• 국제학술발표논문집
• /
• The 3th International Conference on Construction Engineering and Project Management
• /
• pp.224-229
• /
• 2009

Digital image recognition has been used for steel bridge surface assessment since late 1990s. However, the non-uniform illumination problems such as shades, shadows, and highlights are still challenges in image processing to date. Therefore, this paper develops a new approach to tackle the non-uniform illumination problem for rust image adjustment. The inhomogeneous illumination problem is divided into shades/shadows and highlights in this paper. The proposed BEMD-morphology approach (BMA) utilizes the bidimensional empirical mode decomposition to mitigate the shade/shadow effect, and the morphological processing to detect and replace the highlight area. Finally, the rust image processed with the BMA will be segmented by the K-Means algorithm, one of the most popular and effective methods, to show the effectiveness of illumination adjustment.

• 한국축산식품학회지
• /
• 제27권1호
• /
• pp.35-41
• /
• 2007

pH 조절과 소금 첨가에 따른 돼지 뒷다리 부위를 이용한 수리미의 품질특성을 파악하기 위하여 C(명태수리미, 수세 2회, 소금 무첨가), 나머지 처리구들은 돼지 뒷다리 부위를 활용하여 제조한 수리미로 T1(pH 3.0, 소금 무첨가), T2(pH 3.0, 소금 첨가), T3(pH 11.0, 소금 무첨가) 및 T4(pH 11.0, 소금 첨가) 처리구로 하여 시험한 결과를 요약하면 다음과 같다. 육색은 pH가 높을수록 $L^*$값과 W값은 높았지만 $a^*$값과 $b^*$값은 현저하게 낮게 나타났다(p<0.05). 소금 첨가로 W값은 높았지만 $a^*$값과 $b^*$값은 현저하게 낮게 나타났다(p<0.05). 조직감의 응집성은 pH가 높을수록 높게 나타났으며(p<0.05), 탄력성을 제외한 모든 조직특성은 소금 첨가로 인해 현저하게 높게 나타났다(p<0.05). 파괴강도와 젤강도는 pH가 높을수록 높게 나타났고(p<0.05), 파괴강도, 젤강도 및 젤리강도는 소금 첨가로 인해 높게 나타났으나, 전단가는 오히려 낮게 나타났다(p<0.05). 관능검사 결과 연도는 pH가 높을수록 높게 나타났고(p<0.05), 소금 첨가로 인해 모든 관능평가 항목은 현저하게 높게 나타났다(p<0.05). pH 조절과 소금 첨가 유무 상호작용에는 육색, 조직감, 파괴강도, 변형값, 젤강도, 전단가 및 관능검사 결과는 현저한 차이가 없었다(p>0.05). 처리간에는 T2와 T4가 C와 가장 유사한 육색, 조직감, 물리적 특성 및 관능검사 결과를 나타내었고, 그 중에서도 pH 11.0 조절과 2% 소금 첨가구인 T4가 전반적으로 더 좋은 품질이었다.

• Journal of Information Processing Systems
• /
• 제12권4호
• /
• pp.765-778
• /
• 2016

In watermarking schemes, the discrete wavelet transform (DWT) is broadly used because its frequency component separation is very useful. Moreover, LU decomposition has little influence on the visual quality of the watermark. Hence, in this paper, a novel blind watermark algorithm is presented based on LU transform and DWT for the copyright protection of digital images. In this algorithm, the color host image is first performed with DWT. Then, the horizontal and vertical diagonal high frequency components are extracted from the wavelet domain, and the sub-images are divided into $4{\times}4$ non-overlapping image blocks. Next, each sub-block is performed with LU decomposition. Finally, the color image watermark is transformed by Arnold permutation, and then it is inserted into the upper triangular matrix. The experimental results imply that this algorithm has good features of invisibility and it is robust against different attacks to a certain degree, such as contrast adjustment, JPEG compression, salt and pepper noise, cropping, and Gaussian noise.

• Fibers and Polymers
• /
• 제5권4호
• /
• pp.321-326
• /
• 2004

[ $TiO_2$ ] contents in yarns can influence color yield so that dyeing quality of industrial polyethylene terephthalate (PET) yarns can be improved through the adjustment of $TiO_2$ contents. To evaluate the dyeing performance of color yield, the chips which included the different $TiO_2$ contents of 330,550, and 1,100 ppm respectively were used to produce the yarns of different $TiO_2$ content by a spin-draft machine. The physical and structural properties of the yarns were measured to investigate effect of the $TiO_2$ contents on them. Dye uptake and dyeing rate were also evaluated using a colorimeter to compare the yarns having different TiOz contents. The experimental results showed that there were no appreciable variation in physical and structural properties among the yarn samples and no difference were observed among the dyed fabric samples with regard to dyeing uptake and dyeing rate. However, the color yield of dyed fabrics increased as $TiO_2$ contents decreased in the yarns especially when the fabric samples were dyed to pale shade. The physical reasoning could be proposed on why the yarns having low $TiO_2$ contents appeared to have higher color yield after dyeing.

