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2005년도 제25회 추계학술대회논문집
• /
• pp.335-340
• /
• 2005

액체 로켓엔진 연소기에 적용되는 분사기 형상에 따른 연소특성 변화를 알아보기 위해 연소시험을 수행하였다. 사용된 분사기는 동축와류형으로서 챔버 와류실의 유무와 노즐 길이에 의한 특성변화에 초점을 맞추었다. 챔버 와류실의 유무에 따라 닫힘형과 열림형으로 구분이 된다. 노즐 길이에 따른 변화는 산화제와 연료가 분사되는 노즐을 증가시킨 분사기를 통해 이루어졌다. 연소기는 분사기가 한 개만 장착된 단일분사기 헤드, 내열재 형식의 연소실, 냉각 유로를 가진 동 재질의 노즐로 구성되어 있으며 연소실과 노즐의 외부는 스테인레스 스틸로 이루어졌다.

• 대한기계학회논문집B
• /
• 제29권7호
• /
• pp.861-867
• /
• 2005

In order to develop oxy-fuel combustor, the Flame length characteristic of $CH_4$ with oxidizer of air and oxygen has been experimentally investigated for tile nozzle diameters of 1.6mm, 2.7mm, 4.4mm and 7.7mm. The structure of $CH_4$ flame with oxidizer of oxygen was sharp in contrast with the $CH_4$ flame with oxidizer of air. The stability of $CH_4$ flame with oxidizer of oxygen was higher than $CH_4$ flame with oxidizer of air. In all $CH_4$ flames with oxidizer of air and oxygen, the flame length were dependent on the flowrate in laminar flame regime, and in turbulent flame dependent on the initial jet diameter. Using correlation equation of Delichatsios, the flame length has been expected exactly for $CH_4$ flame with oxidizer of air, but underestimated for $CH_4$ flame with oxidizer of oxygen. This paper proposed correlation equation of $CH_4$ flame with oxidizer of oxygen.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.989-994
• /
• 2001

Numerical simulations of high temperature catalytic combustion have been performed for the application to a gas turbine combustor. Dependences of inlet temperature and pressure on the distributions of temperature and species concentrations were investigated using plug flow model with detailed homogeneous and heterogeneous chemistries of methane-air mixtures. Honeycomb typecombustor deposited with Pt catalyst of 100mm in length and 26mm in diameter is used. The results show that rapid increase of temperature profile occurs earlier with the increase of inlet temperature and the decrease of inlet pressure. The condition which catalytic combustion is stabilized exists at certain range of inlet temperature and pressure. The state of catalytic combustion is also confirmed by the distributions of species concentration.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2005년도 추계 학술대회논문집
• /
• pp.245-248
• /
• 2005

SCRamjet is the key technology for hypersonic flight over mach number 6. It is characterized by very short residence time in combustor because its internal flow is supersonic. In this short time, the whole process of combustion must be done. Especially numerical study of combustor is important because air-fuel mixing rate influences the performance of combustor. Various methods of air-fuel mixing enhancement are proposed. Among these, cavity injection method is selected to study in this paper. The numerical study is conducted with the variation of the cavity length at the fixed height of unit and jet injection on the downstream of cavity.

• 한국연소학회지
• /
• 제4권2호
• /
• pp.35-41
• /
• 1999

The purpose of this study is to establish the flame structure and NOx emission characteristics of the swirl flow coaxial diffusion combustion in the model gas turbine combustor. The mean temperature, ion currents and NOx emission measurement technique showed the effect of equivalence ratio into flame length and flame stability. As a result of this study, NOx emission was increased by increasing the equivalence ratio, and the peak value of the NOx was appeared near the flame front.

• 동력기계공학회지
• /
• 제4권1호
• /
• pp.39-44
• /
• 2000

The purpose of this study is to investigate the flame structure and combustion characteristics in the model gas turbine combustor changing equivalence ratio. For this purpose, temperature and ion current were measured and these data were analyzed by the PDF and power spectra technique. We found that the flame length is longer while increasing the equivalence ratio in experimental condition, and especially ${\psi}=0.19$, combustion reaction was active by the stable swirl flow. and these flames were governed by the random three dimensional eddy.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2015년도 제51회 KOSCO SYMPOSIUM 초록집
• /
• pp.123-125
• /
• 2015

A study has been conducted to investigate the effect of swirl angle in low swirl combustor. In this study, the employed swirl angles were $28^{\circ}$, $32^{\circ}$ and $37^{\circ}$. Direct flame photos show that the width of the flame is expanded and the length of the flame is shortened when swirl angle is increased. Also, as the swirl angle was increased, the flame stability region could be widened due to the expansion of lower flammable limit. Between 3 and 7kW, CO emissions was below 10 ppm and NOx emissions was also below 27 ppm at $O_2$ 15% basis over the lean burning range of 0.6 < ${\Phi}$ < 0.9. From this investigation of stability expansion effect and emission performance, it was identified that the swirl angle $37^{\circ}$ is most suitable swirling condition in the low swirl model combustor.