• 대한기계학회논문집
• /
• 제12권3호
• /
• pp.520-527
• /
• 1988

본 연구에서는 액체용 이젝터의 성능을 결정하는 여러가지 제약인자중 특히 레이놀즈수 변화에 따른 구동노즐의 면적비 및 목부길이가 액체용 이제터성능에 미치 는 영향을 체계적인 실험을 통하여 연구함으로써 기 개발된 CAD용 전산프로그램의 타 당성을 보다 세밀히 검토하고 이에 보완을 가하는데 연구의 목적이 있다.

• 상하수도학회지
• /
• 제26권4호
• /
• pp.591-598
• /
• 2012

Denitrification is an important biological mechanism in wastewater treatment process because this process is technically to remove nitrogen from water to air. There have been lots of study about denitrification engineering and molecular biological research about denitrifying bacteria, respectively. However, combination of these researches was unusual and rare. This study is about the correlation between quantity of denitrifying bacteria and denitrification potential, and consists of NUR batch test as analysis method of denitrification potential and quantitative molecular analysis for denitrifying bacteria. Three reactors (A/O, MLE and A/O of nitrogen deficiency) are operated to get activated sludge with various denitrification potential. All samples which were acquired from reactors were measured denitrification potential by NUR test and NUiR test. Also, Real-time PCR was conducted for quantification of denitrifying bacteria composition in activated sludge. The various denitrification potentials were measured in the reactors. The denitrifiaction potential was the highest in MLE process and the reactor of the nitrogen deficiency showed the lowest. Genomic DNA of activated sludge was obtained and consequently, real-time PCRuse the primer sets of nirK and nirS　were conducted to quantify genes involving denitrification reductase production. As the result of real-time PCR, nirK gene showed more significant influence on denitrification potential comapred with nirS gene.

• 한국환경보건학회지
• /
• 제37권4호
• /
• pp.315-322
• /
• 2011

Objectives: Organic matter and nitrogen were removed using the EGSB process, a high-rate anaerobic process, in combination with a nitritation-denitritation process, in order to ensure the stable treatment of seafood processing wastewater. Methods: The upflow velocity of an EGGS reactor was operated at 10 m/hr for maximal organics removal efficiency. For removal of nitrogen from seafood processing wastewater a nitritation-denitriation process was applied Results: The efficiency of the EGSB process showed that it has an 80% or more organic matter (CODcr) removal efficiency with an HRT of six hours or more at influent loadings of 17.34 kgCOD/$m^3$/day or less. The methane product for TCODcr removal was 0.23-0.38 $m^3CH_4$/kgCODrem., which was similar to the theoretical generation of STP-state methane, 0.35 $m^3CH_4$/kgTCODrem. In the nitritation-denitritation process, the nitritation conversion rate to $NH_4^+$-N concentration was 82% to 87%, 72% to 81% and 64% to 69% when HRT was 24 hr, 21 hr and 18 hr, respectively. In the denitritation process, the ratio of SCOD consumption to NOx-N removal ranged from 2.347 to 2.587. It was 2.472 on average. Conclusions: The optimal HRT for stable processing of seafood processing wastewater is six hours or more. The ratio of nitrite to total NOx-N was 82% to 96%, which indicates that nitrite accounts for the largest portion of the product.

• 공업화학
• /
• 제3권4호
• /
• pp.649-656
• /
• 1992

t-Butyl hydroperoxide(TBHP)에 의한 염화알릴의 에폭시화에 의해서 에피클로로히드린을 합성하는데 실리카에 담지된 몰리브데늄 촉매를 사용하였다. 속도론적 연구는 회분 반응기를 사용하여 $60-80^{\circ}C$, 10기압에서 TBHP/염화알릴의 농도비를 0.01-0.1의 범위내에서 수행하였다. t-butyl alcohol(TBA)에 의해서 염화알릴의 에폭시화 반응이 억제되었고, 반응속도는 Michaelis-Menten 형태의 속도식으로 표현할 수 있었다. 반응기구는 TBHP와 TBA의 가역흡착과 $Mo/SiO_2$에 흡착된 TBHP와 염화알릴의 표면반응으로 설명할 수 있었다.

