• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.68 no.1
• /
• pp.8-12
• /
• 2019

Combined Cycle Unit(CC) generates the primary power from the Gas Turbine(GT) and supplies the remaining heat of the GT to the Steam Turbine(ST) to generate the secondary power from the ST. It plays a major role in terms of energy efficiency and Load Frequency Control(LFC). Incremental Heat Rate(IHR) curves of economic dispatch(ED) of CC is applied differently by GT/ST combination. But It is practically difficult because of performance test by all combinations. This paper suggests a reasonable method for estimating IHR curves for partial combinations(1:1~(N-1):1) using IHR curves when operating with GT alone(1:0) and with all(N:1) combinations of CC.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.10 no.5
• /
• pp.71-77
• /
• 2001

On-machine measuring system of Numerically Control(NC) machines permit computer control of basic material cutting processes of moulds. A part of mould designed within a CAD/CAM system can be manufactured by generation of tool paths by the measuring systems. Since the three-dimensional geometry by AutoCAD of the part is contained in the data base, the manufacturing specialist combined with the appropriate software simulation, can not only create the commands to drive the virtual measuring and standardization of measuring modules but also can check for mistakes by viewing the computer graphics simulation of the tool cutting sequence.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.2
• /
• pp.327-334
• /
• 2020

In this paper, an automatic cruise system of unmanned boat was developed for surveying water depth in reservoir using accurate location information. Using global satellite navigation system(GNSS) data in real time, this unmanned system, combined with an echo sounder, can simultaneously collect location information and depth information on the reservoir. This automatic navigation system allows the automatic route generation program to automatically generate a cruise route according to the input conditions for grid sizes of 5m, 10m and 20m, and automatically controls the cruise route with high positional accuracy. The developed system was tested to verify the applicability of the selected Yonggok(Geoncheon) reservoir as a test reservoir located in Suncheon, Jeollanam-do.

• Journal of Animal Environmental Science
• /
• v.6 no.2
• /
• pp.113-119
• /
• 2000

A Robotic milking cluster system with the manipulator for an automatic milking system was designed and built for farmer to work easily and comfortably during milking processing. The cluster system was composed of screws, cams and links for power transmission, DC motors, the Quick Basic one-chip microprocessor, the vision system for image processing, and tea-cups. Software, written in Visual C+ and Quick Basic, combined the function of image capture, image processing, milking cluster control, and control into one control. The unit was made to transfer from four fixed points to four teats with four teat-cups. Performance tests of the cluster unit, the fully integrated system, were conducted to attach and detach the teat-cup on the teat of a artificial cow. The transfer programming provided for a teat-cup milking loop during the system starts and comes back the original fixed point at the manipulator of it for milking. It transferred the teat-cup with a success rate of more than 70%. The average time it took ot perform the milking loop was about 20 seconds.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2015.10a
• /
• pp.1506-1508
• /
• 2015

A 2D barcode region localization system for the automatic inspection of a long distance logistics objects has been developed. For the successful 2D barcode localization, variance and frequency of the pixel distribution within average 2D barcodes is modeled and the average model of 2D barcode is combined with the corner features detection to localize the final 2D barcode candidates. An automatic 2D barcode localization software was developed with the multiple features mixture method and we tested our system on real camera images of several popular 2D barcode symbologies.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.326-329
• /
• 2004

In this paper, we show a new form of blood pressure controller combined PI control with $H_{\infty}$ loop-shaping. Hypertensive patients or post-operative patients need to maintain normally blood pressure. Exact regulation of blood pressure is needed for maintaining variable blood pressure of preventing complications. The regulation of blood pressure is achieved by injecting drugs, and usually sodium nitroprusside is used as those kinds of drugs. It is necessary to control the infusion rate sodium-nitroprusside carefully to achieve the desired blood pressure. It has been known that regulation of blood pressure by automatic controller is more effective than regulation of blood pressure by human operators. The control of blood pressure has many constraints and uncertainties. Most of biological system has the time-varying variables and the side effects such as increased risk of sepsis and organ failure. To solve such a problem, we design a new robust PI controller using $H_{\infty}$ loop-shaping to decrease noise effects that come out from human body and errors for time delay. The system with designed controller shows more stable control of mean blood pressure and more robust performance for uncertainties. Validation methods for the control performance are confirmed to computer simulations.

• Journal of Advanced Marine Engineering and Technology
• /
• v.25 no.3
• /
• pp.623-630
• /
• 2001

The conventional control techniques based a mathematical model are not well suited for dealing with ill-defined and uncertain system like a linear quadratic control. Recently, fuzzy control has been successfully applied to a wide variety of practical problems such as robot, water purification, automatic train operation system etc. In this paper, a design technique of robust Fuzzy-LQ controller for each subsystem is designed. Secondly , all the subsystem controllers are combined by fuzzy weighted averaging method. Finally the effectiveness of the proposed controller is verified through a series of computer simulations for an inverted pole system.

• Proceedings of the CALSEC Conference
• /
• 2005.03a
• /
• pp.55-61
• /
• 2005

We will introduce a new web-based knowledge management system in progress, in which XML-based web information extraction and our structuring knowledge technologies are combined using ontology-based natural language processing. Our aim is to provide efficient access to heterogeneous information on the web, enabling users to use a wide range of textual and non textual resources, such as newspapers and databases, effortlessly to accelerate knowledge acquisition from such knowledge sources. In order to achieve the efficient knowledge management, we propose at first an XML-based Web information extraction which contains a sophisticated control language to extract data from Web pages. With using standard XML Technologies in the system, our approach can make extracting information easy because of a) detaching rules from processing, b) restricting target for processing, c) Interactive operations for developing extracting rules. Then we propose a structuring knowledge system which includes, 1) automatic term recognition, 2) domain oriented automatic term clustering, 3) similarity-based document retrieval, 4) real-time document clustering, and 5) visualization. The system supports integrating different types of databases (textual and non textual) and retrieving different types of information simultaneously. Through further explanation to the specification and the implementation technique of the system, we will demonstrate how the system can accelerate knowledge acquisition on the Web even for novice users of the field.

• Tribology and Lubricants
• /
• v.19 no.6
• /
• pp.335-341
• /
• 2003

Recently, the automotive industry is being developed rapidly. On this, a demand of high quality performance­test­machine is increased too. But it is progressive technology that must be combined hydraulic, mechanic and electronic technologies. To construct this system, the design of oil hydraulic circuit, interface skill between sensor and personal computer, data acquisition & display system and integrated control are very important skill. Moreover, reliable data is obtained with vacuum system and complex heat exchange system. Therefore, in this study, we designed a performance­test­machine by using above key technologies and we also made a integrated PC control system using personal computer which is more progressive and flexible method than PLC control.

• ETRI Journal
• /
• v.25 no.6
• /
• pp.531-534
• /
• 2003

This report describes the effect of optical delay on the suppression of the power transient excursion in a combined gain-controlled erbium-doped fiber amplifier with an internal optical feedback loop (OFL). A simple homogeneous model showed that the optical delay caused a phase change in the oscillation of the surviving and laser channels, which resulted in a reduction of the overall power transient excursion. In addition to the reduction, a real system with a 1528.7-nm OFL shifted the oscillation upward or downward according to channel removal or addition, whereas another one with a 1560.9-nm OFL did not. This different transient behavior reflected a control-wavelength dependence on optical automatic gain control, where spectral-hole burning dominated over relaxation oscillation for 1528.7 nm, and vice versa for 1560.9 nm.