• Journal of applied mathematics & informatics
• /
• v.41 no.5
• /
• pp.973-988
• /
• 2023

In real-life scenarios, we may have to deal with real numbers or numbers in intervals or a combination of both to solve multi-criteria decision-making (MCDM) problems. Also, we may come across a situation where we must combine this interval and actual number membership values into a single real number. The most significant factor in combining these membership values into a single value is by using aggregation operators or scoring algorithms. To overcome such a situation, we suggest the cubic hypersoft set (CHSS) concept as a workaround. Ultimately, this makes it simple for the decision-maker to obtain information without misconceptions. The primary aim of this study is to establish some operational laws for the cubic hypersoft set, present the fundamental properties of aggregation operators and propose an algorithm by using the technique of order of preference by similarity to the ideal solution (TOPSIS) technique based on correlation coefficients to analyze the stress-coping skills of workers.

• Asian-Australasian Journal of Animal Sciences
• /
• v.11 no.2
• /
• pp.117-120
• /
• 1998

Relationships of breeding values of sires for first lactation milk yield with pedigree information or indices were examined to identify the optimal criteria of selecting young dairy bulls for future use in artificial insemination (AI). Records of performance data on 1087 crossbred daughters (Holstein - Friesian, Jersey and Brown Swiss with Hariana) of 147 sires, generated at Livestock Production Research (Cattle and Buffaloes) Farm, IVRI, Izatnagar, U.P., during 1972 - 1995 were used to obtain the estimates of sire's breeding values (EBV) using the Best Linear Unbiased Prediction Procedures. The correlations between young bull's EBV and the dam's first lactation milk yield was non-significantly different from zero. However, the young bull's EBV was negatively and significantly related (r = - 0.275 ; P < 0.05) to the dam's best lactation milk yield, suggesting that the selection of young dairy bulls from high yielding elite dams is not a suitable criteria for genetic improvement. The correlations of sire's and paternal grandsire's EBV's with young bull's EBV were high and positive (0.532, 0.844; P < 0.01). The maternal grandsire's EBV was positively but non-significantly related to grandson's EBV. The pedigree index incorporating dam's milk records and sire's EBV's showed a negative and non-significant correlation with young bull's EBV. However, the correlation of a pedigree index $(I_3)$ combining information on sire's and paternal grand-sire's EBV's with young bull's EBV's was considerably high and positive (0.797; P < 0.01). The regression coefficients of young bull's EBV on pedigree index $I_3$, was higher than those on other pedigree information. These results revealed that there was no advantage in basing selection on dam's performance or maternal grand-sire's EBV and that sire's and paternal grandsire's EBV's were reliable pedigree information for selection of young dairy bulls for future use in AI.

• Journal of Astronomy and Space Sciences
• /
• v.1 no.1
• /
• pp.55-65
• /
• 1984

A total of 618 photoelectric observations (302 in yellow and 316 in bule) is made in 1982 at the Yonsei University Observatory. Except that of the secondary eclipse the homogeneous coverage of observations successfully secured B, V, and B-V light curves. Enhanced distortions in the light curves are appeared at the phases aroung $0.^P1$, which supports the wave-like migration period of 9.7 years(Rodono 1981). One epoch time of the primary minimum was made by combining the observations in three nights. This minimum time shows that the O-C values are still decreasing and there seems to indication of increasing. B and V light curves of the primary minimum are in strong asymmetry which show less luminous in the third and fourth contacts compared to those of the first and second ones. This asymmetry may be as a result of the reflection of the wave minimum at $0.^P1$, and B-V curve also shows asymmetry, redder at the third contact than the second one by about $0.^m04$. This color difference apperature distribution on the surface of cooler, larger component(KO IV star).

