• 한국소음진동공학회논문집
• /
• 제20권11호
• /
• pp.1038-1045
• /
• 2010

The theory for a new electromagnetically biased combined radial and axial magnetic bearing is developed. This combined magnetic bearing uses two axial coils to provide the bias flux to the radial and axial air gaps of the combined bearing. One dimensional magnetic circuit model for this combined magnetic bearing is developed and analyzed such that flux densities and magnetic forces can be obtained. Three dimensional finite element model for the bearing is also developed and analyzed. Numerical analysis shows that the calculated magnetic forces from 1D model are well matched with those from the finite element model.

• 한국자기학회지
• /
• 제4권2호
• /
• pp.106-113
• /
• 1994

초전도 반발식 자기부상열차의 동특성을 해석하기 위하여 외력에 의하여 대차가 기울어진 경우에 차량에 가해지는 전자력을 계산하였다. 집중부하방식의 열차에 있어서 크게 나타나는 단부효과 를 고려하기 위하여 공극자속의 형태에 대한 가정없이 자속분포를 계산하였으며, 대차의 옆질(roll), 뒷질(pitch) 및 편주(yaw)시의 전자력특성과 복원토오크를 검토하였다. 6개의 초전도자석이 탑재된 대 차가 차량의 양쪽에 설치된 열차에 대해서 계산한 결과, 토오크의 방향은 차량을 안정하게 하는 방향 으로 나타나서 본 자기부상시스템은 기본적으로 안정한 시스템임을 보여주고 있다.

• Journal of Power Electronics
• /
• 제9권2호
• /
• pp.243-258
• /
• 2009

Bearingless centrifugal pump systems are employed in the semiconductor, pharmaceutical and medical industries due to their facility for pumping high purity fluids without particle contamination. Two types of forces have to be generated by the stator units, namely bearing forces for achieving magnetic levitation, and drive forces for producing the needed pump torque. The generation of these forces requires bearing and drive windings, which can be realized as separate bearing and drive coils or as identical, combined coils on the stator claws. In this paper, a detailed comparison between these two winding concepts is undertaken, whereby the copper losses, the power electronics losses, and the achievable pump output pressure are evaluated for both concepts. For each criterion a ratio of improvement is calculated analytically which allows evaluation of the performance of the two winding concepts for any given pump operating point and design. Finally, also practical features such as control complexity, cabling effort and manufacturability are discussed and measurements on prototype systems are carried out to validate the considerations.

• 한국화재소방학회논문지
• /
• 제30권4호
• /
• pp.82-87
• /
• 2016

초고층 건물의 환기계획에서 설비의 효율적인 운영을 위해 환기설비는 제연설비 겸용으로 사용되고 있다. 본 연구에서는 지하 4층 지상 59층의 초고층 건물을 분석모델로 선정하고 수치해석을 통해 연기이동력에 의한 층별 압력분포를 검토하였으며, 분석모델 건물에서의 연기이동력이 환기 및 제연에 미치는 영향을 규명하였다. 또한 이들 결과를 바탕으로 분석모델 건물의 환기계획에서 주방용 환기댐퍼를 환기-제연 겸용으로 설계할 때 연기이동의 복합력과 요구되는 댐퍼의 개폐력과의 관계를 운동해석 시뮬레이션을 통해 결정하였고, 그 결과로부터 적합한 댐퍼의 구동장치를 선정하였다.

• 동력기계공학회지
• /
• 제12권2호
• /
• pp.55-61
• /
• 2008

This paper discusses the advantages of using Fourier-based periodic excitation and of combining internal and external models in dynamic robot parameter identification. Internal models relate the joint torques or forces with the motion of the robot; external models relate the reaction forces and torques on the bedplate with the motion data. This combined model allows to combine joint torque/force and reaction torque/force measurements in one parameter estimation scheme. This combined model estimation will yield more accurate parameter estimates, and consequently better predictions of actuator torque, which is shown by means of a simulated experiment on a CRS A465 industrial robot.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1998년도 추계학술대회 학술발표 논문집
• /
• pp.403-410
• /
• 1998

