• Fisheries and Aquatic Sciences
• /
• v.14 no.4
• /
• pp.333-337
• /
• 2011

A new and a unique Brachionus rotifer was found in Hwajinpo coastal lagoon in Gangwon Province, South Korea. This Brachionus certainly originated from the wild rather than from aquaculture stations because Hwajinpo coastal lagoon has been under rigorous control as a military protected area and therefore could not have been contaminated by aquaculture stations. The new strain was identified as Brachionus rotundiformis based upon its morphological characteristics. The parthenogenetic female of this new rotifer strain typically shows characters similar to those of B. rotundiformis, such as the pot shape of the body, rounded dorsal plate compared with flattened ventral plate, elliptical mictic egg, four frontal spines, six pointed occipital spines, non-nodal foot, two toes, trophi typical of the Brachionus genus with five uncus plates resembling comb teeth, one wide symmetrical manubrium and ramus, and no stiffened spine as is seen in freshwater Brachionus rotifers. Moreover, its lorica was rather small in size compared with other common rotifer strains that serve as live-food organisms (Guam, Thai, and Bali strains). This new and unique Korean brackish rotifer, a B. rotundiformis strain, was therefore named the National Fisheries Research and Development Institute (NFRDI) $N^{\circ}1$ rotifer strain.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.21 no.4
• /
• pp.677-688
• /
• 1997

The purpose of this study was to find out the symbolism of religious costume which has showed the religious belief system through costume practice and culture. Indian Religious costume each has its own mark was investigated in this study. In India, religion is a way of life. It is an integral part of the entire Indian tradition. The results were as follows; India's several main religions are Hinduism(About 80% of population) , Islam (About 11% of population) , Sikhism(less than 2% of population) , Jainism(less than 1% of population) , Buddhism(less than 1% of population) and Christianity(About 3% of population but excluding here) Religious faith system which symbolized Godhood, spiritualty, ascetics, restraint, chastity, sacred and dignity gave a certain shape to each color, ornaments, dressing and marking of religion costume. In connection with religion costumes, there were Hindu's Tika, sacred ash, long hair, knot and holy band (Yajnopavita) , Buddhist's kayysa and tonsures, Jams' no covering, Muslim's chador and skullcap, Sikh's turban (with no cutting hair) , comb, steel bracelet, drawers, sword or dagger. The characteristics, head especially of thebody and white in the colors were made much account for India religion costume. Traditional costume seems to be worn at the present times in India. But apparently these costume associated with religion costume because of Hindu more than 80% of population.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.41 no.5
• /
• pp.939-949
• /
• 2017

This study uses 3D printing technology to design and fabricate a fall impact protection pad with a spacer fabric structure. The design of the pads consists of hexagonal three-dimensional units connected in a honey-comb shape; in addition, the unit consists of a surface layer and a spacer layer. Protect pads were designed as either a hexagonal type or diamond type according to the surface layer structure; subsequently, a spacer filament was also designed as the most basic I-shape type. Designed pads were printed using four types of flexible filaments to select suitable material for a fall impact protection pad. Impact protection performance and bending stiffness were evaluated for the eight type of pad outputs. As a result of the impact protection performance evaluation, when the force of 6,500N was applied, the force passed through the pad was in the range of 1,370-2,132N. FlexSolid$^{(R)}$ and Skinflex$^{TM}$ showed good protection performance and cubicon flexible filament showed the lowest protection. NinjaFlex$^{(R)}$ was found to be the most flexible in the bending stiffness evaluation.

