• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년도 제31회 추계학술대회논문집
• /
• pp.243-246
• /
• 2008

하이브리드 연소에서 연소실 압력에 따른 고체 연료의 연소 특성을 실험적으로 연구하였다. 본 연구는 낮은 산화제 평균 질량 유속구간에서 고체 연료 후퇴율이 산화제 유속 뿐만 아니라 연소실 압력에 영향이 있는지 실험적으로 확인하였다. 연료로 Poly-Ethylene과 산화제로 GOX를 이용하였으며, 동일 산화제 유속에서 연소실 압력 변화는 6mm,9mm의 노즐 목 직경으로 사용하였다. 낮은 산화제 질량유속구간에서 고체연료 후퇴율이 산화제 유속뿐만 아니라 압력에 의한 영향이 있고, 동일 산화제 유속에서 압력이 증가 할수록 후퇴율이 증가함을 확인 하였다.

• 한국추진공학회지
• /
• 제17권2호
• /
• pp.122-127
• /
• 2013

고성능 폐회로 액체로켓엔진 시스템에 적용되는 산화제 과잉 예연소기 내에서 발생하는 연소 압력 섭동 데이터에 대한 분석 결과를 수록하였다. 연소실험은 두 단계의 압력 값을 순차적으로 형성하였는데 상대적으로 저압 조건에서만 78 Hz의 특성 주파수를 갖는 자발적인 압력 섭동이 발생하였다. 이와 같은 연소 불안정은 bulk mode에 해당하는 것으로 판단된다. 압력 섭동의 세기는 rms 기준으로 연소실 정압 대비 13.3%에 해당하며, 설계압 구간(19.3 MPa)에서는 매우 안정적인 모습을 보였다. 이와 같은 bulk mode는 연소실 내부에서 특성 압력파의 위상차가 없이 전체 공간에서 압력이 증가와 감소를 반복하는 것으로 Helmholtz 공진기와 비슷한 특성을 보이는 것으로 판단된다.

• 한국분무공학회지
• /
• 제2권1호
• /
• pp.18-28
• /
• 1997

The present study is mainly aiming at numerically analyzing the combustion and emission characteristics of the diesel spray in a high-pressure environment. Computations are peformed for the peak chamber pressure with range from 4.08 MPa to 162 MPa. Numerical results indicate that the pressure increase in combustion chamber significantly influences the mechanism for droplet dynamics and mixing characteristics, spray penetration autoignition, flame lift-on height and the propagation or fuel vapor and flame. By increasing the ratio or the ambient density to injected liquid density, the fuel-air mixing rates and the burning rates increase and the $NO_x/soot$ emission level decreases.

• Advances in aircraft and spacecraft science
• /
• 제9권6호
• /
• pp.537-551
• /
• 2022

The rapid decrease of fossil fuel resources and increase of environmental pollution caused by aviation industries have become a severe issue which leads to an increase in the greenhouse effect. The use of biofuel becomes an option to alleviate issues related to unrenewable resources. This study presents a computational simulation of the biofuel combustion characteristics of various alternative fuels in an annular combustion chamber designed for training aircraft. The biofuels used in this study are Sorghum Oil Methyl Ester (SOME), Spirulina Platensis Algae (SPA) and Camelina Hydrotreated Esters and Fatty Acids (CHEFA). Meanwhile, Jet-A is used as a baseline fuel. The fuel properties and combustion characteristics are being investigated and analysed. The results are presented in terms of temperature and pressure profiles in addition to the formation of NOx and soot generated from the combustion chamber. Results obtained show that CHEFA fuel is the most recommended biofuel among all four tested fuels as it is being found that it burns with 37.6% lower temperature, 15.2% lower pressure, 89.5% lower NOx emission and 8.1% lower soot emission compared with the baseline fuel in same combustion chamber geometry with same initial parameters.

• 한국추진공학회지
• /
• 제13권6호
• /
• pp.34-40
• /
• 2009

본 논문은 액체로켓엔진의 구성품인 연소기와 가스발생기의 연소 안정성 평가를 위한 평가 방법과 기준에 관해 서술하였다. 두 가지 평가 방법이 있는데, 첫 번째는 일반적인 정상 연소 시험을 통해 연소 안정성 여부를 판단하는 통계적인 접근 방식을 취하는 정적 평가와 두 번째로는 연소장에 압력 교란을 일으키는 장치를 이용, 생성된 펄스의 감쇠 특성을 파악하는 동적 평가가 있다. 누적된 실제 추진제 연소 시험 결과를 통해서 정적 평가의 안정성 여부는 Root-Mean-Square 값이 연소실 압력의 3%, 동적 안정성 여부는 가진된 압력 섭동의 감쇠시간이 10 msec로 기준을 설정하였다.

