• 한국지반신소재학회논문집
• /
• 제19권3호
• /
• pp.9-21
• /
• 2020

본 연구에서는 사질토와 점성토가 혼재하는 해안 매립지반에서 조합형 Sheet Pile 공법의 설계법을 고찰하였고 지반 굴착시의 거동을 해석하였다. 조합형 Sheet Pile 공법의 형태(Built up, Interlocking, Welding) 및 해석방법(엄지말뚝법, 연속벽법)에 따라 흙막이 가시설의 예측 거동이 상이함을 탄소성 해석으로부터 확인하였다. Sheet Pile(측면말뚝) 부재력의 경우 연속벽체 해석법의 결과가 가장 보수적인 결과를 예측하였다. 조합형 Sheet Pile 공법의 최대 부재력을 토대로 각 부재별 응력비(발생/허용)를 분석하면 측면말뚝의 경우 휨, 버팀보의 경우 조합응력에서 최대값을 나타내었다. 유한요소해석결과 측면말뚝의 부재력은 단기 유효응력 해석 조건에서 가장 크게 나타난 반면, 버팀보의 압축력은 압밀 해석에서 크게 나타났다. 탄소성 해석과 유한요소해석 결과를 비교하면, 측면말뚝의 전단력과 버팀보의 축력은 탄소성 해석에서 크게 평가되었고, 측면말뚝의 휨은 유한요소해석의 단기 유효응력 조건에서 가장 큰 것으로 나타났다. 또한, 측면말뚝의 변위는 탄소성 해석보다는 유한요소해석에서 더 크게 예측되었다.

• 한국농공학회지
• /
• 제30권2호
• /
• pp.67-81
• /
• 1988

The purpose of the present study is to set up an efficient optimum design method for the large-scale reinforced concrete cylindrical shell structures like intake tower of reservoir and to establish a solid foundation for the automatic optimum structural design combined with finite element analysis. The major design variables are the dimensions and steel areas of each member of the structures. The construction cost which is composed of the concrete, steel, and form work costs, respectively, is taken as the objective function. The constraint equations for the design of intake-tower are derived on the basis of the working stress design method. The corresponding design guides including the standard specification for concrete structures have been also employed in deraving the constraint conditions. The present nonlinear optimization problem is solved by SUMT method. The reinforced concrete intake-tower is decomposed into three major substructures. The optimization is then conducted for both the whole structure and the substructures. The following conclusions can be drawn from the present study. 1. The basis of automatic optimum design of reinforced concrete cylindrical shell structures which is combined with finite element analysis was established. 2. The efficient optimization algorithms which can execute the automatic optimum desigh of reinforced concrete intake-tower based on the working stress design method were developed. 3. Since the objective function and design variables were converged to their optimum values within the first or second iteration, the optImization algorithms developed in this study seem to be efficient and stable. 4. The difference in construction cost between the optimum designs with the substructures and with the entire structure was found to be small and thus the optimum design with the substructures,rnay conveniently be used in practical design. 5. The major active constraints of each structural member were found to be the tensile stress insteel for salb, the minimum lonitudinal steel ratio constraints for tower body and the shearing stress in concrete, tensile stress in steel and maximum eccentricityconstraints for footing, respectively. 6. The computer program develope in the present study can be effectively used even by an unexperienced designer for the optimum design of reinforced concrete intake-tower.

• Journal of Welding and Joining
• /
• 제12권3호
• /
• pp.90-100
• /
• 1994

In this study the fatigue crack growth behavior was investigated for the surface cracks in aluminum alloy A5083-O plate and its weldment. Several kinds of specimens were tested at room temperature. The Eccentric specimens(E1.0, E2.5) subjected to combined stresses(tension+bending) were tested and the welded specimens with weld toes(TOE1, TOE2) were tested in order to verify the method to consider the stress concentration such as weld toe. It was ascertained that the surface crack growth property in the weld toe could be predicted by the corrected Pang's equation proposed in this study.

