• Korean Journal of Optics and Photonics
• /
• v.24 no.2
• /
• pp.64-70
• /
• 2013

In this paper, two white light emitting diodes(LEDs) were manufactured by using two kinds of yellow phosphor, YAG:Ce and $(Sr,Ba)_2SiO_4:Eu$, and their spectroscopic properties were compared and analyzed. We found that the asymmetric double sigmoidal function can be applied to both white LEDs to obtain the center wavelength, the half width, and the skewness parameters. According to this analysis, the half width of the emitting spectrum of silicate phosphor was smaller than that of YAG phosphor, indicating smaller color rendering index. However, the silicate phosphor exhibited better color stability depending on the driving current than the YAG phosphor. The current dependence of the luminous efficacy of both white LEDs was investigated, which showed that efficacy decreased monotonically with current. The efficacy of the silicate-based white LED was lower than that of the YAG-based LED by about 10~12 lm/W.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.12
• /
• pp.23-30
• /
• 2009

LEDs are increasingly used for many applications including automotive, aviation, display, transportation and special lighting applications. Generally, the RGB multichip LED luminaire applied to signboard, emotional lighting system and display device and the white LED luminaire applied to general lighting system. white LED spectra for general lighting should be designed for high luminous efficacy as well as good color rendering. This paper describes characteristics of LED luminaire white LED and RGB multichip LED. Two type of LED luminaire prototype used experiment physical, electrical and optic test and performance analyzed. RGB multi-chip and phosphor-type white LED luminaire were analyzed by experiment on their color characteristics and luminous efficacy of radiation, distribution curve, and electrical characteristics. Research work is in progress to develop an improved performance for optic and electrical works well for two type of LED luminaires.

• Korean Journal of Materials Research
• /
• v.29 no.2
• /
• pp.116-120
• /
• 2019

We prepared $Y_3Al_5O_{12};Ce^{3+},Pr3^{+}$ transparent ceramic phosphor using a solid state reaction method. By XRD pattern analysis and SEM measurement, our phosphors reveal an Ia-3d(230) space group of cubic structure, and the transparent ceramic phosphor has a polycrystal state with some internal cracks and pores. In the Raman scattering measurement with an increasing temperature, lattice vibrations of the transparent ceramic phosphor decrease due to its more perfect crystal structure and symmetry. Thus, low phonon generation is possible at high temperature. Optical properties of the transparent ceramic phosphor have broader excitation spectra due to a large internal reflection. There is a wide emission band from the green to yellow region, and the red color emission between 610 nm and 640 nm is also observed. The red-yellow phosphor optical characteristics enable a high Color Rendering Index (CRI) in combination with blue emitting LED or LD. Due to its good thermal properties of low phonon generation at high temperature and a wide emission range for high CRI characteristics, the transparent ceramic phosphor is shown to be a good candidate for high power solid state white lighting.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.243.1-243.1
• /
• 2016

Recently, many groups have attempted to fabricate 3-dimensional (3D) structures of GaN such as pyramids, rods, stripes and annulars. Since quantum structures on non-polar and semi-polar planes of 3D structures have less influence of internal electric filed, multi quantum wells (MQWs) formed on those planes have high quantum efficiency. Especially, pyramidal and annular structures consist of various crystal planes with different emission wavelength, providing a possibillity of phosphor-free white light emtting diodes (WLEDs).[1] However, it still has problem to obtain high color rendering index (CRI) number because of narrow-band emission and poor indium composition caused by the formation of few number of facets during metal-organic chemical vapor deposition growth.[2] If we can fabricate 3D structure having more various facets, we can make broad-band emittied WLEDs and improve CRI number. In this study, we suggest a simple method to fabricate 3D structures having various facet and containing high indium composition by means of a combination of metal-organic chemical vapor deposition and wet chemical etching techniques.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.5
• /
• pp.9-19
• /
• 2010

Every car manufacturer desires to reduce the new car development time spent in improving the safety, NVH, lightweight, reliability and environment friendly features of the car. Other considerations such as planning, exterior and interior styling, packaging, color, and material selection increase the complexity of the car design process. This paper proposes a personal DDP (Digital Design Process) to utilize the engineering analysis and design/styling software for car design. DDP can be efficiently used by a team of car research center or a studio with small number of engineers, helping ordinary engineers becoming ambidextrous in design as well as engineering applications. The concept model starts from idea sketch, rendering, and 3D surface model with CAS (Computer Aided Styling) to the final safety estimation by using proposed DDP based on engineering technology (CAD, CAE). The concept model proposed a hydrogen fuel cell sports coupe which could be available within next 10 years. The proposed DDP can not only reduce the new car development time but also be adapted into designing of varied products such as aircraft, yacht, electrical equipment and sports gear.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.1
• /
• pp.20-26
• /
• 2002

HID(high intensity discharge)lamps include high pressure mercury lamp, high pressure sodium lamp and metal halide lamp. Metal halide lamps have been considered to be one of the most erective light sources. These lamps have good efficiency, good color rendering and good focusing capability. The objective of this research is to alum on the metal halide lamp(MH70W) by the developed electronic ballast with free voltage input(AC 100∼277V). The developed electronic ballast consists of a free voltage input converter, a flyback converter ＆ half-bridge inverter, ignitor ＆ protector and control1er. Experimental results show that developed electronic ballast turns on the metal halide lamp(MH70W) with free voltage input(AC 100∼277V) very well.