• 한국자동차공학회논문집
• /
• 제3권3호
• /
• pp.129-139
• /
• 1995

This study investigates the combustion characteristics of methane-hydrogen-air premixture in a constant volume combustion chamber. Primary factors of the combustion characteristics of methane- hydrogen-air premixture are the equivalence ratio and hydrogen supplement rate. In the case of $\phi$= 1.1, maximum combustion pressure and heat release rate have peaks, and they increase as the initial pressure and hydrogen supplement rate increase. The total burning time is also the shortest at the $\phi$= 1.1, it shorten by lowering the initial pressure and by increasing the hydrogen supplement rate. The maximum flame temperature is shown at the $\phi$= 1.0, and increasing the initial pressure and hydrogen supplement rate, it increases. The concentration of NO reveals the highest value at the $\phi$= 0.9, and it increases by increasing the initial pressure and hydrogen supplement rate. It is also found that the limit of lean inflammability of methane-hydrogen-air premixture is greatly widened by increasing the hydrogen supplement rate.

• Journal of Mechanical Science and Technology
• /
• 제16권7호
• /
• pp.935-941
• /
• 2002

This work is to investigate the combustion characteristics and flame propagation of the LPG (liquified petroleum gas) and gasoline fuel. In order to characterize the combustion processes of the fuels, the flame propagation and combustion characteristics were investigated by using a constant volume combustion chamber The flame propagation of both LPG and gasoline fuels was investigated by the laser deflection method and the high-speed Schlieren photography. The result of laser deflection method show that the error of measured flame propagation speed by laser method is less than 5% compared with the result of high-speed camera. The flame propagation speed of the fuel is increased with the decrease of initial pressure and the increase of initial temperature in the constant volume chamber. The results also show that the equivalence ratio has a grate effect on the flame speed, combustion pressure and the combustion duration of the fuel-air mixture.

• 한국분무공학회지
• /
• 제19권4호
• /
• pp.188-196
• /
• 2014

The spray and combustion characteristics of n-dodecane fuel were investigated in a CVCC (constant volume combustion chamber). The selection of ambient conditions for the spray followed ECN (engine combustion network) guidelines, which simulates the ambient condition of diesel engines at start of fuel injection. ECN is a collaboration network whose main objective is to establish an internet library of well-documented experiments that are appropriate for model validation and the advancement of scientific understanding of combustion at conditions specific to engines. Therefore repeatability of the experiments with high accuracy was important. The ambient temperature was varied from 750 to 930 K while the density was fixed at around $23kg/m^3$. The injection pressure of the fuel was varied from 500 to 1500 bar. The spray was injected in both non-reacting ($O_2$ concentration of 0%) and reacting conditions ($O_2$ concentration of 15%) to examine the spray and the combustion characteristics. Direct imaging with Mie Scattering was used to obtain the liquid penetration length. Shadowgraph was implemented to observe vapor length and lift-off length at non-reacting and reacting conditions, respectively. Pressure data was analyzed to determine the ignition delay with respect to the spray and ambient conditions.

• 한국추진공학회지
• /
• 제24권1호
• /
• pp.24-33
• /
• 2020

본 연구에서는 액체로켓엔진용 동축 와류형 분사기의 연소불안정 특성을 파악하기 위해 기체 추진제를 이용한 모델 연소실험을 수행하였다. 연소실 공진 주파수와 분사기 혼합조건의 영향을 알아보고자, 연소실 길이, 분사기, 리세스 길이, 추진제 혼합비를 변경하면서 연소실 압력섭동을 측정하였다. 실험 결과, 각 실험조건에 따른 압력섭동 변화를 확인하였으며 안정성 매핑을 통해 연소안정성을 평가하였다. 그리고 연소실 길이와 리세스 길이 변화에 따라 종방향 모드 및 켈빈-헬름홀츠 불안정이 발생함을 발견하였다.

• International Journal of Automotive Technology
• /
• 제6권4호
• /
• pp.323-332
• /
• 2005

A cylindrical constant volume combustion chamber was used to investigate the flow characteristics at the spark electrode gap and the combustion characteristics of a homogeneous charged methane-air mixture under various overall charge pressures, excess air ratios and ignition times. The flow characteristics, including the mean velocity and turbulence intensity, were analyzed with a hot wire anemometer. Combustion pressure development measured by piezoelectric pressure transducer, a flame propagation image acquired by ICCD camera and exhaust emissions measured by 2-valve gas chromatography were used to investigate effects of initial pressures, excess air ratios and ignition times on the combustion characteristics. It was found that the mean velocity and turbulence intensity had the maximum value around 200-300 ms and then decreased gradually to a near-zero value after 3000 ms and that the combustion duration was shorten and the flame speed and laminar burning velocity had the highest value under the condition of an excess air ratio of 1.1, an overall charge pressure of 0.15 MPa and an ignition time of 300 ms in the present study. The $CO_2$ concentration was proportional to the ignition time and overall charge pressure, the $CO_2$ concentration was proportional to the excess air ratio, and the UHC concentration was inversely proportional to the ignition time and overall charge pressure.