• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.40 no.4
• /
• pp.234-242
• /
• 2007

We examined the cause of albinism in a hatchery population of flounder in terms of environmental and nutritional factors, including the effects of light intensity (130-12,300 lux), photoperiod (12L/12D or 24L/0D), tank substrate (concrete or fiber-reinforced polymer), tank color (white or dark green) and supplement with enriched live food, and also compared the growth of normal and albino fry under both 12L/12D and 24L/0D. Further to, normalization of the skin pigmentation pattern on the ocular side has been juvestigated after rearing the albino fry for 2 years after their identification and classification and found that, light intensity did not play a critical role in the development of normal pigmentation or albinism in the flounder. By contrast, the photoperiod was a weak inducer of albinism in the flounder. Tank substrate and color also affected the hypomelanosis on the ocular side of the flounder fry. The choice and supplementation of enriched live foods could drastically reduce the incidence of albinos in hatcheries. On comparing the growth of normal and albino fry, while there was no difference between the groups under 24L/0D, the growth of the albino flounder was slower under 12L/12D. Although coloration resulting from xanthophore and melanophore, but not iridophores, occurred on the ocular side, evidence of albinism remained on the ocular side of flounders.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.26 no.1
• /
• pp.52-72
• /
• 1984

This study was performed to obtain the basic data which can be applied to the use of epoxy resin mortars. The data was based on the properties of epoxy resin mortars depending upon various mixing ratios to compare those of cement mortar. The resin which was used at this experiment was Epi-Bis type epoxy resin which is extensively being used as concrete structures. In the case of epoxy resin mortar, mixing ratios of resin to fine aggregate were 1: 2, 1: 4, 1: 6, 1: 8, 1:10, 1 :12 and 1:14, but the ratio of cement to fine aggregate in cement mortar was 1 : 2.5. The results obtained are summarized as follows; 1.When the mixing ratio was 1: 6, the highest density was 2.01 g/cm$^3$, being lower than 2.13 g/cm$^3$ of that of cement mortar. 2.According to the water absorption and water permeability test, the watertightness was shown very high at the mixing ratios of 1: 2, 1: 4 and 1: 6. But then the mixing ratio was less than 1 : 6, the watertightness considerably decreased. By this result, it was regarded that optimum mixing ratio of epoxy resin mortar for watertight structures should be richer mixing ratio than 1: 6. 3.The hardening shrinkage was large as the mixing ratio became leaner, but the values were remarkably small as compared with cement mortar. And the influence of dryness and moisture was exerted little at richer mixing ratio than 1: 6, but its effect was obvious at the lean mixing ratio, 1: 8, 1:10,1:12 and 1:14. It was confirmed that the optimum mixing ratio for concrete structures which would be influenced by the repeated dryness and moisture should be rich mixing ratio higher than 1: 6. 4.The compressive, bending and splitting tensile strenghs were observed very high, even the value at the mixing ratio of 1:14 was higher than that of cement mortar. It showed that epoxy resin mortar especially was to have high strength in bending and splitting tensile strength. Also, the initial strength within 24 hours gave rise to high value. Thus it was clear that epoxy resin was rapid hardening material. The multiple regression equations of strength were computed depending on a function of mixing ratios and curing times. 5.The elastic moduli derived from the compressive stress-strain curve were slightly smaller than the value of cement mortar, and the toughness of epoxy resin mortar was larger than that of cement mortar. 6.The impact resistance was strong compared with cement mortar at all mixing ratios. Especially, bending impact strength by the square pillar specimens was higher than the impact resistance of flat specimens or cylinderic specimens. 7.The Brinell hardness was relatively larger than that of cement mortar, but it gradually decreased with the decline of mixing ratio, and Brinell hardness at mixing ratio of 1 :14 was much the same as cement mortar. 8.The abrasion rate of epoxy resin mortar at all mixing ratio, when Losangeles abation testing machine revolved 500 times, was very low. Even mixing ratio of 1 :14 was no more than 31.41%, which was less than critical abrasion rate 40% of coarse aggregate for cement concrete. Consequently, the abrasion rate of epoxy resin mortar was superior to cement mortar, and the relation between abrasion rate and Brinell hardness was highly significant as exponential curve. 9.The highest bond strength of epoxy resin mortar was 12.9 kg/cm$^2$ at the mixing ratio of 1:2. The failure of bonded flat steel specimens occurred on the part of epoxy resin mortar at the mixing ratio of 1: 2 and 1: 4, and that of bonded cement concrete specimens was fond on the part of combained concrete at the mixing ratio of 1 : 2 ,1: 4 and 1: 6. It was confirmed that the optimum mixing ratio for bonding of steel plate, and of cement concrete should be rich mixing ratio above 1 : 4 and 1 : 6 respectively. 10.The variations of color tone by heating began to take place at about 60˚C, and the ultimate change occurred at 120˚C. The compressive, bending and splitting tensile strengths increased with rising temperature up to 80˚ C, but these rapidly decreased when temperature was above 800 C. Accordingly, it was evident that the resistance temperature of epoxy resin mortar was about 80˚C which was generally considered lower than that of the other concrete materials. But it is likely that there is no problem in epoxy resin mortar when used for unnecessary materials of high temperature resistance. The multiple regression equations of strength were computed depending on a function of mixing ratios and heating temperatures. 11.The susceptibility to chemical attack of cement mortar was easily affected by inorganic and organic acid. and that of epoxy resin mortar with mixing ratio of 1: 4 was of great resistance. On the other hand, when mixing ratio was lower than 1 : 8 epoxy resin mortar had very poor resistance, especially being poor resistant to organicacid. Therefore, for the structures requiring chemical resistance optimum mixing of epoxy resin mortar should be rich mixing ratio higher than 1: 4.