• Journal of the Optical Society of Korea
• /
• 제15권1호
• /
• pp.44-51
• /
• 2011

In this paper, an easy-to-use measurement device for illumination distribution is developed. The device consists of a sensor array module, a control module, and a PC interface. The sensor array module incorporates CIE 1931 color sensors and the ARM-based 96 MHz microcontroller in the control module for measurement and data processing. The sensor array module contains 64 color sensors arranged in a $16{\times}4$ array. The sensitivity of the sensor array module can be adjusted depending on the illumination level to be measured. The measurement data and control signals are exchanged via USB 2.0 standard. To demonstrate the performance of the device, the illumination distribution is measured for colors of red, green, and blue and is graphically shown. The device can be used for measurement of the illumination distribution, design and adjustment of LED illumination.

• 복식문화연구
• /
• 제19권3호
• /
• pp.612-621
• /
• 2011

The process of making or cultivating indigo dyes is very cumbersome and complex. The dye extraction and dyeing methods using general plant dye, moth repellent dye, fast acting natural dye, and other dyes are very different. This research investigates the extraction of indigo dye and liquid dye extraction of polygonum(indigo) plants using calcium oxide water. While extracting indigo dye the concentration of purified indigo dye may be controlled by adjusting the pH level. Due to the various uses of dyes the adjustment of surface color must be considered. In regard to the change according to different concentrations of reducing agents, it was found that cotton fabrics and ramie fabrics show the highest color difference at 0.4% and 0.3% respectively. As the reduction temperature increases, the color difference increases as well. The maximum color difference was found to appear at $90^{\circ}C$. Cotton fabrics and ramie fabrics showed 70.55 and 67.01 respectively. The color difference increases as the concentration of dyes increases, but at a concentration of 300%, cotton fabrics was found to show 6.22PB in H value using the Munsell color system, containing purple and blue color. The pH of the polygonum dyes extracted through this experiment were adjusted by adding calcium oxide to the experimental water, without directly adding calcium oxide to the liquid polygonum extract. In a refine state, it was mixed with polygonum extract to extract a more refine and highly concentrated indigo dye. When lye and reducing agents are added to extracted indigo dye and sealed for long-term storage, it can be effective and easily used for dyeing.

• 방송공학회논문지
• /
• 제22권3호
• /
• pp.327-338
• /
• 2017

노출 합성은 두 장 이상의 서로 다른 노출 값을 갖는 좁은 동적 영역 영상을 합쳐 한 장의 넓은 동적 영역을 갖는 결과 영상을 생성하는 알고리듬이다. 본 논문은 블록기반의 지역적 특성을 고려한 노출 조정 기법과 개선된 채도 특성 요소를 이용해 가중치 맵을 생성하는 알고리듬을 제안한다. 제안하는 노출 조정 기법은 인간시각체계의 특성을 고려하여 입력 영상의 노출 값을 보정함으로써 노출 합성 결과 영상 내의 세밀한 부분을 효과적으로 보존한다. 개선된 채도 영상은 입력 영상 내의 포화 영역을 효과적으로 반영한 가중치맵을 생성한다. 본 논문은 기존의 대표적인 노출 합성 알고리듬과의 주관적 화질과 MEF-SSIM, 수행 시간 비교를 통해 제안하는 알고리듬의 우수성을 입증하였다.

• 전기학회논문지
• /
• 제59권1호
• /
• pp.134-137
• /
• 2010

An LED sensor luminaire for visual function improvement necessitates the control algorithm for light level adjustment and the appropriate lens design. The control algorithm adapts to surround lighting condition, and thus has the advantages of energy saving and glare reduction. The multi-cell lens design improves color temperature uniformity and spatial light distribution of the luminaire. Experimental and simulated results show that this approach contributes noticeably to energy saving and color temperature uniformity of the LED sensor luminaire.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2007년도 춘계학술대회 논문집
• /
• pp.97-100
• /
• 2007

Recently, since adjustment systems of various CCT(Correlated Color Temperature) are much developed, lighting environment of indoor has created by such various CCT lighting systems. If an indoor image of fixed CCT will quickly correct images of various CCT, lighting or interior designers can utilize it to persuade his or her clients in the indoor lighting planning process. Therefore, this paper presents fundamental data which are RGB data of seven color images for the correction of image by three different CCT.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.224-227
• /
• 1999

This paper presents a design of the real-time preprocessor for CMOS image sensor suitable to the digital camera applications. CMOS image sensor offers some advantages in on-chip integration, system power reduction, and low cost. However, it has a lower-quality image than CCDs. We describe an image enhancement algorithm, which includes color interpolation, color correction, gamma correction, sharpening, and automatic exposure control, to compensate for this disadvantage, and present its efficient hardware architecture to implement on the real-time processor. The presented real-time preprocessor was designed using VHDL, and it contains about 19.2K logic gates. We also implement our system on FPGA chips in order to provide the real-time adjustment and it was successfully tested.