• Journal of the Korea Institute of Military Science and Technology
• /
• v.25 no.1
• /
• pp.108-116
• /
• 2022

Supply in military operations has a significant impact on overall combat capability and efficiency. Therefore, modernization of military logistics is underway to ensure rapid and accurate distribution. And, effective warehouse management is paramount. This paper proposes a new product allocation model that uses a genetic algorithm. The model considers order frequency and mass of products because the military equipment is usually heavier than available products. A computer simulation shows that products are assigned to optimal locations and reduce the consumed energy for forklifts by more than 25 % with similar travel time. Also, we show the superiority of genetic algorithm by comparing them with other algorithms.

• Journal of the Korea Society for Simulation
• /
• v.23 no.4
• /
• pp.151-161
• /
• 2014

It is very important to evaluate proper acquisition of military aircraft against future threats in our military defense field. In previous studies, the evaluation has been determined in terms of tasking order or weapon power index. These methods compare the combat-effectiveness index and the number of aircraft. However, this study provides simulation analysis of proper quantity decision based on actual operational senarios of military aircraft using System Dynamics. The method reflects the properties of military aircraft operation concepts and considers the rate of failure of main systems on subsystems, as well as repair and crash rates caused by differentials in peacetime and wartime frame.

• Journal of the Korea Society for Simulation
• /
• v.19 no.4
• /
• pp.309-318
• /
• 2010

Simulation-based acquisition(SBA) is a new acquisition paradigm to deliver combat systems cheaper, faster, and better. ROK MND adopts the vision of SBA and is pushing ahead with dramatic reform. However, ROK MND does not develop the SBA architecture framework which facilitates the reuse of tools and techniques and data software code and algorithms among participants of collaborative environments. In this paper, we propose a conceptual Model of architecture framework for SBA. To do so, we analyse acquisition process of MND and propose the to-be operational view that describes fundamental concept for how Government, Industry, and Academia can collaborate and share information more effectively throughout the acquisition process. Furthermore, we identify the tools and techniques that supports the operational nodes, and propose technical view and all view, too. technical view compose of set of standards that can ensure interoperability among tools, techniques and data, and all view provide an overarching description of the architecture.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.43 no.4
• /
• pp.150-160
• /
• 2020

In this paper, we introduce a pilot's scheduling model which is able to maintain and balance their capabilities for each relevant skill level in military helicopter squadron. Flight scheduler has to consider many factors related pilot's flight information and spends a lot of times and efforts for flight planning without scientific process depending on his/her own capability and experience. This model reflected overall characteristics that include pilot's progression by basis monthly and cumulative flight hours, operational recent flight data and quickly find out a pinpoint areas of concern with respect to their mission subjects etc. There also include essential several constraints, such as personnel qualifications, and Army helicopter training policy's constraints such as regulations and guidelines. We presented binary Integer Programming (IP) mathematical formulation for optimization and demonstrated its effectiveness by comparisons of real schedule versus model's solution to several cases experimental scenarios and greedy random simulation model. The model made the schedule in less than 30 minutes, including the data preprocessing process, and the results of the allocation were more equal than the actual one. This makes it possible to reduce the workload of the scheduler and effectively manages the pilot's skills. We expect to set up and improve better flight planning and combat readiness in Korea Army aviation.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.4
• /
• pp.639-647
• /
• 2011

In this paper, we have designed the Anti-Aircraft Artillery(AAA) model for the surface-to-air virtual engagement. The AAA model for the virtual combat simulation needs to detect the present target and estimate the target flight trajectory to find the aiming point. To find collision point of projectile fired from the artillery with the moving air target, we have presented the estimating technique for artillery aiming point. And we have analyzed the target probability of kill using Calton Hit function. Anti-air threat envelops are presented when the target velocity, position and the arrangement of four AAA are varying. Then we have compared the analyzed result using developed model with AEM model of MSA program.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.4
• /
• pp.1822-1829
• /
• 2012

In this research, we developed the Information Circulation Model(ICM) by modifying and supplementing Information Process Model(IPM) in DNS. This ICM is used to simulate some combat situations that could not be considered with the existing DNS. We showed that this improved ICM can be applied to simulation and analysis of a variety of interests compared with IPM in DNS. We expect this study could be a basic research for further development of C4ISR effectiveness analysis in our national defense community.