• Journal of the Korea Furniture Society
• /
• v.17 no.2
• /
• pp.57-68
• /
• 2006

This study understands rockers of today and supplies basic data of design and manufacture studying pattern change of rockers arisen in West, there is the purpose. Also, this study is investigated by dividing theoretical background of rockers, 7 kinds of American traditional rockers and European rockers from 18th century to opening part of 20th century and contemporary rockers since 20th century. The theoretical background and the style of 2 rockers (Windsor rocker, Boston rocker) were investigated to study the stylistic changes of rockers. Originally a rocker was invented by a European farmer around 1700. It developed to a household which equip practicality and comfortablness in the United States than Europe. Early rockers in a primal form appeared in the 1740s in the United States. American early rockers connected skate to established chair bridge. Rockers are deep connection with family's emotion. Rockers can provide playing functions for children and medically treating functions for adults. Windsor Rockers developed by attaching skate is mammy bench and according to shape of back form bow or hoop-back rocker, birdcage rocker, comb-back rocker. Windsor Rockers formed peculiar American tradition of craftsman furniture through structure that have a unique back of a chair and round seat. Boston Rockers were the first chairs made by mass production method. They show a particular shape with S-curve style seat and rectangular crest at the upper part of the back. Often Crests were decorated by stenciled pattern with curled leaves such as rosettes and scrolled designs.

• The Research Journal of the Costume Culture
• /
• v.21 no.4
• /
• pp.596-605
• /
• 2013

The purpose of this study is to classify and recreate the grooming styles of facial hair sported by noblemen during the Joseon Dynasty. Using existent portraits painted during this period as corroborative materials, this study has identified the traditional grooming styles of facial hair sought by noblemen in this age. This study has utilized 30 facial hair styles found in the portraits of noblemen inherited from the Joseon Dynasty, which take up the majority of the portraits currently remaining in Korea. To recreate grooming styles of facial hair, this study has divided facial hair into three types according to its location: beards, moustaches and whiskers. Based on the analysis of these divided grooming styles, this study has recreated grooming styles of facial hair by using artificial modelling heads, artificial hair, artificial glue, scissors, and a comb. The grooming styles of facial hair recreated by this study are closest to those that noblemen sought and did wear during the Joseon Dynasty. The results of this study are as follows. First, they groomed their moustaches in the 八 shape. Next, they wore their beards in the shape of an inverted triangle. Finally, they also grew and groomed whiskers. Though there are individual differences in the location, length, and volume of facial hair, noblemen in the Joseon Dynasty generally sought to wear their facial hair neat and long. Little research has been done to recreate and present noblemen's grooming styles of facial hair focusing on portraits. Thus, the findings of this study are expected to be utilized as basic materials for the education and research of grooming styles of facial hair according to ages. They can also be used as basic materials for recreating facial hair in historical dramas.

• Science of Emotion and Sensibility
• /
• v.22 no.2
• /
• pp.83-100
• /
• 2019

The purposes of this study are to identify the meaning of the geometrical patterns preferred by ancient Korean peoples and to classify them into some groups by their similarity. We investigated various patterns found on clothing and relics from GoJoseon to Goguryeo period, and utilized secondary sources such as history articles, Internet materials and photo and analyzed the associations of the varied patterns found in pottery, handicrafts, and clothing with the ancient cultures. We found the letters (ㅇ, ㅁ, and ㅅ of Korean alphabet, Hangul) preferred by ancestors who worshipped nature to identify the significations attached by them to particular patterns. The results confirm the following: first, the circle pattern indicated the sun, moon, stars in the sky, a bronze mirror, and a man's face. Circles and ovals were also observed to represent the individual souls of the clan or community. Second, square patterns symbolized the land and the patterns that signified the wellbeing of family and the country. Oblique rectangles were more frequently used as they represented a double use of the triangle, a shape that implied mystic power. Third, triangle symbolized regeneration, power, and humanity. While the Neolithic Age jade remnants of hair combs appear not to be irrelevant to the process of comb-shaped pottery production of the time, many fine comb-like lines may be found on bronze mirrors. Through its review of the glorious designs inherited from and established by ancient ancestors, the present research endeavor may help in identifying the spirits and traditions of Korean history.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.11 no.2
• /
• pp.1-6
• /
• 1982