An immune system has powerful abilities such as memory recognition and learning how to respond to invading antigens, and has been applied to many engineering algorithms in recent year. In this paper, the combined optimization algorithm (Immune-Genetic Algorithm: IGA) is proposed for multi-optimization problems by introduction the capability of the immune system that controls the proliferation of clones to the genetic algorithm. The new combined algorithm is applied to minimize the total weight of the rotor shaft and the transmitted forces at the bearings in order to demonstrate the merit of the combined algorithm. The inner diameter of the shaft and the bearing stiffness are chosen as the design variables. the results show that the combined algorithm can reduce both the weight of the shaft and the transmitted forces at the bearing with dynamic constraints.

• Composites Research
• /
• 제12권2호
• /
• pp.46-52
• /
• 1999

본 연구는 면내 전단과 휨을 동시에 받는 직교이방성 구조재의 복부판의 탄성좌굴거동에 대한 해석적 연구결과이다. 펄트루젼 방법으로 생산된 섬유보강 플래스틱을 직교이방성으로 간주하였다. 복부판의 좌굴해석에서 직교이방성 재료의 역학적 성질을 고려할 수 있도록 기존의 등방성 판의 좌굴해석을 위해 개발된 이론적 해를 확장하였다. 이론식의 해를 구하는 방법으로 Rayleigh-Ritz법을 사용하였으며, 면내 전단과 휨을 동시에 받는 복부판의 탄성좌굴강도를 구할 수 있는 그래프를 제시하였다. 전단과 휨의 상호작용과 관련된 설계기준에 대해서도 도한 검토하였다.

• Journal of Biosystems Engineering
• /
• 제21권1호
• /
• pp.52-59
• /
• 1996

In this study, the combined forces of electro-osmosis and compression were applied to cabbage dewatering and their effects were discussed. Nine treatments of combined forces consisting of three levels of voltage and compression were applied to chopped and macerated chinese cabbage placed in the experimental set-up consisted of cylinder-piston. The results showed that as both voltage and pressure increased the dewatering rates increased and the combined force of voltage and compression was a very effective means in the dewatering of chinese cabbage in which the largest dewatering rate difference, 72%, was found between the combined force of 30V with 68.2kPa and no voltage(0V) with 68.2kPa. However, no significant difference was found between the voltage of 0 and 10volts in 9.75kPa and the pressure of 68.2kP and 126.7kPa in 30volts. The maximum and minimum dewatering rate were 82% in the combined force of 30 volts of 126.7kPa and 8% in 0 volt of 9.75kPa, respectively. Within the experimental trials, it appeared that the best treatment combination would be pressure of 68.2kPa and voltage of 30V producing dewatering rate of 80ft in which the produced liquid contained about 1% solid. Employing this dewatering method as a pretreatment before drying process can contribute in considerable energy saving in agricultural wastes treatment.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 A
• /
• pp.62-64
• /
• 1995

This paper describes the characteristics of electromagnetic forces of Combined superconducting maglev system. Generation of the levitation, the propulsion and the guidance force by a single coil is proved by the phasor- analysis. It is also shown that double-layered configuration has better characteristics in efficiency, pulsation of the forces and drag ratio than single-layered configuration.

• Tribology and Lubricants
• /
• 제17권1호
• /
• pp.56-63
• /
• 2001

The dynamic behavior of rotor-bearing system used in swash plate compressor has been investigated using the combined methodologies of finite elements and transfer matrices. The finite element is formulated including the field element for a shaft section and the point element for swash plate, disk pulley and bearings. The Houbolt method is used to consider the time march for the integration of the system equations. The transient whirl response of rotating shaft supported on roller bearings is obtained, considering compression forces and unbalance forces at swash plate and driving pulley. And, the steady state displacements of the rotor are compared with a variation in unbalance mass. Results show that the loci of rotating shaft considering unbalance forces and external compression forces are more severe in flutter motion than with only unbalance forces.