• 유기물자원화
• /
• 제9권4호
• /
• pp.105-110
• /
• 2001

쓰레기의 효과적인 처리방안을 제시하고 장래 대책을 수립하는데 자료로 활용하도록 하기 위해서 순천시 생활쓰레기의 물리 화학적 특성을 조사하였다. 발생 쓰레기의 계절별, 성상별 특성을 조사 분석하여 다음의 결과를 얻었다. 생활쓰레기의 겉보기밀도는 가연성쓰레기가 $219kg/m^3$, 비가연성쓰레기는 $391kg/m^3$로 나타났다. 가연성쓰레기 중에서 음식물쓰레기의 습윤질량 중량비 가중평균은 38.1%를 차지하였으며, 음식물쓰레기를 제외한 가연성쓰레기는 49.6%를 나타내었다. 음식물쓰레기를 제외한 가연성쓰레기의 수분함량, 가연분함량 및 회분함량의 가중평균은 각각 16.9%, 68.1% 및 15.0%로 나타나 소각처리의 특성이 양호하게 나타났다. 음식물쓰레기를 제외한 가연성쓰레기의 저위발열량은 2,962kcal/kg로 나타나 소각처리의 특성이 아주 양호하게 나타났다.

• 한국대기환경학회지
• /
• 제16권4호
• /
• pp.299-308
• /
• 2000

This study analyzed solid wastes generated from a school. The emission potential of hazardous pollutants generated from incineration of the school solid wastes (SSWs) was analyzed. Components of the SSWs were identified and the SSWs were classified into combustible and non-combustible wasts. The combustible wastes consisted of papers of 56.5^ plastics of 30.2% woods of 7.1% and fibers of 6.1% based on weight of the wastes. The moisture content and the ash content of the combustible wastes were 18~20% and 11~13% respectively. The combustible wastes of the SSWs were incinerated by using a small-scale incinerator. Fly and bottom ashes and volatile organic compounds (VOCs) were collected from the incineration. Also the metal leaching experiments on the fly and bottom ashes were performed, In analysis of metals leached from the ashes the total amounts of metals leached in the acid solution (pH=3) were much greater than those in the neutral solution (pH=5.8~6.2) For the same amounts of the fly and bottom ashes the total amounts of metals leached from the fly ashes were much greater than those from the bottom ashes. The VOCs produced from incineration of the SSWs consisted of aromatics of 42.1% aliphatic alkenes of 26.3% oxidized forms of 17.3% and aliphatic alkanes of 14.3% In addition the considerable amounts of hazardous air pollutants (e.g benzene chloro-benzene and chloro-alkanes) and compounds (e. g, aliphatic alkenes) with high potential of ozone or photochemical smog formation were identified from the incineration experiment of the SSWs.

• 한국환경보건학회지
• /
• 제29권4호
• /
• pp.35-41
• /
• 2003

The objective of this study was investigate the generation rates, composition, proportion and calorific values each of material in the municipal solid wastes as well as the effect of incineration residual leachate on the environment in Yangsan sanitary landfill site. The results were as follows ; The annual average generation rate of municipal solid wastes in Yang-san is approximately 2.0 kg/cㆍd. The weight percent of combustible matters is on average 78∼87% and the lower heating values of municipal solid wastes is measured to be more than 2,151 kcal/kg after removing the briquette component. The food waste was major source of solid wastes in Yang-san city as 35% and its variation by seasons was negligible. Combustible part was larger than incombustible part of the domestic solid wastes in spring and summer. It is recommended that municipal solid wastes be treated by multiple methods such as the sanitary landfill, resources and recovery, composting and incineration.