• Korean Journal of Soil Science and Fertilizer
• /
• v.6 no.1
• /
• pp.29-31
• /
• 1973

Upon the assumption that the available components in the soil evaluated by present analytical procedures, are as effective as the components applied to the soil as fertilizer, some formulas for the calculation of fertilizer requirements (F. R) for crops are suggested. Basically, the formulas are derived by combining the country average values of soil test data(${\overline{ST}}$) and of the optimum rate of fertilizers (ORF) for crops obtained from N.P.K. trials in farmer's field, as following. $$F.R(kg/10a)={\overline{ST}}(kg/10a)+ORFkg/10a-ST(kg/10a)$$ where, ST denotes the available components tested in the soil under question. Although this formula can be used both for P and K fertilizers, considering the significance of the potassium saturation rate of the soil for the availability of K, for the calculation of K fertilizer requirement, following formula is suggested. $$F.R(kg/10a)=(C.E.C.{\times}B.S.R.K.-KST(me/100g){\times}CF$$ where, B. S. R. K. is the basic potassium saturation rate of the soil and CF is conversion factor for the conversion of K me/100g into $K_2O$ kg/10a. The B. S. R. K. for different crops are obtained from the country average values of soil exchangeable K (${\overline{KST}}$), cation exchange capacity (CEC) and the optimum rates of K fertilizers for crops (ORF $K_2O$). $$B.S.R.K.=\frac{{\overline{KST}}{\times}CF+ORF(K_2O)}{CEC{\times}CF}$$ Using these formulas, equations for P and K fertilizer requirements for rice, barley, wheat, corn, italian millet, soy bean, sweet potato, potato and rape are derived.

• Korean Journal of Food Science and Technology
• /
• v.18 no.1
• /
• pp.24-30
• /
• 1986

The model foods similar to general Korean foods were prepared by combining starch, protein and moisture, and relationship between their thermal diffusivities and components were investigated. Thermal diffusivity of the model foods tended to be proportional with the moisture content. Under the same level of moisture content of the model foods, thermal diffusivity of the starch foods was higher than that of the protein foods, but no interaction among components was found. The measured values was quite agreed upon with the calculated values with 3.60 residual percent. The regression equations between thermal diffusivity and moisture, protein and starch contents at $20^{\circ}C$ and $60^{\circ}C$ were ${\alpha}20^{\circ}C$ = 0.04911M+0.37355P+3.73072, ${\alpha}60^{\circ}C$ = 0.05353M-0.4766P+4.15136, respectively. The correlation coefficients obtained according to the above equation were $0.9650^{**}$ and $20^{\circ}C$ and $0.9002^{**}$ at $60^{\circ}C$.

• Applied Chemistry for Engineering
• /
• v.32 no.6
• /
• pp.700-705
• /
• 2021

A portable and disposable pH sensor based on Ti wire was successfully developed for monitoring hydronium ion concentrations. A sensing electrode was prepared by electrochemically depositing iridium oxide onto a Ti wire, while a reference electrode was fabricated by coating Ag/AgCl ink on a Ti wire. Combining the two electrodes in the pH sensor enabled the collection of open circuit potential signals when the sensor was immersed in solutions of various pH values. The pH sensor exhibited excellent electrochemical sensing performance in terms of sensitivity, response time, repeatability, selectivity, and stability. To demonstrate point-of-measurement applications, the pH sensor was integrated with a wireless electronic module that could communicate with a mobile application. The portable pH sensor accurately measured pH changes in real samples. The results obtained were consistent with those of using a commercial pH meter.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.17 no.2
• /
• pp.11-16
• /
• 1980

For vibration analysis of stiffened plates the orthotropic plate analogy is commonly accepted. As to stiffened plates in contact with water, however, there is still much uncertainty in estimation of the added mass because of the lack of direct methods. The authors, considering that for added mass of plates there are many reliable data derived theoretically or experimentally available, suggest a method to estimate the added mass of a stiffened plate by combining the mass increase factor, $\beta$, of an equivalent orthotropic plate and the correction factor, $\kappa$, for the effects of stiffeners. The latter is to be derived from systematic experimental investigations. Then, the natural frequency in water, f', can be calculated from that in air, f, by the equation $f'=f/\sqrt{1+\kappa\beta}$. To investigate practical applicability of this method, a systematic experiment was carried out with five uniaxially stiffened plates. Each of them had a plate of same size, $600mm{\times}600mm{\times}3.2mm$, but stiffeners of different size in the web-depth, 41.6mm, 51.2mm or 66.8mm and of different spacing 75mm, 100mm, or 150mm. Natural frequencies were measured under simply supported-edge conditions in both air and water, and corresponding $\kappa$ values derived. In spite of wide variations of web-depth and spcae of stiffeners, the experimental results show that the diversity of $\kappa$ values is not remarkable; mean values of $\kappa$ are 1.31 with standard deviation of 0.025 for the first modes and 1.27 with that 0.077 for the second modes. Hence, the authors concluded that the above $\kappa$ values can be used generally for the cases of uniaxially stiffened plates both sides of which contact with water, and that $\kappa$ values of general use for the cases of cross-stiffened plates may also be obtainable from similar experiments.

