• 한국식품영양학회지
• /
• 제11권6호
• /
• pp.606-611
• /
• 1998

For waste recyle, we were investigated on Gardenia blue color production using Gardenia by-product by Bacillus subtilits. Optimum conditions for producing blue pigment were found to be 30$^{\circ}C$, initial pH 6.5, glucose as a carbon source 3% and yeast extract as a nitrogen source 0.5%, respectively. Optimum conditions for fermentor culture were agitation speed 400rpm, aeration 2 vvm and inoculum 5%. The optimum perculture time for inoculum was 20 hrs for blue pigment production.

• 한국환경과학회지
• /
• 제16권8호
• /
• pp.929-939
• /
• 2007

Red mud is a waste generated by the aluminium industry, and its disposal is a major problem for this industry. Red mud has a reddish-brown color and superfine particle characteristics. So, it can be a promising pigment admixture for concrete industry. An experimental study was conducted to investigate the potential use of red mud in color concrete. The micro structures of red mud and iron oxide pigment such as porosity, pore size distribution, diameter of particle were analyzed with the aid of SEM, X-ray diffraction(XRD), and the infrared absorbance. Tests on physical properties of color concrete, such as strength, slump, early shrinkage crack patterns, and color characteristics were carried out and the results were reported in this paper.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.131-132
• /
• 2023

Recently, the construction industry has seen the emergence of interior and exterior finishes using ultra-high performance concrete (UHPC) and colored concrete products using precast concrete (PC). However, the excessive amount of pigment used for coloring reduces the strength of the concrete. There is a need to improve the durability and chromaticity of colored concrete, and further analytical studies on the properties of colored concrete are also required. Therefore, in this paper, colored ultra-high strength cement composites (C-UHSCC) containing red and green inorganic pigments were prepared, and the compressive strength and color of the specimens were measured according to the age, and the correlation between strength and color was analyzed by simple linear regression analysis using R² value. The results showed that the red color was highly correlated with L^* and a^*, and the green color was highly correlated with a^*. These results can be considered for various concrete formulations, but research is needed to suggest the optimal pigment mixing ratio for proper strength and color development.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2001년도 추계학술발표논문집
• /
• pp.55-56
• /
• 2001

지난 수년간 유럽을 중심으로 Carbonate의 PSD (Particle Size Distribution)가 도공지 의 백색도, 불투명도, Coverage등에 미치는 영향에 대하여 많은 연구가 진행되어 왔다. 현재 국내의 Coating Pigment System 역시 Carbonate 위주로 구성되어 있으나, 입자 분포에 따른 실증적 연구가 선진국에 비하여 부족한 상태이다. 본 연구는 최근 유럽에서 사용 중인 Narrow PSD Carbonate가 도공지 품질에 미치는 영향을 검토한 것으로서, 특히 Multiple Coating에서의 도공층 구조변화와 그에 따른 백지물성 및 인쇄적성의 변화를 연구한 것이다. 실험의 Case는 Broad PSD CaC03와 Narrow PSD CaC03를 비 교하였 다 .. Color F Formulation은 Pre Color에서 #1 Clay 30 p따t와 각각 CaC03 70 p따t를 사용하였다. 그리고 바인더와 첨가제는 동일하게 사용하였다 .. Top color Formulation 또한 동일하 게 사용하였다. 코팅방식은 speed 450rrνmin, pre rod coating, top blade coating 방식 으로 CLC (Cy lindrical Laboratory Coater)를 사용하여 코팅하였다. 백지품질은 백색도, 평활도 ,광택도, 거칠음도, Bum Out Test와 Coverage( SEM 사 진 Z -direction) 등을 측정하였다. 인쇄품질은 인쇄 광택도, 인쇄 Picking strength와 2 도 인쇄 농도를 측정하였다. 백색도는 Narrow PSD CaC03를 사용한 것이 Broad PSD CaC03를 사용한 것 대비 약1% 우수하였다. 이것은 Narrow PSD CaC03를 사용한 것이 filter cake이 많이 open 되 어 있어 dewatering이 빠르고, Wet void volume이 증가되 어 부동화점 의 농도가 낮 아져 원지 층으로 침 투되 는 pigment가 작고 표층에 잔류하는 pigment와 void volume의 증가로 인해 기공층이 증가한 것으로 판단된다. 그리고, 백지광택도, 거칠음도 등 또한 Narrow PSD CaC03를 사용한 것이 우수하였 다. 이는 Pre color에서 coverage의 개선으로 top color층의 도공량 uniformity가 개선 된 이유라고 생각한다. 그러나 인쇄품질은 백지와 비교하여 차이가 없었다. 이것은 top 칼라 Formulation이 동일하고, 인쇄시 잉크흡수 거동은 top color 층에 주로 영향을 받기 때문이라고 판단 된다. 향후에는 인쇄품질의 향상을 위하여 Case 2의 CaC03 100% 사용가능성 및 Pre Color 는 Case 2로 고정하고, Top칼라를 변경하는 방법을 또한 생각할 필요가 있다고 판단된다.

