• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2000년도 제1회 학술대회 논문집
• /
• pp.221-222
• /
• 2000

The vibration of a mask degrades the color purity in CRT. In order to reduce the vibration. a damping wire is put into contact with the mask in the Flatron. We analyzed the vibration of the mask considering the damping wire using FEM. The natural frequencies and mode shapes of the mask are calculated by modal analysis. And those are compared with the measured results to confirm our finite element model. The modal analysis of the wire is also performed to investigate resonance with the mask. Finally, the transient dynamic analysis of the mask contacting with the wire is performed. The vibration of the mask is measured to confirm our analysis, and the results are in good agreement with the analysis.

• Transactions on Electrical and Electronic Materials
• /
• 제6권3호
• /
• pp.91-96
• /
• 2005

We report the efficient red light-emitting diodes based on the fluorescent dye 4-(dicyanomethylene)-2-i-propyl-6-(1,1,7,7-tetramethyljulolidyl-9-enyl)-4H-pyran (DCJTI) and 5,6,11,12-tetraphenyl naphthacene (rubrene) codoped in the tris(8-hydroxyquinoline)aluminum $(Alq_3)$. Luminance efficiency of 2.2 cd/A with a Commission International De L'Eclairage (CIE) chromaticity coordinate of x, y = (0.640, 0:350) are achieved at the driving current density of $20\;mA/cm^2$. Adding the rubrene to the DCJTI in tris(8-hydroxyquinoline)aluminum $(Alq_3)$, the red color purity and luminance efficiency improved comparing to the DCJTI only doped devices because the rubrene molecules assist the polarization effect of DCJTI by molecular interaction and enhance the energy transfer from $(Alq_3)$ to DCJTI.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 제5회 영호남 학술대회 논문집
• /
• pp.76-80
• /
• 2003

Recently as new digital media like High Definition Television (HDTV) have been made popularization. However In case of image quality characteristics of AC PDP, the problem especially raised is 'image sticking' phenomenon, the phenomenon that the previously displayed pattern still remains after the image in realizing high picture quality. In this paper, Image sticking Phenomena observed in AC PDP are defined and classified, these effects are analyzed as luminance, color purity through chromaticity diagram and firing voltage state using light waveform.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 1998년도 학술발표회논문집
• /
• pp.242-244
• /
• 1998

Over the years manufactures have become increasingly aware of the importance of water purity and its effect on the quality of the final product. One of the largest problems that confronts pure water system operators is bacterial recontamination shortly after the water purification equipment. There are several recommended methods of either preventing or recommended methods of either preventing or removing such contamination but most have inherent disadvantages. Drinking water has required new treatment techniques such as ozonation and granular activated carbon(GAC) filtration. Ozone is known to be a powerful oxidant and disinfectant. Therefore it has been found to be necessary for the treatment of taste, odor and color as an oxidant of inorganic and organic compounds.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.89-90
• /
• 2006

We synthesized emissive materiaJs, nameJy $Zn(HPB)_2$. The fundamentaJ structures of the OLEDs were ITO / NPB (40 nm) $Zn(HPB)_2$ (40 nm) / $Alq_3$:DCJTB (20, 30, or 40 nm) / LiF / AI. We varied the thickness of $Alq_3$:DCJTB from 20 nm to 40nm. We measured current density-voJtage and luminance-voJtage characteristics at room temperature. When the thickness of the Alq3:DCJTB layer was 40 nm, white emission is achieved. The CIE coordinates are (0.32, 0.33) at an applied voltage of 14V.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.628-631
• /
• 2007

We developed new green emitting materials based on the spiro moieties. The introduction of a spiro linkage into the structure of DJGH series lead to a reduction in crystallization tendency and an increase in glass transition temperature. they showed much better emitting efficiency and color purity than commercial host material $Alq_3$.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.439-442
• /
• 2007

Novel blue materials based on anthracene derivatives were synthesized by Grignard reaction, the Suziki coupling reaction, etc. They showed excellent thermal stability and emitted bright blue light, which will been used for OLED and expected to obtain high efficiency and good color purity.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.606-609
• /
• 1999

We fabricated white light-emitting diode which have a mixed single emitting layer containing poly(N-vinylcarbazole), trois(8-hydroxyquinoline)aluminum and poly(3-hexylthiophene) and investigated the emission properties of it. It is possible to obtain a blue light from poly(N-vinylcarbazole). green light from tris(8-hydroxyquinoline)aluminum and red light from poly(3-hexylthiophene). The fabricated device emits white light with slight orange light. We think that the energy transfer in a mixed layer occurred from PVK to Alq₃ and P3HT resulted in decreasing the blue light intensity from PVK. We find that the efficiency of the white light electroluminescent device can be improved by injecting electron more effectively and blue light need to improve the color purity of white light.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 C
• /
• pp.1677-1679
• /
• 2003

One of the main problems in AC PDP is that the previous bright image overlaps on the new image, that is called as image sticking. In this paper, Image sticking Phenomena observed in AC PDP are defined and classified, these effects are analyzed as luminance, color purity through chromaticity diagram and firing voltage state using light waveform.

• 한국군사과학기술학회지
• /
• 제10권3호
• /
• pp.51-61
• /
• 2007

This paper concerns about the requirement analysis for night vision imaging system(NVIS), whose purpose is to intensify the available nighttime near infrared(IR) radiation sufficiently to be caught by the human eyes on a miniature green phosphor screen. The requirements for NVIS are NVIS radiance(NR), chromaticity, daylight legibility/readability, etc. The NR is a quantitative measure of night vision goggle (NVG) compatibility of a light source as viewed through goggles. The chromaticity is the quality of a color as determined by its purity and dominant wavelength. The daylight legibility/readability is the degree at which words are readable based on appearance and a measure of an instrument's ability to display incremental changes in its output value. In this paper, the requirements of NR, chromaticity, and daylight legibility/readability for Type I and Class B/C NVIS are analyzed. Also the rationale is shown with respect to those requirements.