• Water Engineering Research
• /
• v.6 no.1
• /
• pp.17-30
• /
• 2005

The bed evolution of the stretch of the River Rhine between km-812.5 and km-821.5 is characterised by general bed degradation as a result of the river training works and dredging activities of the last two centuries. The degradation of the river bed affects the water levels, and so the navigation conditions. To combat the erosion of the river bed with the aim to keep up the shipping traffic and to avoid the ecological system damages due to water level reductions, sand-gravel-mixtures were added to the river (so called artificial grain feeding activities). This paper presents the results of an application of a graded sediment transport model in order to study morpholodynamical characteristics due to artificial grain feeding activities in the river stretch. The finite element code TELEMAC2D was used for flow calculation by solving the 2D shallow water equation on non-structured grids. The sediment transport module SISYPHE has been developed for graded sediment transport using a multiple layer model. The needs to apply such graded sediment transport approaches to study morphological processes in the domain are discussed. The calculations have been carried out for the case of middle water flow and different size-fraction distributions. The results show that the grain feeding process could be well simulated by the model.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.6
• /
• pp.653-658
• /
• 2023

In systems like the combat management system of a naval ship or smart city of civilians, where many sensors and actuators are connected, the middle-ware DDS (Data Distribution Service) is mainly used to transmit large amounts of data. It is scalable and can effectively respond to the increase in sensors or equipment connected to the system in the future. The engineering control system (ECS), which plays an important role similar to the combat management system of a naval ship, still uses Server-Client model with industrial protocols such as Modbus and CAN (Controller Area Network) bus, to transmit data, which is unfavorable in terms of scalability. However, as automation and unmanned systems advance, more sensors and actuators are expected to be added, necessitating substantial program modification. DDS can effectively address such situations. The purpose of this study is to confirm the development possibility of an integrated monitoring and control system of a ship by using OpenDDS, which follows the OMG (Object Management Group) standard among the middle-ware DDS used in the combat management system. To achieve this goal, field equipment simulators and an ECS server were configured to perform field equipment data input/output and simulation using DDS was performed. The ECS prototype successfully handled data transmission, confirming that DDS is capable of serving as the middle-ware for the ECS of a ship.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.4
• /
• pp.750-759
• /
• 2015

This paper focuses on reverse simulation methods to find and analyze the required performance of a defense system under a given combat effectiveness. Our approach is motivated that forward simulation, that traditionally employs the effectiveness analysis of performance alternatives, is not suitable for resolving the above issue because it causes a high computational cost due to repeating simulations of all possible alternatives. To this end, the paper proposes a reverse simulation software architecture, which consists of several functional sub-modules that facilitate two types of reverse simulations according to possibility of inverse model design. The proposed architecture also enable to apply various search algorithms to find required operational capability efficiently. With this architecture, we performed two case studies about underwater and anti-air warfare scenarios. The case studies show that the proposed reverse simulation incurs a smaller computational cost, while finding the same level of performance alternatives compared with traditional forward simulation. Finally we expect that this study provides a guide those who desire to make decisions about new defense systems development.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.37 no.2
• /
• pp.1-16
• /
• 2012

NCW(Network Centric Warfare) offers BSEs(Battelspace-Entities) the capabilities of sharing information through C4ISRCommand, Control, Communications, Computers and Intelligence, Surveillance and Reconnaissance) network and it also improves their combat powers based on information superiority with awareness of common situation in battlefield and self-synchronization. Although the concept of NCW was developed at the end of 1990 and there have been various studies for NCW from the development of its concept, the effort for measuring the synergistic effect of NCW is insufficient at the present time. Therefore, in this paper we reviewed literatures concerning the effectiveness measurement of NCW. The category of our survey is network effect, metrics, simulation, battlefield information, social network analysis and mathematical model. The main purpose of this study is to suggest future researchers a research direction by analyzing the aspects and limitations of existing studies about the quantitative measurement of NCW.