• 펄프종이기술
• /
• 제47권2호
• /
• pp.70-79
• /
• 2015

This study was carried out to analyze deterioration characteristics of color-pigments painted Hanji to preserve and restore the cultural properties. On the traditional painting technique, glue was used with pigments in various ways for painting, but it eventually caused the deterioration of paintings. Thus, five colors were selected and analyzed for this study for investigating their characteristics of deteriration. Three kinds of glues (Wugyo, Nokgyo, and Togyo) and two kinds of pigments (Chinese and Gilsang) were painted on the Hanji for the accelerated aging test. And then color fastness of pigments and tensile strength of painted Hanji were measured for the estimation of deterioration degree. The results of SEM-EDS showed that Chinese pigments including blue, yellow, green, and red were composed of inorganic substances but the brown was organic substance. Gilsang pigments were composed mainly of Si and Ti ions. Color fastness of the Gilsang pigment blue, yellow, green, and brown were better than those of Chinese. Chinese pigment brown with organic substance showed the worst color fastness. Generally, Chinese pigments painted Hanji showed higher tensile strength than Gilsang in the accelerated aging test. Hanji treated with Chinese pigment and Nokgyo (antler glue) blends and Gilsang pigment and Togyo (rabbit pelt glue) blends showed higher tensile strength than the others. And Andong Hanji showed the highest tensile strength.

• 한국가금학회:학술대회논문집
• /
• 한국가금학회 2002년도 가을 학술발표논문집
• /
• pp.113-115
• /
• 2002

본 시험은 시판 착색제의 형태 및 혼합 수준에 따른 산란성적, 난황 착색도 및 난황 지방산 농도에 미치는 영향을 검토하기 위하여 실험 1과 2로 나누어 실시하였다. 실험1과 실험2에서 사료섭취량, 산란율, 난중 및 사료효율은 착색제의 첨가에 따른 영향이 없었으며, 난질에 있어서도 난백고와 haugh unit은 착색제 첨가와 전혀 관련이 없는 것으로 나타났다. 실험1에서 난황착색도가 Roche color fan 12∼13에 근접하기 위한 천연 red 착색제 첨가 수준은 25∼30ppm이었고, 합성 red 착색제는 15∼20ppm이었으며, 본 시험의 조건에서는 천연착색제보다 합성착색제의 착색효과가 우수한 것으로 나타났다. 실험2에서 착색제 혼합에 따른 착색 효과는 천연 red 착색제를 첨가한 TM2구와 동일한 양의 합성 red 착색제를 첨가한 TM6구를 비교하였을 때, 천연 red 착색제 보다 합성 red 착색제의 착색효과가 우수하였다. 난황내 지방산 함량은 착색제 첨가로 인한 영향이 나타나지 않았다.

• 보존과학회지
• /
• 제28권2호
• /
• pp.101-112
• /
• 2012

동관왕묘(보물 제142호)는 조선시대(1602)의 건축물로서 관우, 장비, 우장군, 주창 및 조자룡 등의 소조상이 안치되어 있다. 이 소조상들의 채색층은 먼지 등 무기오염물로 인해 안료의 원색이 손상되었으며, 수차례의 보수 및 덧칠로 인해 원형이 훼손되어 있다. 소조상의 채색안료에 대한 정밀분석을 위해 X-선 회절분석, SEM-EDS, P-XRF 및 색도 측정을 실시한 결과, 적색과 갈색의 안료는 진사, 석간주, 연단이며, 연적색은 석고를 첨가하여 조색하였다. 흑색과 금색은 각각 흑연과 금(Au)박이 사용되었으며, 녹색 안료에서는 공작석, 염화동 및 해록석이 동정되었다. 매우 선명하게 발색된 청색은 현대 안료로 보채한 것으로 판단되며, 백색은 백악, 석고, 연백이 모두 검출되었다. 석황과 밀타승은 각각 황색과 연황색 채색에 사용되었다.

