• Applied Biological Chemistry
• /
• v.47 no.3
• /
• pp.332-338
• /
• 2004

An investigation in search of the best oxidizing agent for smoke generators using rice chaff as a combustible carrier was carried out. Smoke rods formulated with active ingredients (AIs) such as inorganic oxidizing agents, glue, and powdered rice chaff, showed constant and high burning rate and high smoking rate on 11 kinds of pesticides. Sodium chlorate was the most suitable oxidizing agent for smoke rod. Even though the sodium chlorate content of the formulation showing the highest smoking rate of AI was variable to pesticides, the smoking rate appeared to increase as the burning rate increased. Active ingredients in smoke generator using rice chaff as a combustible carrier were stable for 60 days when stored at $50^{\circ}C$. An apparatus designed for smoke trapping was useful to collect smoked active ingredients.

• Journal of Sensor Science and Technology
• /
• v.15 no.1
• /
• pp.34-39
• /
• 2006

This study provides the electrical model of combustible catalytic gas sensor. Physical characteristics such as thermal behavior, resistance change were included in this model. The finite element method analysis for sensor device structure showed that the thermal behavior of sensor is expressed in a simple electrical equivalent circuit that consists of a resistor, a capacitor and a current source. This thermal equivalent circuit interfaces with real electrical circuit using two parts. One is 'power to heat' converter. The other is temperature dependent variable resistor. These parts realized with the analog behavior devices of the SPICE library. The gas response tendency was represented from the mass transferring limitation theory and the combustion theory. In this model, Gas concentration that is expressed in voltage at the model, is converted to heat and is flowed to the thermal equivalent circuit. This model is tested in several circuit simulations. The resistance change of device, the delay time due to thermal capacity, the gas responses output voltage that are calculated from SPICE simulations correspond well to real results from measuring in electrical circuits. Also good simulation result can be produced in the more complicated circuit that includes amplifier, bios circiut, buffer part.

• Resources Recycling
• /
• v.18 no.6
• /
• pp.54-59
• /
• 2009

The level manufacturing technique for refuse derived fuel (RDF) is possible to produce them itself by a domestic process which is appropriate in Korea. However, very few facilities were used for industrial combustible waste. The objective of this research is to develop the technique for refuse plastic fuel (RPF) of industrial waste. RPFs were prepared by mixing of plastic, paper and wood based on amount of regional waste. The physical properties of the RPFs prepared were investigated. RPFs prepared at mixing ratio(plastic : paper : wood) of 87.55% : 8.15% : 4.3% show the highest lower heating values in wet-base (LHVW) and the LHVW decreases as the mixing ratio of paper and wood increases.

• Korean Chemical Engineering Research
• /
• v.55 no.1
• /
• pp.40-47
• /
• 2017

Dust explosion hazards are always present when combustible dusts are manufactured or handled in the process. However, industries is experiencing difficulty in establishing chemical accident prevention measures because of insufficiency of information on dust explosion characteristics of combustible dust handled in industry. In this study, we investigated experimentally dust explosion characteristics of two kinds of multi-walled carbon nano tubes (MWCNT) different in particle size distribution and examined classification of dust explosion hazardous area for MWCNT manufacturing or handling process by applying the NFPA 499 code. As a result, $P_{max}$, $K_{st}$, LEL, MIE and MIT of MWCNT 1 having $124.2{\mu}m$ median diameter are obtained 6.3 bar, $56bar{\cdot}m/s$, $125g/m^3$, over 1000 mJ, and over $650^{\circ}C$. $P_{max}$, $K_{st}$, LEL, MIE and MIT of MWCNT 2 having $293.5{\mu}m$ median diameter are 6.2 bar, $42bar{\cdot}m/s$, $100g/m^3$, over 1000 mJ, and over $650^{\circ}C$, respectively. MWCNT 1, 2 are not categorized as combustible dust listed in the NFPA 499 Code for classification of dust explosion hazardous area because explosion severity and ignition sensitivity of MWCNT 1, 2 are below 0.35 and 0.01, respectively.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.14 no.3
• /
• pp.138-147
• /
• 2006

In this study, the composition and physico-chemical characteristics of municipal solid waste (MWS) which was treated in national park area kyungnam-do landfill were investigated. It is necessary to measure the characteristics of MSW and sludge to build a waste treatment facility, the data-base and total managing of the landfill. This MSW was composed of 34.62% of food wastes, 36.05% of papers, 15.37% of plastics & vinyls, 2.28% of textiles, 3.33% of wood, 0.49% of rubber & leathers and others, respectively. Most of MSW are composed of food, paper and plastic waste and more than 90% was combustible waste. For three components, moisture is 29.84%, combustible component is 62.30% and ash is 7.86%. The chemical element has the high order of carbon, oxygen, hydrogen on the dry basis of wastes. Also, the low heating value of the MSW which is measured by calorimeter is calculated as 2377.8kcal/kg. low heating value of the sludge is calculated as 338.06kcal/kg.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.16 no.3
• /
• pp.65-74
• /
• 2008