• Archives of design research
• /
• v.17 no.4
• /
• pp.233-240
• /
• 2004

Living in the modern age with well-developed scientific technologies, all of us are enjoying convenient lives because of 'energy'. Korea, poor in resources, is importing a large portion of its energy sources from abroad but energy consumption shows an upward tendency due to the continuing economic growth and the improvement of living conditions. The atomic energy is considered a self-reliant, alternative energy source like our country. However, it is necessary to educate the people on and publicize atomic power generation in the face of the widespread negative recognition that the atomic power plant is a hazardous facility. The study approaches to these matters with a human-friendly and environment-friendly coloring plan in the perspective of environment coloring plan. The study aims to minimize negative images of the atomic power, while highlighting its friendly and positive images so as to enhance the confidence of the people on the atomic power and to create a clean image for the atomic power. For this goal, the study examined and analyzed cases of Japanese nuclear power plants and domestic nuclear power plants, and also carried out an on-site survey in the sites in which nuclear power plants would be constructed to extract concrete colors through the analyses of their natural environment and actual conditions. The study also carried out a survey of residents in the regions to induce their participation, and reflected the survey results to the coloring plan. The study is expected to create a stable and friendly image of the nuclear power plant through materializing its environment-friendly image and remove negative recognition that the people have on the nuclear power plant. It also attempted an external environment-coloring plan a s a strategic means for positive publicity and through this, is expected to ultimately contribute to the creation of the new images of nuclear ower plants.

• Archives of design research
• /
• v.20 no.1 s.69
• /
• pp.5-20
• /
• 2007

The aim of this research is to find out the flows of mega-trends and design trends by analyzing the factors that influence trend and design trends in the late 20th century. Moreover, it is to forecast and recommend design color trends by evaluating color trends in design trends for the near future. Secondary and primary research were used in parallel. In the late 20th century, mega-trends were analyzed from secondary research based on PEST. Design trends were analyzed from case studies in fashion, space, product and visual design. On this basis, design color trends were analyzed. Also, color trends were forecast for the near future. The results are as follows. Firstly, the main trends in the late 20th century were 'female thinking', 'back to the nature' and 'heaven of peace'. Second, main design trends in the 1970s were modernism, post-modernism and high-tech. In the 1980s, with those of the 1970s, ecology was introduced In the late 1980s. In the 1990s, modernism rose again and ecology had an influence. The trends of 'female thinking' and 'back to the nature' controled the design in the early 2000s. Third, design colors in the late 20th century changed from Red to Purple Blue. Tones changed from 'grayish' to 'dull' Finally, it was forecast that Purple Blue, Yellow Red and Green colors with 'grayish', 'dull' and 'deep' tones were going to be used mainly in the near future. Also, achromatic colors with female and warm nuances would be reflected in design parts. This research will be very useful in that it has built a concrete database reflected on design trends forecasting in the near future by organizing academically a methodology to identify trends reflected on design and identifying relation between mega-trends and design trends based on analyzing factors that influence trend.

• Journal of the Korean Home Economics Association
• /
• v.40 no.8
• /
• pp.183-190
• /
• 2002

This study was aimed at investigating the satisfaction in relation to clothing design and size-fit for nurse uniform in Korea. The subjects were 986 female nurses working in 12 hospitals selected by convenience sampling. The data were collected by questionnaires. Using SPSS package, frequency, percentage, t-test, ANOVA and SNK test were conducted. The results were divided into 2 categories as fellows; 1) Results of the satisfaction with the size-fit and size system of the nurse uniforms : Nurses satisfied at the individual size-fit system than ready-made size system. There was a considerable difference of the satisfaction with the size-fit depending on age and clinical career. And more than half of nurses were needed the concrete and precise size system. 2) Results of the actual design condition and clothing satisfaction : Nurses wore two-piece pants suits more than classical designed one-piece style. The princess-line, convertible collar and yoke design were preferred for nurse uniform with the high satisfaction. 41.6 percent of respondents used the cap obligatory and the white color and a patterned textile were generally used. The used fabrics were only polyester and cotton/polyester mixed spinning.