• Animal Bioscience
• /
• 제36권12호
• /
• pp.1853-1859
• /
• 2023

Objective: This study aimed to explore the effects of different types of xanthophyll extracted from marigold on the growth performance, skin color, and carcass pigmentation. Methods: A total of 192 healthy 60-day-old yellow-feathered broilers weighing an average of 1,279±81 g were randomly allocated to 4 groups, each with 6 replicates and 8 broilers. The 4 treatments were as follows: i) CON group, fed with basal diet; ii) LTN group, supplemented with lutein; iii) MDP group, supplemented with monohydroxyl pigment including dehydrated lutein, β-cryptoxanthin, and α-cryptoxanthin; iv) LTN+MDP group, supplemented with lutein and monohydroxyl pigment in proportion to 1:1. The supplementary content of LTN, MDP, and LTN+MDP was 2 g/kg. Skin color was measured after 7, 14, 21, and 28 days of feeding the dietary treatments. The breast, thigh, and abdominal fat of slaughtered chickens were stored in cold storage at 4℃ for 24 hours and then the meat color of lightness (L^*), redness (a^*), and yellowness (b^*) values was determined. Results: The results showed that all treatments enhanced the yellow scores of subwing skin on day 14, 21, and 28 (p<0.05), and the mixture of lutein and monohydroxyl pigment promoted the yellow scores of shanks on day 14, 21, and 28 (p<0.05). The mixture of lutein and monohydroxyl pigment increased the yellow scores of beaks and all treatments enhanced the yellow of shanks on day 28 (p<0.05). In addition, all treatments improved the yellow (b^*) values of breast and thigh muscle, moreover, the monohydroxyl pigment and the mixture of lutein and monohydroxyl pigment enhanced the values of redness (a^*) and yellow (b^*) of abdominal fat (p<0.05). Conclusion: In summary, different types of xanthophyll extracted from marigold significantly increased the yellow scores of skin color and the yellow (b^*) values of carcass pigmentation. Especially, the mixture of lutein and monohydroxyl pigment was more efficient on skin color.

• 한국의류학회지
• /
• 제30권8호
• /
• pp.1169-1177
• /
• 2006

The aim of this study was to investigate the change of the weight loss, tensile strength, flex stiffness, and color-values of the pigment-dyed cotton, polyester/cotton, polyester and nylon fabrics after washing process. Pigment-dyed cotton and polyester/cotton fabrics were treated with the cellulase, of which concentrations were 0, 1, 3 and 5g/l. The time of washing process ranges from 30 to 120 minutes. Pigment-dyed polyester and nylon fabrics were treated without enzyme, of which the washing temperature were 13, 30, $55^{\circ}C$ and the washing time ranges from 30 to 120 minutes. Also, they were tested in terms of the influences of agitation speed(rpm) and additives such as softeners, enzymes, detergents. The weight loss and tensile strength of the pigment-dyed cotton and polyester/cotton fabrics were positively correlated with the concentration of cellulase and washing time. Neither polyester nor nylon fabrics exhibited any change of the weight. All fabrics showed the decline of flex stiffness and decoloration after washing process. Decoloration of cotton and polyester/cotton fabrics was due to both the influence of cellulase and the mechanical rubbing. On the other hand, that of polyester and nylon fabrics was caused by the mechanical rubbing only.

• 한국식품영양과학회지
• /
• 제23권1호
• /
• pp.125-129
• /
• 1994

The acetone extracted pigment from the cell mass of Rhodophila globiformis DSM 161 was generally red. In a pH 5-6 condition, the color of pigment was red, while in p/h 7-9 condition it was yellowish red. The pigment was stable at pH range between 6.0-11.0 and below 4$0^{\circ}C$. In the presence of light and oxygen , the pigment was rapidly degraded and became unstable in the presence of metal ions such as Fe3++(1.0$\times$ 10-2M, 1.0$\times$10-3 M), Al3+ (1.0$\times$10-2 M, 1.0$\times$10-3 M) and Zn2+(1.0$\times$10-2 M). But in the presence of Zn2+ (1.0$\times$10-2M). But in the presence of Zn2+ (1.0$\times$10-3 M) it was very stable. Through visible absorption scanning ,it showed five sharp absorption peaks at 358 , 385, 494, 680 ad 748 nm with three shoulder peaks at 410, 466 and 522nm. On the results of TLC analysis , it was shown to be composed of seven color fractions.