• 한국물환경학회지
• /
• 제33권6호
• /
• pp.736-743
• /
• 2017

In this study, 4-nonylphenol (4-NP), an endocrine disrupting chemical, was removed by ozone treatment processes under the various experimental conditions including UV irradiation, $TiO_2$ addition. The ozone flow rate and concentration were maintained at $1.0L{\cdot}min^{-1}$ and $70{\pm}5mg{\cdot}L^{-1}$. The pH, COD and TOC of the samples were obtained every 10 minutes for 60 minutes in laboratory scale batch reactor. We found that the combination of UV irradiation and $TiO_2$ addition for ozonation improves the removal efficiency of COD and TOC in 4-NP aqueous solution. In case of the $O_3/UV/TiO_2$ system, COD and TOC were greatly reduced to 85.3 ~ 94.0% and 89.2 ~ 97.2%, respectively. 4-NP degradation rate constants, $k_{COD}$ and $k_{TOC}$, were calculated based on the COD and TOC values. Significantly, $k_{COD}$ and $k_{TOC}$ were improved in the $O_3/UV/TiO_2$ treatment process compared with single $O_3$ process, because the oxidation and the mineralization of 4-NP were increased by generating of the hydroxyl radical. The $k_{COD}$ and $k_{TOC}$ were obtained to be $5.81{\times}10^{-4}{\sim}10.8{\times}10^{-4}sec^{-1}$ and $11.9{\times}10^{-4}{\sim}19.4{\times}10^{-4}sec^{-1}$ in the $O_3/UV/TiO_2$ process. Activation energy ($E_a$) of ozone oxidation reaction based on $k_{COD}$ and $k_{TOC}$ were increased in order of $O_3/UV/TiO_2$ < $O3/UV$ < $O_3/TiO_2$ < $O_3$ process. It was confirmed that the addition of $TiO_2$ and UV irradiation to the ozone oxidation reaction significantly reduced the $E_a$ value and the degradation of 4-NP.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.1112-1113
• /
• 2006

The perovskite- type oxide $(ABO_3)$ containing transition metals on the B-site show mixed (electronic/ionic) conductivity. These mixed-conductivity oxides are promising materials for oxygen permeating membranes. The main objective of this research work is to synthesize and characterization ceramic powders of the Sr-Co-Fe-O system for methane conversion using membrane reactor. SCFO powders were synthesized from the route was based on the complex method of combination of acid EDTA and citrate and shown be available by control efficient of synthesis to performed $SrCo_{0.8}Fe_{0.2}O_{3-\delta$, moreover, it presented easy implementation, reproducibility and operation. Powder ceramic was characterized by XRD, microscopic optic, SEM and TG-DTA.

• 한국가스학회지
• /
• 제9권2호
• /
• pp.50-55
• /
• 2005

본 논문에서는 알칼리 금속 이온 교환된 Y-제올라이트를 합성하여 그 성분과 구조를 여러 가지 분석법을 이용하여 확인하였으며, NOx전환 반응에 대하여 비열 플라즈마 기술과 결합한 이들의 촉매 능력에 대한 시험을 하였다. 합성된 LiY NaY KY, CsY의 NOx환원에 대한 반응성을 $100^{\circ}C$에서 $350^{\circ}C$의 온도 범위에서 NOx미터로 측정하였다. $150^{\circ}C$에서 촉매의 초기 반응성은 LiY < KY < NaY < CsY의 순으로 증가하였다. CsY와 NaY의 반응성은 온도에 따라 증가하다가 $200^{\circ}C$에서 최대에 도달하였고 그 이상의 온도에서는 오히려 감소하였다. KY의 반응성은 $200^{\circ}C$까지는 같은 수준을 유지하다가 그 이상의 온도에서는 감소한 반면 LiY의 반응성은 온도가 올라감에 따라 계속 감소하였다. 알칼리 금속 계열 중에서 반응성이 가장 좋은 CsY촉매는 $170{\~}220^{\circ}C$의 온도범위에서 $80\%$의 NOx 전환율을 나타내었다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제40권10호
• /
• pp.888-893
• /
• 2016