• 한국건설순환자원학회논문집
• /
• 제4권1호
• /
• pp.89-95
• /
• 2009

현행 "건설폐기물의 재활용 촉진에 관한 법률" 시행령 별표1에서는 다양한 성상으로 배출되는 건설폐기물의 종류를 17가지로 구분하고 이중 제17호의 혼합폐기물은 건설폐토석을 제외한 나머지 15가지 성상의 건설폐기물중 둘 이상의 건설폐기물이 혼합된 것으로 정의하고 있다. 이중 폐콘크리트, 폐아스콘과 같은 건설폐재류는 대부분이 순환골재와 같이 재활용되고 있으며 폐금속과 같은 유가성 자재류는 대부분 분리 판매되어 2차 제품 제조등에 활용되고 있다. 그러나 폐목재, 폐합성수지, 폐섬유 등과 같은 가연성 폐기물의 경우 발열량이 높고 인체에 해로운 중금속 함유량이 적어 RDF나 RPF와 같은 에너지 연료로 활용이 가능하지만 상당량이 혼합폐기물 형태로 배출되어 단순 소각 및 매립되고 있는 실정이다. 그러므로 본 연구에서는 단순하게 외관상의 분류만을 고려하여 설정한 현행 "건폐법"과는 달리 최초 발생단계에서부터 최종처리까지 건설폐기물의 흐름을 보다 효율적으로 제어할 수 있도록 건설폐기물의 분류를 크게 가연성, 불연성, 가연성 불연성 혼합, 기타 등으로 분류하였다. 가연성 폐기물의 경우 기존의 소각 폐기물을 중심으로 폐목재, 폐섬유 등 기존의 소각 폐기물을 중심으로 분류를 하고 불연성은 재활용이 원활한 건설폐재류와 기타로 구분, 혼합건설폐기물은 발생 자체부터 서로 다른 물질이 결합되어 있어 분리 자체가 어려운 폐기물을 대상으로 하였다. 또한 이상에서 폐기물은 지정폐기물을 제외하고 모든 기타 폐기물로 분류하도록 하였으며 기본적으로 건설현장에서 발생하는 폐기물은 1차적으로 가연성, 불연성, 혼합폐기물로 분류하여 배출하는 시스템이 되도록 폐기물의 분류를 실시하였다.

• 한국재난정보학회 논문집
• /
• 제4권1호
• /
• pp.86-100
• /
• 2008

It is needed to classify the kinds of construction and demolition(c&d) debris to 6 catagories of waste concrete, waste asphalt concrete, waste wood, scraps, combustible waste and incombustible waste in order to properly do a separate discharge and to estimate unit generation rate in construction site. Also, in this case, the unit treating cost for mixed wastes should be applied with the unit treating cost for combustible waste. The construction standard materials estimation data is used for basic data for estimating unit generation rate. The mixed wastes in this data should be classified to waste wood, combustible waste and incombustible waste, and their ratio is obtained by using the unit generation rate of Asia Pacific Environment and Management Institute and Seoul Metropolitan Development Institute. The waste amounts generated from newly-built construction can be obtained from multiplying the loss rate by the amount of materials used from construction standard estimation data. Also, those from dismantling construction can be obtained by subtracting waste amount generated during newly-built construction from total input amount of materials in newly-built construction. Those in two cases can be used in construction site. It can be used for estimating the amount generated and establishing the treating plan in the case of setting up the policy of waste management and doing the environment impact assessment.

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 2001년도 추계 학술발표회 논문집
• /
• pp.377-380
• /
• 2001

• KIEAE Journal
• /
• 제1권1호
• /
• pp.45-52
• /
• 2001

This study aims to make a fundamental data for a policy-making decision in treatment and disposal of municipal solid wastes and presents a research data on the discharge properties of municipal solid wastes and making a unit of them in the Taegu metropolitan city. The results can be summarized as follows; survey the discharge properties of municipal solid wastes, calorific values and to present a research-data in supplying incineration-heat of wastes with the area of Sung-seo in Taegu. So, using fundamental data for planning and running wastes-incineration plants as well as trying to make better Urban Environmental Infra-structure. The results are obtained from the study. 1) The proportion of combustible wastes in Taegu increased from 89.6% to 94.47% during 1993~2000. However, the proportion of incombustibles decreased from 10.4% to 5.53% during 1993~2000. 2) The value of representative properties is about 1500~2000kcal/kg. So we can expect that it should be made use of energy-resources positively. 3) The heat from Sung-seo wastes-incineration plants is used to produce electronic-energy for wastes-incineration plants in summer season. The heat from Sung-sea wastes-incineration plants is in charge of 27% which of supplying the area of Sung-seo with district heating energy in winter season.

