• 한국연소학회지
• /
• 제16권2호
• /
• pp.40-46
• /
• 2011

The diesel pre-heater has being used in cabin heating and coolant heating of engine to reduce the engine warm up time for commercial vehicle. The pre-heaters are classified as diesel spray combustor and it forms diffusion flame. By using swirler, a recirculation flow of hot product gases is established near the fuel nozzle and it helps the maintaining of diffusion flame. The design difference of swirler can affect on reaction characteristics and temperature distribution inside pre-heater. The purpose of this study is the investigation of the effect of swirler configuration on combustion characteristics. To solve spray combustion problem, the Euler-Lagrange approach discrete model is used to track droplet trajectory and evaporation history. The PDF equilibrium model is used for chemical reaction model. These models are implemented into the FLUENT code.

• 한국재료학회지
• /
• 제11권9호
• /
• pp.797-801
• /
• 2001

In this study, the solution combustion method was employed to synthesize stoichiometric mullite, and hence the attrition process was employed to prepare ultrafine mullite particles with nano size. The thermal decomposition behavior and partial pressure of equilibrium species of both oxidizer and fuel were considered during solution combustion process. The synthesized product was mullite phase with 40 nm crystalline size, and the alumina contents of the product by TEM/EDS quantity analysis was 3.12$\pm$04 mole. The result showed that the synthesized mullite was almost close to the it's stoichiometric composition. For attrition process, the dispersion behavior of the mullite suspension was controlled and was comminuted with the condition of 800 rpm for 4 hours using 0.3 mm zirconia ball media. As a result of comminution, the mean particle size was 80 nm.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.621-627
• /
• 2001

Recycling of coal combustion by-product(Ash) are becoming more important in the utilization business as a result of the increased use of NOx reduction technologies at coal-fired power plants. current disposal methods of these by-products create not only a loss of profit for the power industry, but also environmental concerns that breed negative public opinion. Since inherent characteristics make these by-product suitable for building materials, several types of artificial aggregates and construction bricks are manufactured and tested to verify the engineering properties.

• 한국초등과학교육학회지:초등과학교육
• /
• 제28권4호
• /
• pp.467-475
• /
• 2009

This study is to enquire about ideals on combustion and to propose of teaching program using the history a science in '5. Combustion and Extinguishing' unit of elementary school science textbook in 6th grade. For this purpose, investigation questionnaires based on preceding research and science textbook are developed. The reliability of the questionnaires is .784, and the questionnaires are applied to 247 students in T elementary school in Busan. Through the results of the investigation, scientific conceptions existed in some parts. But some misconceptions still existed especially (question 1), substance's changes (question 7), formation process of product (question 13), combustibles among requirements of combustion. The patterns of the misconception are similar to historical misconceptions about combustion. Besides, the discoveries and inventions of combustion have some points about correcting misconceptions. Thus the five step teaching programs on combustion which were applied to history of the science are suggested. The confidence of the developed programs was verified as being 'excellent' by specialists. This program will be applied to think deeply about combustion in elementary school lesson and useful to introduce the history of science.

• 공업화학
• /
• 제22권3호
• /
• pp.296-300
• /
• 2011

본 연구에서는 열병합 발전소의 원료로서 목질계 바이오매스로 임목 부산물, 폐목재, 야자수 부산물, 야자수 껍질의 연소 특성을 조사하기 위하여 열중량 분석기를 이용하여 연소 실험을 수행하였다. 목질계 바이오매스의 비교군으로는 일반적인 석탄을 사용하였다. 열중량 분석기 결과로부터, 목질계 바이오매스의 연소는 석탄과 비교하여 낮은 온도인 $280^{\circ}C$에서 $420^{\circ}C$ 구간에서 가장 활발한 연소반응을 보였음을 확인 할 수 있었다. 열중량분석에 의하여 측정된 활성화 에너지에 있어서 임목 부산물은 석탄 및 기타 목질계 바이오매스와 비교하여 가장 낮은 활성화 에너지 값을 나타내었으며, 또한 목질계 바이오매스의 경우 석탄과 비교하여 연소반응속도가 크게 증가함을 확인 할 수 있었다. 이는 목질계 바이오매스의 높은 연소개시 속도를 보이는 것을 나타내며, 이러한 결과는 석탄과 비교하여 낮은 비등점의 휘발분을 많이 포함하는 목질계 바이오매스의 특성에 기인하는 것으로 판단된다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.620-623
• /
• 2001