• Korean Institute of Interior Design Journal
• /
• v.25 no.6
• /
• pp.139-148
• /
• 2016

Chronic patients and staffs in healthcare facilities cannot avoid long-term stays indoors. Therefore, they need to get adequate amounts of sunlight to prevent diseases caused by vitamin D deficiency. This is a case study on the advanced daylighting systems installed to healthcare facilities for therapeutic environments as serving natural light therapy and a pleasant atmosphere. This paper shows daylighting devices that overcome the structural limits of architectural design solutions for inducing natural light. This study presents appropriate daylighting technologies to the purpose and types of healthcare facilities by analyzing therapeutic environmental factors. Natural light delivered through daylighting devices help directly patients recover. In addition, it can improve healthcare providers' performance and productivity, and reduce their errors, thereby creating therapeutic environments for patients, indirectly. Excellent color rendering of solar illumination is also a powerful tool for navigation and wayfinding in the buildings, and for aesthetic treatment in dental office. Furthermore, daylighting systems are streamlined and require the least material and space to attract sunlight up to the deeper inside. But because of expensive cost, they have not yet been widespread. Though daylighting devices are typically more expensive than artificial illuminations to install, the running cost savings can compensate for the initial installation cost. With the development of technology in the future, the market price of them is expected to be formed properly.

• Journal of the Korean Society of Costume
• /
• v.41
• /
• pp.23-47
• /
• 1998

Ornaments is a province of the fashion. It usually express noble metals and jewel's adorn-ment as the symbol of status and riches for a long time. The ornament design of Jewels drawing project and a product by computer are increased development and as exertion as a realization of automation. Through the use of CAD software(Auto CAD R 13 & Jewel CAD) \circled1 A design development of the jewels in industrial society \circled2 A metals art & design on the dress and it's ornaments - Study about application of principle(liberal curve, arrangement of repeated form, gradual unity, rhythmical harmony) Although Auto CAD don't various expression of Jewels than a Jewel CAD, formative.scientific.funtional development of geometrical form is free. That is (to say), geometrical form is given much weigh in the general CAD, but Jewel CAD made concentrate software on the jewels design for the expression of liberal form. The CAD/CAM software for jewellery program is composed of main menu, icons, hotkeys. Changing form is derived from a definite point, curve elements of a drawing. \circled1 3-Dimensional \circled2 Easy and flexible \circled3 Bulit-in and self created library \circled4 From simple wire frame to full color images. As a CAD can practice all the creation activity effectively, from Design & Drafting Software to Rendering generally can present precise results. A point of view of the connection the scientist and art, this practicableness of CAD have a lot of possiblity of development. That will do much for the related fields of industry. Consequently, subjective intension of a creator & humanity with value plays role in practical application of the design.

• Journal of Korea Multimedia Society
• /
• v.11 no.5
• /
• pp.623-632
• /
• 2008

In this paper, we used the color transfer function and the opacity transfer function for the internal 3D object visualization of an image volume data. In transfer function, creating values of between boundaries generally is ambiguous. We concentrated to extract boundary features for segmenting the visual volume rendering objects. Consequently we extracted an image gradient feature in spatial domain and created a multi-dimensional transfer function according to the GPU efficient improvement. Finally using these functions we obtained a good research result as an implementing object boundary visualization of the graphic hardware based 3D texture mapping.

• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.05
• /
• pp.72-74
• /
• 1997

We have developed a 3-D image processing and display technique that include image resampling, modification of MIP, and fusion of MIP image and volumetric rendered image. This technique facilitates the visualization of the three-dimensional spatial relationship between vasculature and surrounding organs by overlapping the MIP image on the volumetric rendered image of the organ. We applied this technique to a MR brain image data to produce an MRI angiogram that is overlapped with 3-D volume rendered image of brain. MIP technique was used to visualize the vasculature of brain, and volume rendering was used to visualize the other structures of brain. The two images are fused after adjustment of contrast and brightness levels of each image in such a way that both the vasculature and brain structure are well visualized either by selecting the maximum value of each image or by assigning different color table to each image. The resultant image with this technique visualizes both the brain structure and vasculature simultaneously, allowing the physicians to inspect their relationship more easily. The presented technique will be useful for surgical planning for neurosurgery.