• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.4
• /
• pp.635-642
• /
• 2013

We have prepared a DEMO conveyor device for conveying a large 8G class glass sheet using ahorizontal air-cushion system. This device consists of the body frame and the driving frame that are combined to realize a frame for conveying glass without any contact.The driving frame comprises an air flotation table (bed), drive roller supported at both ends, and ASU. Part of the ASU serves to control the airflow as the chamber consists of a porous pad and fan. Fiber filters replace the porous pad and axial fans serve as an air compressor. In addition, to determine the appropriate glass levitation from the air table, this study examined the design specifications of the applied filter (discharge speed of HEPA and ULPA filters, and flow rate) as well as the height of the and the proper supporting roller height (14mm). Then, after adjusting the position of the ASU and the number of ASUs required to configure the UNIT air floating C/V, we analyzed the height and flatness of the glass and derived the appropriate layout (1140-mm distance between ASUs).

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.50 no.12
• /
• pp.615-623
• /
• 2001

In this paper, we study a series active power filter to compensate current harmonics and unbalanced source voltages. Conventional control methods for compensating unbalanced source voltages use source voltages to calculate compensation voltages, and in addition use load voltages to regulate load voltages. But the proposed control method uses load voltage to compensate unbalanced source voltages and regulate load voltages. And we propose a control method to reduce current harmonics which can calculate compensation voltages directly from source currents and load voltages. By well-matched operation of two control methods, the series active power filter can compensate current harmonics, unbalanced source voltages, and regulate load voltages. We compose a combined system of the series active power filter and parallel passive filters to confirm a validity of proposed control methods. The results from experiments are presented to demonstrate effectiveness of the proposed method.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.5
• /
• pp.939-946
• /
• 2012

Recently privacy breaches has been an social issues. If we should encrypt the sensitive information in order to protect the database, the leakage of the personal sensitive data will be reduced for sure. In this paper, we analyzed the existing protection algorithms to protect the personal sensitive data and proposed the combined method using the bucket index method and the bloom filters. Bucket index method applied on tuples data encryption method is the most widely used algorithm. But this method has the disadvantages of the data exposure because of the bucket index value presented. So we proposed the combined data encryption method using bucket index and the bloom filter. Features of the proposed scheme are the improved search performance of data as well as the protection of the data exposure.

• Tribology and Lubricants
• /
• v.38 no.4
• /
• pp.121-127
• /
• 2022

This study presents the development of an integrated oil purification system consisting of moisture removal, oil flushing, and oil filtering devices. In this system, the oil flushing device is combined with a micro-bubble generator. Oil purification is necessary for ensuring the high performance of the lubricant through the efficient removal of contaminants and thus enables good maintenance of mechanical systems. The developed purification system removes moisture, varnish, and solid particles. Moreover, during oil purification, the oil flushing device separates foreign materials and contaminants remaining in the lubricating oil piping or mechanical systems. The microbubble generator, which is combined with the oil flushing device, can separate harmful contaminants, such as sludge, wear particles, and rust, from piping or lubrication systems through the cavitation effect. Moisture is removed using a double high-vacuum chamber, while sludge and varnish are removed via electro-absorption using a high-voltage generator. Additionally, the total maintenance cost of the system is reduced through the use of domestically fabricated cartridge filters composed of glass fiber and cellulose. The heater, which maintains the temperature of the lubricant at 60℃, can process 41,000 L of lubricant simultaneously. Multiple tests confirmed that the proposed integrated purification system exhibits good performance in oil flushing and removal of water and varnish.

• Proceedings of the IEEK Conference
• /
• 2002.07a
• /
• pp.90-93
• /
• 2002

In this work, an efficient lifting implementation of invertible deinterlacing is proposed. The invertible deinterlacing is a technique developed for intra-frame-based video coding as a preprocessing. Unlike the conventional deinterlacing, it preserves the sampling density and has the invertibility. For a special selection of filters, it is shown that the deinterlacing can be implemented efficiently by an in-place computation. It is also shown that the deinterlacing can be combined with the lifting discrete wavelet transform (BWT) employed in JPEG2000. A bit modification of the original lifting DWT is shown to provide the simultaneous implementation of deinterlacing. This fact makes the proposed technique attractive for the application to Motion-JPEG2000. The inverse transform and the reversible lifting implementation are also discussed.

