• Journal of the Society of Naval Architects of Korea
• /
• v.48 no.3
• /
• pp.246-253
• /
• 2011

This paper presents estimation of deterministic damage extents and locations due to collision and grounding which are defined by ABS guideline and DNV ship rules. It is noted that the overall extents of damages from DNV are larger than those from ABS. Nonlinear FEAs are carried out to predict residual longitudinal strength of hull girder with asymmetric severe damages. The accuracy of the applied FEA procedure is proved by comparing FEA result with test result of a 1/3-scaled frigate. The investigated vessels are a VLCC and a large-sized bulker for which evenly distributed heeling angles from $0^{\circ}$(sagging) to $180^{\circ}$(hogging) by $30^{\circ}$ due to damage-induced flooding are taken into account. The reduction ratios of the ultimate residual strength for the damaged cases to those for the intact sagging case are shown. It is proved that the grounding damage case under DNV assumption reveals most critical the residual strength. The design formulas are presented to assure minimum residual ultimate moment after damage.

• Journal of the Korean Ceramic Society
• /
• v.34 no.11
• /
• pp.1121-1128
• /
• 1997

In this study, the Ar plasma treatment was used to improve the surface roughness of Poly-Si1-xGex thin film deposited by RTCVD. The surface roughness and the resistivity of Si1-xGex thin film were investigated with variation of Ar plasma treatment parameters (electrode distance, working pressure, time, substrate temperature and R.F power). When the Ar plasma treatment was used, the cluster size decreased by the surface etching effect due to the increasing surface collision energy of particles (ion, neutral atom) in plasma under the conditions of decreasing electrode distance and increasing pressure, time, temperature, and R. F power. Although the surface roughness value decreased by the reduction of the cluster size due to surface etching effect, however, the resistivity increased. This may be due to the surface damage caused by the increasing surface collision energy. It was concluded that the surface roughness could be improved by the Ar plasma treatment, while the resistivity was increased by the surface damage on the substrate.

• Journal of the Korean Society for Precision Engineering
• /
• v.33 no.12
• /
• pp.1039-1045
• /
• 2016

We investigated the protection capability of a plate against high speed projectiles demonstrating collision and penetration behaviors by finite element analysis. The element erosion method was used for penetration analysis, which showed that the speed of the projectile was slightly reduced by the collision with the protection plate. Protection capability was measured by the projectile's attitude angle change because the damage of our tanks by projectiles was also dependent on the projectile-tank collision angle. When the length of the protection plate was sufficiently long, the projectile was severely deformed and incapacitated. In the case of a small plate, the projectile was deformed only in the collision region. Thus, projection capability was investigated by the change of attitude angle. The effect of collision angle, velocity, and length of the plate on the rotational and vertical velocities of the projectile was investigated.

• International Journal of Concrete Structures and Materials
• /
• v.8 no.1
• /
• pp.43-59
• /
• 2014

Many bridges are subject to lateral damage for their girders due to impact by over-height vehicles collision. In this study, the optimum configurations of carbon fiber reinforced polymers (CFRP) laminates were investigated to repair the laterally damaged prestressed concrete (PS) bridge girders. Experimental and analytical investigations were conducted to study the flexural behavior of 13 half-scale AASHTO type II PS girders under both static and fatigue loading. Lateral impact damage due to vehicle collision was simulated by sawing through the concrete of the bottom flange and slicing through one of the prestressing strands. The damaged concrete was repaired and CFRP systems (longitudinal soffit laminates and evenly spaced transverse U-wraps) were applied to restore the original flexural capacity and mitigate debonding of soffit CFRP longitudinal laminates. In addition to the static load tests for ten girders, three more girders were tested under fatigue loading cycles to investigate the behavior under simulated traffic conditions. Measurements of the applied load, the deflection at five different locations, strains along the cross-section height at mid-span, and multiple strains longitudinally along the bottom soffit were recorded. The study investigated and recommended the proper CFRP repair design in terms of the CFRP longitudinal layers and U-wrapping spacing to obtain flexural capacity improvement and desired failure modes for the repaired girders. Test results showed that with proper detailing, CFRP systems can be designed to restore the lost flexural capacity, sustain the fatigue load cycles, and maintain the desired failure mode.

• Journal of the Korean Society of Safety
• /
• v.23 no.2
• /
• pp.72-80
• /
• 2008

In a case of an automobile collision, vehicle damage and injury of the driver and the passenger occur. The scale of the collision which is effected by the extent of vehicle damage and the injury of the passenger, depends on the delta-V. Based on the photograph interpretation o the actual case of accidents in the Seoul and the Incheon area, this study measured the depth of crush and calculated the delta-V. Through verifying the correlation of the depth of crush and the change of velocity, relative equation was evaluated and compared with the prior study results to prove that they are almost identical. Thus, the depth of crush can be used as an index of the degree of impact, which can be utilized as the change of velocity to evaluate the level of injury done to the passengers. However, the period of hospitalization and diagnostics claimed by the injured proves to have no correlation with the delta-V and the extent of vehicle damage, this is due to the non-objective way of diagnosis and the anamnesis of the injured. This study established the absolute limit harmlessness and the choosing limit harmlessness, allowing the appraisal for Yes or No of the injury or the harmlessness based on the prior studies. Moreover, utilizing the relative equation formed between the depth of crush and the delta-V, each case of collision was compared and evaluated in comparison to the limit harmlessness to prove that the 90.4% of the so-called 'claiming-to-be-injured' were exaggerating or fabricating.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.49 no.1
• /
• pp.29-39
• /
• 2013