• 유기물자원화
• /
• 제17권1호
• /
• pp.27-38
• /
• 2009

본 연구는 유기성폐기물인 음식물폐기물과 하수슬러지를 가연성폐기물을 혼재하여 연료로 사용하기 위해서 제조과정과 연소공정에서 발생되는 특성을 분석하였다. 연료화 재질의 특성은 연도분석기를 이용하여 배연가스 성분을 조사하였고, 발열량은 봄베식 열량계를 이용하여 분석하였다. 연료화 재료의 특성연구를 위하여 기초조사 수분함량(%), 가연성 폐기물 비율, 회분량, 중금속, 각 성분 원소분석, 발열량, 중량 혼재비율에 따라서 분석하였다. $RDF_{k-1}$의 연료는 건조하수슬러지, 음식물폐기물 및 가연성폐기물 혼재비율에 따라 제조하였고, $RDF_{k-2}$는 피트모스, 타르 및 하수슬러지 혼합비율에 의해서 제조하였다. 연소실험은 공기비 2와 연소온도 $850^{\circ}C$의 최적조건 상태에서 실험을 실행하였다. 연소실험장치에서 연소시간 5, 10, 15분의 간격으로 실험하였다. 연소장치로의 주입 연료량은 50g을 주입하여 실행하였다. $RDF_{k-1}$의 연료는 혼재비율에 따라서 발열량 실험결과 6,900에서 8,120 kcal/kg까지 분석되었고, $RDF_{k-2}$는 4,014에서 8,050 kcal/kg까지 나타났다. 연도실험에서 연소의 효율은 RDF의 발열량, 수분, 원소구성성분과 재질의 다양한 혼재비율에 큰 영향을 미치는 것으로 나타났다. 제조된 연료의 $RDF_{k-1}$ 연소실험에서 가연성 성분의 혼재비율이 높은 경우 발열량과 $C_xH_y$ 농도 및 회분량이 증가하였다. $RDF_{k-2}$ 경우는 tar의 혼재비율의 증가함에 따라 발열량은 증가하나 회분량, CO와 $C_xH_y$의 농도발생이 증가하는 것으로 나타났다.

• 한국환경보건학회지
• /
• 제13권1호
• /
• pp.17-33
• /
• 1987

As a result of technical advances and industrialization, the characteristics of domestic and industrial wastes are becoming more complex. Accordingly, improved treatment and disposal systems are being continuously sought to take account of complex characteristics and to comply with economic restrictions. In this study, an application of pyrolysis to the treatment of industrial wastes, including waste scrap rubber, waste raw material used in making the slipper bottom and waste PVC pipe, and the effectiveness of pyrolysis in resource recovery from these wastes were investigated. Batches of wastes were pyrolysed by external heating to a temperature of 400-800$\circ$C in a 32 mm diameter x 0.9 m long silica tube to produce combustible gases, oils and chars. Before the start of pyrolysis runs, the entire system was purged with nitrogen gas to exclude the air. The temperature inside the retort was controlled by the thermocouple in the gas stream, and referred to as the pyrolysis temperature. Under these conditions three products were separately collected and further analyzed. The results were summarized as follows. 1. More gases and less chars were produced with higher pyrolyzing temperature and with higher rates of heating, but the yields of oils tended downwards at temperatures above 700$\circ$C. Accordingly, operating conditions of pyrolysis should be varied with desired material. 2. Calorific values and sulfur contents of produced oils were sufficient and suitable for fuel use. Chars from waste rubber had high heating values with low sulfur contents, but calorific values of chars from waste PVC and waste slipper were as low as 3, 065-4, 273 kcal/kg and 942-2, 545 kcal/kg, respectively. Therefore, char from these wastes are inappropriate for fuel. 3. Soluble contents of Pb, Cd, Cu and Zn in chars from waste rubber and waste slipper were below the Specific Hazardous Waste Treatment Standards. However soluble contents of Pb and Cd in chars from waste PVC were one or two times and five or seven times exceedingly the Specific Hazardous Waste Treatment Standards, respectively. 4. Post high heating is desirable for treatment method of waste PVC which generates toxic hydrogen chloride. 5. The proportions of hydrogen, methane and ethane in produced gases were in the range of 3.99-35.61% V/V, 18.22-32.50% V/V and 5.17-5.87% V/V, respectively. 6. Pyrolysis is a useful disposal method in case of waste slipper, which was hardly combustible, and thus investigations of this kind of materials are required for effective management of industrial waste. 7. Based upon the possible market development for products, overall pyroly economics to take account of treatment values of noncombustible or hazardous materials should be evaluated.

• 한국환경보건학회지
• /
• 제18권1호
• /
• pp.63-68
• /
• 1992

This study was performed to investigate the seasonal variation of the composition of domestic solid wastes and the characteristics of the leachate sampled in In-Cheon sanitary landfill site. The results were as follows 1. Combustible part was larger than incombustible part of the domestic solid wastes in spring and sumer. 2. The food waste was major source of solid wastes in In-Cheon city as 36.5%, and its variation by seasons was negligible. 3. BOD of the leachate was in the range of 853~7, 350mg/l, and fluctuated by seasons. 4. The mean of COD$_{cr}$ Was 5, 044mg/l, the mean of COD$_{Mn}$ was 2, 212mg/l. Namely, the method by $K_{2}Cr_{2}O_{7}$ was more sensitive than the method by KMnO$_{4}$. 5. TOC was in the range of 773~3, 958mg/l, it was lower than BOD.