• Proceedings of the KIPE Conference
• /
• 2001.10a
• /
• pp.571-575
• /
• 2001

A protection scheme for hybrid active power filters, which is combined shunt passive filter and small rated series active filter, is presented and analyzed in this paper. The proposed series active power filter operated as a high impedance 'k($\Omega$)' to the fundamental component when over current occurs in the power distribution system, and three control strategies are proposed in this paper. The first is the method by detecting the fundamental source current through the p-q theory, the second is the method by detecting the fundamental component of load current in Synchronous Reference Frame (SRF) and the third is the method by detecting the input voltage. When the over current occurs in the power distribution system, the proposed scheme protects the series active power filter without additional protection circuits. The validity of proposed protection scheme is investigated through experimental result for the prototype hybrid active power filter system.

• Publications of The Korean Astronomical Society
• /
• v.10 no.1
• /
• pp.1-14
• /
• 1995

We observed impact spots on Jupiter which were formed by the collision with fragments of Shoemaker-Levy 9 comet during the period from 17 July to 13 August, by using the SNU 61cm reflector combined with CCD camera and DBVRI filters. In order to get more clear image of impact spots, the observed data were processed by the unsharp masking method, high-pass filtering method and Richardson-Lucy algorithm after the basic processing through IRAF package. The sizes of impact spots range from 2000km to 1000km, and from this size, the original size of comet fragments before collision with Jupiter is estimated to be less than ${\sim}3km$. From the observed rotating rate of impact spots, the rotational period of Jupiter is determined as $9^h$ $56^m$ $32^s$ at the southern latitude of $47^{\circ}{\sim}49^{\circ}$.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.6
• /
• pp.1-9
• /
• 1995

The structures of inductive irises are used commonly in waveguide filter, especially at highter frequencyies, due to low loss and high temperature stability. However, the iris thickness can not be neglected, as it could be at the lower frequencies. Approximate models assuming zero thickness fail to predict the exact behavior of the filter. And current thickness correction is introduced which is valid in the case of thick irises only. Account of the effect of round is normally not taken. So the necessity of finding a relation for the two factors-iris thickness and round-arises in the design of waveguide filters. This paper describes a mutual relation that considers the combined effect of finite thickness and round from the start. In order to test the validity of the changed relation, weveral examples are given. And the measured response of each case is then compared with the predicted reponse. And it is shown that the radius is of perceptible influence on the transmission coefficient through a thick iris.

• International Journal of Control, Automation, and Systems
• /
• v.1 no.4
• /
• pp.444-452
• /
• 2003

An integration system with multi-measurement sets can be realized via combined application of a centralized and federated Kalman filter. It is difficult for the centralized Kalman filter to remove a failed sensor in comparison with the federated Kalman filter. All varieties of Kalman filters monitor innovation sequence (residual) for detection and isolation of a failed sensor. The innovation sequence, which is selected as an indicator of real time estimation error plays an important role in adaptive mechanism design. In this study, the centralized Kalman filter with adaptive measurement fusion is introduced by means of innovation sequence. The objectives of adaptive measurement fusion are automatic isolation and recovery of some sensor failures as well as inherent monitoring capability. The proposed adaptive filter is applied to the GPS/SDINS integration system with an additional sensor. Simulation studies attest that the proposed adaptive scheme is effective for isolation and recovery of immediate sensor failures.

• Proceedings of the KIEE Conference
• /
• 2002.04a
• /
• pp.225-227
• /
• 2002

In this paper, novel concept of a photovoltaic(PV) power generation system adding the function of active filter(AF) is proposed. Even PV power generation system can be treated to a harmonics source for the power distribution system, it is necessary that the function of AF system in grid connected PV power generation system. Active Filters intended for harmonic solutions are expending their functions from harmonic compensation of nonlinear loads into harmonic isolation between utilities and consumer, and harmonic damping throughout power distribution system. So, the PV system combined the function of AF system can be usefully applied in power distribution system. Here, the control strategy of PV-AF system is introduced.