In this study, the solution plasma process was utilized with the aim of degrading synthetic dyes in water at atmospheric pressure. The experiments were conducted in a batch-type reactor consisting of a symmetric wire-wire electrode configuration with rhodamine B (RhB) as the target synthetic dye. The effects of the plasma treatment time and initial dye concentration on the RhB degradation were investigated by monitoring the change in absorbance of RhB solutions. The RhB solutions turned lighter in color and finally colorless with prolonged plasma treatment time, indicating the destruction of dye molecules. The RhB solutions were found to have degraded, following the first-order kinetic process. However, for high initial RhB concentrations, another kinetic process or factor seems to play a dominant role at the initial degradation stage. The fitted first-order rate constant decreased as the initial concentration increased. This result suggests that the degradation behavior and kinetic process of the RhB solution strongly depends on its initial concentration. The RhB degradation is considered to be due to a combination of factors, including the formation of chemically oxidative species, as well as the emission of intense UV radiation and high-energy electrons from the plasma. We believe that the solution plasma process may prove to be an effective and environment-friendly method for the degradation or remediation of synthetic dye in wastewater.

• Journal of Microbiology and Biotechnology
• /
• 제18권7호
• /
• pp.1257-1265
• /
• 2008

To lower the cost of ethanol distillation of fermentation broths, a high initial glucose concentration is desired. However, an increase in the substrate concentration typically reduces the ethanol yield because of insufficient mass and heat transfer. In addition, different operating temperatures are required to optimize the enzymatic hydrolysis (50$^{\circ}C$) and fermentation (30$^{\circ}C$). Thus, to overcome these incompatible temperatures, saccharification followed by fermentation (SFF) was employed with relatively high solid concentrations (10% to 20%) using a portion loading method. In this study, glucose and ethanol were produced from Solka Floc, which was first digested by enzymes at 50$^{\circ}C$ for 48 h, followed by fermentation. In this process, commercial enzymes were used in combination with a recombinant strain of Zymomonas mobilis (39679:pZB4L). The effects of the substrate concentration (10% to 20%, w/v) and reactor configuration were also investigated. In the first step, the enzyme reaction was achieved using 20 FPU/g cellulose at 50$^{\circ}C$ for 96 h. The fermentation was then performed at 30$^{\circ}C$ for 96 h. The enzymatic digestibility was 50.7%, 38.4%, and 29.4% after 96 h with a baffled Rushton impeller and initial solid concentration of 10%, 15%, and 20% (w/v), respectively, which was significantly higher than that obtained with a baffled marine impeller. The highest ethanol yield of 83.6%, 73.4%, and 21.8%, based on the theoretical amount of glucose, was obtained with a substrate concentration of 10%, 15%, and 20%, respectively, which also corresponded to 80.5%, 68.6%, and 19.1%, based on the theoretical amount of the cell biomass and soluble glucose present after 48 h of SFF.

• 대한환경공학회지
• /
• 제22권6호
• /
• pp.1055-1061
• /
• 2000

희분식 반응기에서 폐윤활유를 열분해하였을 때 생성된 오일의 타르생성에 관한 속도연구와 오일의 안정화 연구를 수행하였다. 열분해유에서 타르가 생성되는 과정은 직렬반응과 병렬반응이 결합된 lumped kinetic 모델을 제시하여 실험결과와 비교하였다. 제시된 모델로부터 타르를 생성하는 반응속도 결정단계는 열분해 생성유가 중간반응 단계를 거치지 않고 바로 타르가 되는 경로임을 알 수 있었다. 오일의 안정화를 위해 fly ash와 coke를 첨가하였을 때 타르를 생성하는 물질의 제거 및 산화방지 효과가 큰 것을 확인할 수 있었다.