The constituents of sugar, enzyme activity and number of pollens in standard honey (gathered from my own honey comb.) and commercial ones collected from local markets) were determined to know the difference between above two kinds of honey. The results obtained were as follows. 1. The constitution of saccharides in commercial honey was higher at 1% than the standard one. The average content showed 45% of fructose,41% of glucose, 3% of dextrin and 2% of sucrose. 2. Pollen contained in honey were mainly composed of oval and globe shape. The nunlber of pollen contained in standard honey was five times more than that in commercial ones .3. ${\alpha}-amylase$, ${\beta}-amylase$ and protease activity of standard honey were greated 5,2,2 times respectively comparing with that of commercial one, and acid protease activity with each sample was higher than the neutral.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.9
• /
• pp.1235-1240
• /
• 2010

Wire-woven Bulk Kagome (WBK) is fabricated by assembling helically formed wires in six directions. To date, WBK samples have been assembled manually. For industrial application, the assembly process must be automated. Furthermore, if WBK is to be fabricated using flexible wires that cannot maintain their helical shape during fabrication, a specialized automatic machine, i.e., a loom needs to be developed. In this work, we designed and constructed a loom for fabricating WBKs using flexible wires. This loom is operated by one rotation of the upper plate, two translations of the insertion device, and insertion of wires. So-called "comb devices" are placed between multiple layers of Kagome nets to prevent the wires that are already in place from getting entangled with those that are being inserted. This loom can be also used to fabricate semi-WBKs composed of helically formed wires and rigid straight wires.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.10 s.175
• /
• pp.174-185
• /
• 2005

This paper presents the design, fabrication, and testing results of a dual stage actuator system for a fine positioning of magnetic heads in magnetic disk drives. A novel rotary microactuator which is electrostatically driven and utilized as a secondary actuator was designed. The stator and rotor electrodes in the microactuator was revised to have the optimal shapes and hence produces much higher rotational torque compared with the conventional comb-shape electrodes. The microactuators were successfully fabricated using SoG(silicon on glass) processing technology, which is known as being cost-effective. The fabricated microactuator has the structural thickness of $45{\mu}m$ with the gap width of approximately $3{\mu}m$. The dynamic characteristic of microactuator/slider assembly was investigated, and its natural frequency and DC gain were measured to be 3.4kHz and 32nm/V, respectively. The microactuator/slider assembly was integrated into a HDD model V10 of Samsung Electronics Co. and a dual servo algorithm was tested to explore the tracking performance of dual stage actuator system where the LDV signals instead of magnetic head signals were used. Experimental results indicate that this system achieves the tracking accuracy of 30nm. This value corresponds to a track density of 85,000 track per inch(TPI), which is about 3 times greater than that of current hard disk drives.

• Macromolecular Research
• /
• v.15 no.2
• /
• pp.95-99
• /
• 2007

The most recent developments in two areas: (a) synthesis of inorganic particles with control over size and shape by polymer additives, and (b) synthesis of inorganic-polymer hybrid materials by bulk polymerization of blends of monomers with nanosized crystals are reviewed. The precipitations of inorganics, such as zinc oxide or calcium carbonate, in presence and under the control of bishydrophilic block or comb copolymers, are relevant to the field of Biomineralization. The application of surface modified latex particles, used as controlling agents, and the formation of hybrid crystals in which the latex is embedded in otherwise perfect crystals, are discussed. The formation of nano sized spheres of amorphous calcium carbonate, stabilized by surfactant-like polymers, is also discussed. Another method for the preparation of nanosized inorganic functional particles is the controlled pyrolysis of metal salt complexes of poly(acrylic acid), as demonstrated by the syntheses of lithium cobalt oxide and zinc/magnesium oxide. Bulk polymerization of methyl methacrylate blends, with for example, nanosized zinc oxide, revealed that the mechanisms of tree radical polymerization respond to the presence of these particles. The termination by radical-radical interaction and the gel effect are suppressed in favor of degenerative transfer, resulting in a polymer with enhanced thermal stability. The optical properties of the resulting polymer-particle blends are addressed based on the basic discussion of the miscibility of polymers and nanosized particles.