Fishing vessels have been causing more than 70% of marine casualty in Korea. As a view of the occurring number of marine casualty, it is obvious for fishing vessel to account for the absolute high portion of that in comparison with the non-fishing vessels. That is a natural outcome because fishing vessels have occupied more than 90% of all registered Korean vessels. If we consider it not occurring number, but occurring ratio, we could find out that fishing vessels accounted for 5 times lower than non-fishing vessels in marine casualties. Nevertheless, fishing vessels have not immunity from responsibility for marine casualties at all, because the tendency of it in fishing vessel has been dominating the whole marine casualties in Korea. So for reduction of them, it is indispensable to decrease the casualties of fishing vessel. In this study, the authors tried to carry out many items of them to compare the occurring number with the occurring ratio, and dealt with the casualties of collision and machine damage in detail, because those have not only been occurring most frequently in casualties in Korea, but also led to the death and injury of lives. To reduce the collision and the machine damage, the operator have to keep the watch more strictly and check and keep the machine in good order. And it is necessary for the operator to take more education and training intended to decrease those systematically and continuously, especially for the crews of fishing vessels.

• Journal of the Society of Naval Architects of Korea
• /
• v.57 no.4
• /
• pp.182-190
• /
• 2020

This study reports a series of drop impact tests performed to generate denting damages on stiffened plates and their residual ultimate strength tests under axial compression. The models were fabricated of general structural steel, and each model has six longitudinal stiffeners and two transverse frames. Among six fabricated models, four were damaged, and two were left intact for reference. To investigate the effects of collision velocity and impact location on the extent of damage, the drop height and the impact location were changed in each impact test. After performing the collision tests, the ultimate axial compression tests were conducted to investigate the residual strengths of the damaged stiffened plates. Finite element analyses were also carried out using a commercial package Abaqus/Explicit. The material properties obtained from a quasi-static tensile tests were used, and the strain-rate sensitivity was considered. After importing the collision simulation results, the ultimate strength calculations were carried out and their results were compared with the test data for the validation of the finite element analysis method.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.6
• /
• pp.56-64
• /
• 2016

Damage of sea-crossing bridge by ship collision is related to estimate frequencies of overloading due to impact, and bridge accordingly must be designed to satisfy related acceptance criteria. Another important aspect is the management on increment of collision risk during the service period. In this study, related plan, main span length, air draft clearance and collision risk are analyzed for the interim assessment of Incheon Bridge focusing on the ship collision problem. In particular, for the increment of collision risk, the optimized navigation speed is proposed by reviewing the research findings and navigation guidelines etc. as a temporary expedient. Also basic procedure for reasonable prediction of target vessel and passage is established and probabilistic prediction method to embrace the uncertainty of the prediction is proposed as a fundamental solution. It is necessary to conduct further research on collision risk management and promptly carry out interim assessments of other marine bridges.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.5
• /
• pp.530-537
• /
• 2016

This study investigates frontal crashes, analyzes the driver's action related to the change of the collision direction and determines the severity of (bodily injury). This study was conducted from August, 2013, to January, 2014, and the data for the car damage and human body damage were collected by emergency medical teams. In terms of data collection, we collected the accident vehicle, crash direction, body damage, etc., based on the Korea In-depth Accident Study (KIDAS) and Injury Severity Score (ISS). We used Minitab 17 and SPSS 22.0 to do the frequency analysis and ANOVA. In the analysis results, the prevalence of frontal collisions was 55.8% and mostly occurred in the 12 o'clock direction. In the analysis of the frontal crash direction according to age, the average ages for the 11, 12 and 1 o'clock directions were $46.46{\pm}13.47$, $44.43{\pm}13.40$ and $52.46{\pm}12.04$, respectively, so the older age drivers had a high probability of the accident occurring in the 1 o'clock direction. In the analysis of men's frontal collision direction according to age, the average ages in the 11, 12 and 1 o'clock directions were $47.10{\pm}13.88$, $45.24{\pm}13.78$ and $55.73{\pm}13.38$, respectively, so older aged men had a high probability of having collisions in the 1 o'clock direction. However, the statistical analysis of the frontal crash direction according to age in women didn't show any meaningful trend. When comparing the ISS according to age of the men and women in the collision direction, the men were less likely to have a 12 o'clock collision when $ISS{\geq}9$ and more likely to have a 1 o'clock collision when ISS<9. As a result, frontal crashes are more likely to occur in the 12 o'clock direction and the ISS decreases because the likelihood of frontal crashes in the 1 o'clock direction increases with increasing age. Therefore, when men recognize that they are heading for a 12 o'clock direction collision, they try to steer to the left to reduce the body damage.

• Proceedings of the KSR Conference
• /
• 2001.10a
• /
• pp.217-222
• /
• 2001

The best method to evaluate crashworthiness of a trainset as a whole is to analyse one dimensional dynamic model composed of nonlinear dampers, springs and bars, and masses. In this study, crashworthiness of KHST was evaluated by analysing a nonlinear spring/bar-damper-mass model. The numerical results show that the KHST can easily absorb kinetic energy at lower impact force and acceleration in a heavy collision, when compared with KTX. Also, the KHST can be protected from any damage in its carbody and components except the prepared energy absorbing tube in a light collision, like a traint-to-train accident at speed under 8 kph. However, the KTX can be much damaged in the a light collision because there is no energy absorbing tube.