The peculiarities of using Self-propagating High-temperature Synthesis (SHS) and solid state phase synthesis for production of high temperature superconductor materials are discussed. Oxide superconductors with general formula $ReBa_2$$Cu_3$$O_{7-x}$ (Re= Y, Yb, Sm, Nd) have been made with using barium oxide initial powder instead of traditional barium carbonate. X-ray powder diffraction showed a single phase orthorhombic perovskite structure was produced in all reactions. Phenomena observed during the grinding of the reactant mixture are presented. Mechano-chemical activation - as a pretreatment of the reactant mixture - strongly influences the kinetic parameters, the reaction mechanism, and the composition and structure of the final product.

• 플라이애쉬
• /
• 통권1호
• /
• pp.3-3
• /
• 2004

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 춘계학술대회 논문집 디스플레이 광소자 분야
• /
• pp.61-64
• /
• 2002

A novel ceramic synthesis technique, combustion synthesis, is explored to produce a orange-emitting $SnO_{2}:Eu^{3+}$ phosphors. This technique involves a reaction of metal salts with a citric acid as an organic fuel. The variation of the ratio of citric acid to metal introduces change in reaction temperature and atmosphere of the combustion reaction, which in turn influences crystallinity and luminescence properties of the final products seriously. And, the heat treatment of the as-synthesized product increases its luminescence intensity. Especially, the samples treated at above $1100^{\circ}C$ show a orange-emission peak, which is attributed to the formation of single phase and well-crystallized $SnO_{2}:Eu$ oxides in the rutile structure

• 대한기계학회논문집B
• /
• 제29권11호
• /
• pp.1277-1284
• /
• 2005

The combustion characteristics of methane oxygen diffusion flames have been investigated to give basic information for designing industrial oxyfuel combustors. NOx reduction has become one of the most determining factors in the combustor design since the small amount of nitrogen is included from the current low cost oxygen production process. Flame lengths decreased with increasing fuel or oxygen velocity because of the enhancement of mixing effect. Correlation equation between flame length and turbulent kinetic energy was proposed. NOx concentration was reduced with increasing fuel or oxygen velocity because of the enhanced entrainment of the product gas into flame zone as well as the reduction of residence time in combustion zone.

• 한국산학기술학회논문지
• /
• 제9권6호
• /
• pp.1745-1753
• /
• 2008

본 연구는 산업단지의 화학제품제조업 및 석유화학제품제조업에서 발생하는 유기성슬러지에 대하여 삼성분, 원소조성, 발열량, 열중량 분석 및 연소시험을 실시하였다. 삼성분 분석 결과 "화합물 및 화학제품 제조업"의 평균값은 수분함량 75.11, 가연분 17.42, 불연분 7.45%로 나타났으며, "코크스, 석유 정제품 및 핵연료 제조업"의 경우 평균값은 수분함량 77.54, 가연분 18.25, 불연분 4.22%로 나타났다. 원소분석 결과 평균값은 "화합물 및 화학제품 제조업"의 경우 C 33.06, H 4.34, O 24.81, N 5.18, S 0.72wt%로 나타났으며, "코크스, 석유 정제품 및 핵연료 제조업"의 경우 C 36.58, H 4.74, O 26.79, N 5.09, S 0.49wt%로 나타났다. 열중량분석 결과, B사에서 배출되는 슬러지는 $700^{\circ}C$ 이상에서 그리고 F와 N사에서 배출되는 슬러지는 $600^{\circ}C$ 정도의 온도에서도 연소가 가능할 것으로 판단된다. 연소테스트 결과, 산화반응과 동시에 열분해 반응으로 고농도의 일산화탄소가 배출되므로 이로 인한 로의 국부과열이나 파손현상에 대한 기초자료를 얻는데 이용될 수 있을 것으로 판단된다.