• Fashion & Textile Research Journal
• /
• v.14 no.6
• /
• pp.906-917
• /
• 2012

The purpose of this study is to examine the characteristics of expression and their effects of New painting in fashion illustration since 1990s. This study is focused on searching for the development in expressional techniques of the fashion illustration on the basis of various techniques of New painting. New painting as a trend of new expressionism in America was developed in opposition to the minimalism in the 1980s when the discussion of the post-modernism was most widely. The artists of New painting attempted to resurrect figure through the representation of figure and concrete image, rich in color and strong in image. They also expressed the realistic scene of life with the various kind of medium, materials and styles and appropriation of image from mass media and popular culture. The representation of fashion figure and image through the various kind of painting medium, techniques and styles can express the realistic and sensitive image and increase the communication ability in fashion illustration. It could also deliver the fashion message more clearly through the appropriation of image. These findings indicate that fashion illustrations accept variety by interacting with fine arts and expand the scope of expression.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2005.05a
• /
• pp.125-131
• /
• 2005

Recently, to improve condition car park, using surface finishing material for variety color and property epoxy resin, urethane, cement mixed resin mortar or polymeric resin, and so on. However, it is frequent noise and wear out of tier and waterproofing materials, when the car slip or stop in car park, To minimize these cases, It is necessary that reduction of repair cost through performance long term durability of surface finishing material, improvement inside condition such as reduce dirty and car accident and ensurance the expected life of concrete slab in car park. Especially, we have not any tech for quality control, construction tech, production technology for car park surface materials, that's why park slab is not safety and suffer a loss. For this problems, this paper is to test surface finishing materials and as that result, suggest quality standard in the car park.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.24 no.1
• /
• pp.1-14
• /
• 1996

The purpose of this study was an analysis of the elementary school child's attitude and dangerous factors of play apparatuses n elementary schools. The results were summarized as follows; 1. 53.0% of the reply child thought that play apparatuses were dangerous, and 41.0% of the total reply had experienced accidents by apparatuses, the child under 10 had experienced the accidents manytimes. 2. The types of injuries most frequently occurred are falls from play apparatuses, and part of the body most frequently injured parts of the body are arms and legs. 3. The danger of fall in play apparatuses that is over 3M amounted 19.6%, it asked safety of bottom materials. 4. Destructed play apparatuses reached up to 20.0%, and rusted or decomposed apparatuses reached to 28.4%. 5. The distance of each apparatus were very close ; it was within 0.3~1.5M, which was 24.9%, it was very dangerous factor. 6. The most frequent hazards of educational play apparatuses are ; - inappropriate size of apparatuses(height, gap, thick etc.)- inappropriate shape and finished state(bad welding and cutting, projection part etc.)- unsuitable use of bottom material in playground and safety color.- insufficient use zone.-inappropriate maintenance and inspection(endurance passage, erosin of iron-ware and wooden ware, projection of foundation concrete)

• Journal of the Korean Institute of Rural Architecture
• /
• v.13 no.4
• /
• pp.17-24
• /
• 2011

This research is according to the a future-oriented strategy, low-carbon green growth, and it is a basic research for dissemination of rural housing standard plan. Through the survey of plans use, we look at ways to rural housing standard plan use and then needed to establish measures for this. Looking at the type of used plans, we can find several points. One of them, 19 kinds of rural housing standard plans were used among the 61 total cases. Almost all change the plan, the reasons is different for the condition of the land, such as site conditions, family members, personal preferences, house color or material. A few cases have been constructed as rural housing standard plans, but rural housing standard plans are important data for the rural resident to determine plans, and it has an important role in the rural housing design process. Common features of the many rural houses is concrete structure, two stories, and construction period is two to three months. Land area is $300m^2$ to $600m^2$, building area is $71m^2-110m^2$. Heating system is an oil boiler.

• Journal of the Korean Society of Costume
• /
• v.38
• /
• pp.143-157
• /
• 1998

This research is to aim at presenting arrangement of colors, visual and symbolic through combined coupling ofI-Ging and Sackdong. This combined couplings is attempted to be approached by the following 4 conceptual steps :ⅰ) Is it appropriate to even try to coupleI-Ging with Sackdong\ulcorner ⅱ) Is the basic structure of Kwai an object of stripe colorizing\ulcorner ⅲ) What are the fundamental colors for this purpose\ulcorner ⅳ)combined of Kwai and the fundamental colors. Theoretical background for this study is as follows.ⅰ) Color accord and arrangements of existing Sackdong. ⅱ) An attempt to coupleI-Ging with Sackdong The purpose of this research is to expand concrete concept of Sackdong, which is to be utilized not only in costume design, but in the whole realm of design, by presenting feasible application of stripe coloredI-Ging. The summary of conclusion of this research is as follows. A. Is this aforementioned attempt academic\ulcorner B. Standardization of stripe-coloring is essential. Furthurmore we can conclued that the under-standing ofI-Ging and its basic philosophical background and the fundamental mechanism of colors in traditional costumes is necessary condition for standardization of Kwai. Along this path, however, conditions to be satisfied and priorities to be given depend upon the decision of an individual or a group. In my view, sripe-colorizing of 64 Kwais ofI-Ging followed by intuitive matching of colors with the in-terpretation of Kwais seems to be the most appropriate solution.