• 한국해양학회지
• /
• v.26 no.2
• /
• pp.108-116
• /
• 1991

A production model was constructed by combining the production rate and biomass of Sargassum confusum measured at monthly intervals on the coast of Ohori, Korea, to estimate the algal production for a given period. The production for a certain period, e.g., for a year (P/SUB yr/), was calculated from the equation: P/SUB yr/ = .int.P/SUB t/$.$B/SUB t/dt, where pl and Bl are the production rate and biomass at time t. P/SUB l/ was considered as a function of temperature and light. Photosynthesis-Irradiance curves obtained from the in situ experiments were applied for P/SUB l/ Temperature and light intensity can be expressed as periodic functions of time (T, L=f(t)). Diurnal values of water temperature and light intensity at 3 m depth where S. confusum mainly found were substituted into the equation of P/SUB l/. Simulations using our models show that temperature was one of the most sensitive factors operating on the primary production. Thirty percent decrease of light intensity by cloud cover was estimated to decrease the annual production by 5%.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.3 no.3
• /
• pp.153-160
• /
• 1991

Heat transfer characteristics of a direct contact heat exchanger utilizing sieve trays and spray nozzles for steam condensation for the purpose of combining with a LNG evaporator have been investigated with various cooling water flow rates and different vacuum pressures within the heat exchanger for the purpose of steam condensation. Temperature profiles and the volumetric overall heat transfer coefficients in a direct contact heat exchanger have been obtained for comparisons. The results show that the temperature differences between cooling water and steam along the direct contact heat exchanger height are rapidly decreasing and the volumetric overall heat transfer coefficients of the exchanger improves greatly as the inside vacuum pressure increases. The values of the overall heat transfer coefficients at P=-680mmHg have been increased significantly compared with at atmospheric pressure. At given pressure conditions, it is found that the values of average volumetric overall heat transfer coefficients for the sieve tray are found to be approximately 10% higher than those of the spray nozzle.

• Restorative Dentistry and Endodontics
• /
• v.44 no.1
• /
• pp.1.1-1.12
• /
• 2019

Objectives: The aim of this in vitro study was to test the effect of 2 finishing-polishing sequences (QB, combining a 12/15-fluted finishing bur and an EVO-Light polisher; QWB, adding a 30-fluted polishing bur after the 12/15-fluted finishing bur used in the QB sequence) on 5 nanotech-based resin composites (Filtek Z500, Ceram X Mono, Ceram X Duo, Tetric Evoceram, and Tetric Evoceram Bulk Fill) by comparing their final surface roughness and hardness values to those of a Mylar strip control group (MS). Materials and Methods: Twelve specimens of each nanocomposite were prepared in Teflon moulds. The surface of each resin composite was finished with QB (5 samples), QWB (5 samples), or MS (2 samples), and then evaluated (60 samples). Roughness was analysed with an optical profilometer, microhardness was tested with a Vickers indenter, and the surfaces were examined by optical and scanning electron microscopy. Data were analysed using the Kruskal-Wallis test (p < 0.05) followed by the Dunn test. Results: For the hardness and roughness of nanocomposite resin, the QWB sequence was significantly more effective than QB (p < 0.05). The Filtek Z500 showed significantly harder surfaces regardless of the finishing-polishing sequence (p < 0.05). Conclusions: QWB yielded the best values of surface roughness and hardness. The hardness and roughness of the 5 nanocomposites presented less significant differences when QWB was used.