In this study, the composition and physico-chemical characteristics of municipal solid waste (MWS) which was treated in four different area were investigated. It is necessary to measure the characteristics of MSW to build a waste treatment and Refuse Derived Fuel (RDF) facility, the data-base and total managing of the landfill. It was found that the average density of solid wastes is in the range of $78.15-199.8kg/m^3$. This MSW was composed of 8.87% of food wastes, 38.8% of papers, 34.12% of plastics & vinyls, 7.16% of textiles, 0.96% of wood, 1.3% of rubber & leathers and others, respectively. Most of MSW are composed of food, paper and plastic waste and more than 94% was combustible waste. For three components, moisture is 17.38%, combustible component is 69.03% and ash is 6.24%. The chemical element has the high order of carbon, oxygen, hydrogen on the dry basis of wastes. And the low heating value of the MSW which is measured by calorimeter is calculated as 2973.8 kcal/kg and high heating value of the MSW is calculated as 5209.94 kcal/kg.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.17 no.2
• /
• pp.101-111
• /
• 2009

In this study, the physico-chemical characteristics of municipal solid waste (MWS) which was treated in gangwon area were investigated. It is necessary to measure the characteristics of municipal solid waste for build a waste treatment and RDF facility and for data-base and total managing of the landfill. It was found that the average density of solid wastes is in the range of $101.8{\sim}199.8kg/m^3$. This MSW was composed of 30.7% of food wastes, 36.3% of papers, 15.8% of plastics & vinyls, 1.9% of textiles, 3.2% of wood and 1.5% of rubber & leathers respectively. Most of MSW are composed of food, paper and plastic waste and the combustible waste is more than 90%. For three components, moisture is 44.6%, combustible component is 47.7% and ash is 7.7% respectively. The chemical elements are carbon, oxygen, and hydrogen on the dry basis of wastes. The low heating value of the MSW measured by calorimeter was obtained as 2,631 kcal/kg, and the high heating value of the MSW was obtained as 3,310 kcal/kg.

• Journal of the Korean GEO-environmental Society
• /
• v.10 no.3
• /
• pp.47-52
• /
• 2009

The comparative analysis on physico-chemical characteristics of municipal solid waste from dwelling site and landfill site were performed to provide the fundamental information of waste management in Chungju city. It was analysed and evaluated the bulk density, physical component, three major component, chemical component, and heating value of MSW. The physical components depended on the sampling site in dwelling site and landfill site. But, by the ultimate analysis, the chemical composition was almost similar to result for municipal solid waste from dwelling site and landfill site. Therefore, it is necessary to investigate the physical components according to sampling site for the MBT to introduce for combustible municipal solid waste pre-treatment, but it needs the chemical composition from landfill site to design the incinerator. The physical composition showed that the combustible and the noncombustible occupied 87.4% and 12.6% respectively. In case of three component analysis, the moisture, the combustible, and the ash were 27.6, 60.5, 11.9% respectively. The chemical composition through the element analysis were C (50.1%), H (6%), O (39.5%), N (1.9%), S (0.5%), and Cl (1.3%).

• Journal of the Korean Society of Safety
• /
• v.20 no.1 s.69
• /
• pp.87-93
• /
• 2005

In this paper, we analyzed ignition characteristics of combustible material and the waveform of power dissipation, voltage and current by poor contact. And the surface structure of plug by poor contact was analyzed. In the results of experiment, the heat generated by poor contact and ignited the combustible material on power cord sets. The insulation material was molten and carbonized by the heat conduction though plug pit and voids were formed inside of insulation material. The waveform of voltage and power dissipation distorted because of a growth of oxidation by poor contact. In particular, in case that load was big load, the waveform of voltage and power dissipation severely distorted as with the passage of time. The surface of plug pin was changed from erosion mark to welding mark according to big load. The results will be applied to the cause analysis of electrical disaster.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.16 no.1
• /
• pp.70-78
• /
• 2008

In this study, the composition and physico-chemical characteristics of school waste which is located in B area, kyunggi-do was investigated. It is necessary to measure the characteristics of school waste to build the data-base for resource and recycling of waste. This school waste was composed of 12.25% of food wastes, 56.26% of papers, 9.26% of plastics&vinyls, 1.52% of textiles, 3.70% of wood, 0.11% of rubbers&leathers and others, respectively. Most of school wastes are mainly composed of paper and plastic waste and composition of combustible waste was about as 90%. From 3-components analysis, contents of moisture, combustible component, and ash was 5.72%, 88.29% and 5.98%, respectively. Moisture content was higher in Agricultural Dwelling school area compare to the urban dwelling school area. The chemical element of the school waste has the high order of carbon, oxygen, hydrogen on the dry basis of wastes and the low heating value of the MSW which is measured by calorimeter is shown as 3720.44kcal/kg.