• 한국안전학회지
• /
• 제32권3호
• /
• pp.60-65
• /
• 2017

This study examined the effect of rotational stiffness of joints between vertical and horizontal members in system supports. In order to prevent repeated disasters of system supports, it is important to examine the accurate behavior of system supports. Among various factors affecting the complex behavior of system supports, this study focused on the stiffness of joints between vertical and horizontal members. The considered joint was modelled by a rotational spring, but the translational displacements were fixed. The stiffness of rotational spring was calculated by utilizing the usable experimental data. In addition, the hinge connection condition, which is generally considered in design and only restrict the translational displacements, was modelled to compare the results. The case with the rotational stiffness in joints showed 3.5 times buckling loads compared to the case without the rotational stiffness. Thus, the structural behavior of the vertical member in system supports was similar to the vertical member with the fixed condition. For the combined stresses of vertical members, the combined stress ratios were reduced 5~6% by considering the rotational stiffness of connecting parts. However, for the horizontal member where showed relatively small stress range, the stresses were increased 2.3~7.6 times by considering the rotational stiffness in connecting parts.

• 한국발생생물학회지:발생과생식
• /
• 제23권1호
• /
• pp.11-19
• /
• 2019

The study was conducted to investigate the effects of alpha-linolenic acid (ALA) combined with bovine serum albumin (BSA) or methyl-beta-cyclodextrin (MBCD) on plasma and acrosomal membrane damages, mitochondrial activity, morphological abnormality, motility, and oxidative stress in frozen-thawed boar sperm. In previous our study, 3 ng/mL ALA had been shown protective effect during freezing process of boar sperm. Therefore, we used 3 ng/mL ALA in present study and ALA was combined with same molar ratio of BSA or MBCD (ALA+BSA and ALA+MBCD, respectively). To confirm the effect of two carrier proteins, same volume of BSA and MBCD without ALA were added during cryopreservation. Membrane damage, mitochondrial activity, reactive oxygen species (ROS) and lipid peroxidation (LPO) levels were measured using flow cytometry, and movement of sperm tail as motility parameter and morphological abnormality were observed under light microscope. In results, all of sperm parameters were enhanced by ALA combined with BSA or MBCD compared to control groups (p<0.05). Mitochondrial activity, morphological abnormality, ROS and LPO levels in ALA+BSA or MBCD groups were no significant difference compared with ALA, BSA and MBCD treatment groups. On the other hand, plasma and acrosomal membrane intact, and sperm motility in ALA+MBCD group were higher than single treatment groups (p<0.05), whereas ALA+BSA did not differ. Our findings indicate that carrier proteins such as BSA and MBCD could improve the effect of ALA during cryopreservation of boar sperm, and treatment of ALA with carrier proteins enhance membrane integrity, mitochondrial activity through reduction of ROS-induced LPO.

• 한국안전학회지
• /
• 제30권5호
• /
• pp.37-43
• /
• 2015

This study examined the effects of the minimum horizontal load on the structural behaviors and safety of system supports. The minimum horizontal load was frequently ignored in the design of system supports even though the level of that load was specified in the code and guide in Korea such as 'Standard Specification in Temporary Construction' and 'Guide to Installation of Shores for a Concrete Bridge'. To examine the effects of considering the minimum horizontal load, the finite element analysis were performed for various system supports. By varying installing parameters of system supports such as the vertical member spacing, the installation height, and the thickness of slab, the maximum combined stress ratios were estimated to investigate the structural safety of system supports. The results showed similar axial stress in vertical members but an increase in bending stress with a consideration of the horizontal load. The combines stress ratios are remarkably increased due to the consideration of the horizontal load. Consequently, the system supports, which were initially estimated to be safe when only the vertical loads were considered, were changed to be unsafe in most cases by the effects of the both the vertical and horizontal stresses. Therefore, the minimum horizontal load following the code and the guide is an essential load that could control the structural safety of system supports.

• Asian-Australasian Journal of Animal Sciences
• /
• 제18권4호
• /
• pp.545-551
• /
• 2005

A feeding trial was conducted to determine whether dietary vitamin C (200 mg/kg) and vitamin E (250 mg/kg) prevent any drops in egg shell quality under heat stress in broiler breeder hens. One hundred and sixty molted Ross broiler breeders were housed randomly in an individual cage at 83 weeks of age. Four dietary treatments with forty hens and four replications per treatment were control (no additional vitamins), vitamin C-, or vitamin E-supplemented and combined supplementation of the two vitamins. After a tenday-adaptation period at 25$^{\circ}C$, the ambient temperature was kept at 32$^{\circ}C$ for a three-week-testing period. Egg production dropped dramatically over week but it did not show a significant change among treatments (p<0.05). However, egg quality parameters such as egg weight, specific gravity, shell thickness, SWUSA, puncture force and shell breaking strength from the birds fed the diet with the combined vitamins C and E were significantly improved over those of the control group during the heat stress period (p<0.05). The hens fed the vitamin C diet improved tibia breaking strength (37.16 kg), statistically higher than the birds fed the control and the vitamin E diets (p<0.05). The hens fed the control diet showed higher serum corticosterone levels, a mean of 5.97 ng/ml, than those of the other treatments (p<0.05). The heat stress resulted in elevated heterophils and decreased lymphocytes in serum, increasing the H/L ratios for all the treatments. However, the increases in H/L ratios were alleviated by feeding the diets containing vitamin C alone or together with vitamin E, although there were no significant differences in the ratio between the two groups (p<0.05). In conclusion, vitamins C (200 mg/kg) and/or E (250 mg/kg) supplemented to the diets for broiler breeder hens could prevent drops in egg shell quality and tibia bone strength under highly stressful environmental temperatures.

• Structural Engineering and Mechanics
• /
• 제47권1호
• /
• pp.59-73
• /
• 2013

The Xiaolan channel super large bridge is unique in style and with greatest span in the world with a total length of 7686.57 m. The main bridge with spans arranged as 100m+220m+100m is a combined structure composed of prestressed concrete V-shape rigid frame and concrete-filled steel tubular flexible arch. First of all, the author compiles APDL command flow program by using the unit birth-death technique and establishes simulation calculation model in the whole construction process. The creep characteristics of concrete are also taken into account. The force ratio of the suspender, arch and beam is discussed. The authors conduct studies on the three-plate webs's rule of shear stress distribution, the box girder's longitudinal bending normal stress on every construction stage, meanwhile the distribution law of longitudinal bending normal stress and transverse bending normal stress of completed bridge's box girder. Results show that, as a new combined bridge, it is featured by: Girder and arch resist forces together; Moment effects of the structure are mainly presented as compressed arch and tensioned girder; The bridge type brings the girder and arch on resisting forces into full play; Great in vertical stiffness and slender in appearance.

• Advances in concrete construction
• /
• 제10권6호
• /
• pp.559-571
• /
• 2020

This study aimed to inspect the axial compression mechanical performance of basalt-fiber-reinforced recycled - concrete (BFRRC)-filled square steel tubular stub column. The replacement ratio of recycled coarse aggregate (RCA) and the basalt fiber (BF) dosage were used as variation parameters, and the axial compression performance tests of 15 BFRRC-filled square steel tubular stub column specimens were conducted. The failure mode and the load-displacement/strain curve of the specimen were measured. The working process of the BFRRC-filled square steel tubular stub column was divided into three stages, namely, elastic-elastoplasticity, sudden drawdown, and plasticity. The influence of the design parameters on the peak bearing capacity, energy dissipation performance, and other axial compression performance indexes was discussed. A mathematical model of segmental stiffness degradation was proposed on the basis of the degradation law of combined secant-stiffness under axial compression. The full-process curve equation of axial compressive stress-strain was proposed by introducing the influencing factors, including the RCA replacement ratio and the BF dosage, and the calculated curve agreed well with the test-measured curve.

• 한국강구조학회 논문집
• /
• 제17권4호통권77호
• /
• pp.419-429
• /
• 2005

본 연구의 목적은 기존의 복합십자형 다이아프램을 사용한 CFT 기둥-보 인장측 접합부에 관한 연구에 이어서 접합부 각 요소의 구조적 특성을 명료하게 하는데 있다. 복합십자형 다이아프램은 기존 접합부의 하중전달 경로 및 다이아프램의 갑작스런 기하학적인 형상 변화에 대한 디테일을 개선함으로서, 보 플랜지 및 다이아프램에 응력을 고르게 분포시키고 접합부의 응력집중이 완화된 접합방식이다. 복합십자형 다이아프램을 접합부에서 중요한 요소 중 하나인 슬리브에서의 응력전달에 관하여 연구를 수행하였다. 슬리브의 두께 및 길이를 변수로 하여 해석한 결과, 슬리브의 길이 및 두께는 접합부의 내력에 큰 영향을 주지 않고 다이아프램으로부터의 하중을 콘크리트로 전달시키는 매개체의 역할을 하였다. 또한 적정 슬리브의 길이 및 두께를 각각 직경의 1배, 슬리브 직경/두께비를 20으로 제안한다. 기존의 내력식을 검토하여 메커니즘을 수정한 후 적용가능한 접합부의 극한내력식 및 항복내력식을 제안하였다.