• Journal of Korean Society of Transportation
• /
• v.23 no.6 s.84
• /
• pp.103-113
• /
• 2005

A pedestrian accident is generally less fully understood than the 'typical' car-to-car collision. For this reason, the analysis of the pedestrian accident is, in many respects, more complicated and demanding. The purpose of this study is to identify clearly the impact point that is the main subject of struggle in pedestrian accidents. In order to develop the model, it is very significant to classify actual accident data including impact velocity. vehicle damage and injury scale of pedestrian. These data were collected from three local branches of RTSA(Road Traffic Safely Authority). The number of collected data were 34 cases and 61.7% of them were fatal accidents. In consequence of analyzing the data by statistical method, it revealed that there is correlation between impact velocity and throw distance. It, also shows that the impact velocity has strong linear correlation to vehicle damage and injury scale. Consequently, reconstruction analysis models of pedestrian accidents considering in local circumstances(such as the physical characteristics of pedestrians and vehicles) was developed However. it is difficult to apply the result of this study to all sorts of pedestrian accidents, because the actual accident data which were used to develop the model were limited. To overcome this limitation, it is necessary to develop an analysis model applicable to diverse circumstances with a wide range of pedestrian accident data on a national basis.

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.10 no.2
• /
• pp.94-99
• /
• 2011

Purpose: As the number of people enjoying skiing and snowboarding which are two popular winter sports has been increasing, wearing helmet during doing these sports has been needed for safety. The rates of head or face injury have decreased after using helmet. However the effect that wearing helmet has on cervical damage is not yet to be known. So through this research we intend to be helpful in developing effective program and safety equipment. Materials and Methods: During two seasons from December 2009 to march 2011, cased 658 cervical injuries within 14538 admittance in medical center of major resort due to skiing and snow-boarding injuries. For survey and research model, one year before the research year conducted a pilot study. Admittance were 432 male and 226 female, advanced 273 and 385 novice. We divided them into two groups depending on wearing helmet, measured cervical damage ratio and injury mechanism, and researched the severity of damage and diagnosed injury. Each group used SPSS 12.0 (SPSS Inc., Chicago, IL, USA) to process data statistically. Results: The number of patients was 312 in skier and 346 in snow boarder. Patients wearing helmet were 146 in skier and 127 in snow boarder. Classification of each injuries were confirmed as 292 cases of simple sprain, 359 bruising, 6 cervical fractures and 1 case of dislocation. Classification of injury mechanisms were 287 of human collision, 212 material collision, 108 of slip down by oneself, 39 of falling and 12 cases of etc. In cases wearing helmet ski 78/ snow board 70 were simple sprain, ski 64/ snowboard 68 were shown as bruising, ski 1/ snow board 2 had cervical fracture or dislocation. The ratio of cervical sprain increased in cases of wearing helmet compared to non-wearing cases and there was a statistical significance (p<0.001). The ratio of cervical contusion increased significantly in non-wearing helmet user (p<0.05). However, there was no significant increase in fracture and dislocation compared between helmet user and non-user (p> 0.05). Conclusion: In this study, wearing helmet had no relation to additional cervical injury occurrence or severity among skiers and snow boarders. The ratio of cervical sprain increased significantly in helmet user with person to person accident. However, the cervical contusion decreased. On this ground, further biomechanical studies are required and modified helmet will be necessary.

• The Korean Journal of Air & Space Law and Policy
• /
• v.24 no.1
• /
• pp.35-58
• /
• 2009

A treaty that governs the compensation on damage caused by aircraft to the third parties on surface was first adopted in Rome in 1933, but without support from the international aviation community it was replaced by another convention adopted again in Rome in 1952. Despite the increase of the compensation amount and some improvements to the old version, the Rome Convention 1952 with 49 State parties as of today is not considered universally accepted. Neither is the Montreal Protocol 1978 amending the Rome Convention 1952, with only 12 State parties excluding major aviation powers like USA, Japan, UK, and Germany. Consequently, it is mostly the local laws that apply to the compensation case of surface damage caused by the aircraft, contrary to the intention of those countries and people who involved themselves in the drafting of the early conventions on surface damage. The terrorist attacks 9/11 proved that even the strongest power in the world like the USA cannot with ease bear all the damages done to the third parties by the terrorist acts involving aircraft. Accordingly as a matter of urgency, the International Civil Aviation Organization(ICAO) picked up the matter and have it considered among member States for a few years through its Legal Committee before proposing for adoption as a new treaty in the Diplomatic Conference held in Montreal, Canada 20 April to 2 May 2009. Accordingly, two treaties based on the drafts of the Legal Committee were adopted in Montreal by consensus, one on the compensation for general risk damage caused by aircraft, the other one on compensation for damage from acts of unlawful interference involving aircraft. Both Conventions improved the old Convention/Protocol in many aspects. Deleting 'surface' in defining the damage to the third parties in the title and contents of the Conventions is the first improvement because the third party damage is not necessarily limited to surface on the soil and sea of the Earth. Thus Mid-air collision is now the new scope of application. Increasing compensation limit in big gallop is another improvement, so is the inclusion of the mental injury accompanied by bodily injury as the damage to be compensated. In fact, jurisprudence in recent years for cases of passengers in aircraft accident holds aircraft operators to be liable to such mental injuries. However, "Terror Convention" involving unlawful interference of aircraft has some unique provisions of innovation and others. While establishing the International Civil Aviation Compensation Fund to supplement, when necessary, the damages that exceed the limit to be covered by aircraft operators through insurance taking is an innovation, leaving the fate of the Convention to a State Party, implying in fact the USA, is harming its universality. Furthermore, taking into account the fact that the damage incurred by the terrorist acts, where ever it takes place targeting whichever sector or industry, are the domain of the State responsibility, imposing the burden of compensation resulting from terrorist acts in the air industry on the aircraft operators and passengers/shippers is a source of serious concern for the prospect of the Convention. This is more so when the risks of terrorist acts normally aimed at a few countries because of current international political situation are spread out to many innocent countries without quid pro quo.

• Journal of the Korea Concrete Institute
• /
• v.22 no.4
• /
• pp.535-546
• /
• 2010

Recently, the probability of collision accident between vehicles or vessels and infrastructures are increasing at alarming rate. Particularly, collision impact load can be detrimental to sub-structures such as piers and columns. The damaged pier from an impact load of a vehicle or a vessel can lead to member damages, which make the member more vulnerable to impact load due to other accidents which. In extreme case, may cause structural collapse. Therefore, in this study, the vehicle impact load on concrete compression member was considered to assess the quantitative design resistance capacity to improve, the existing design method and to setup the new damage assessment method. The case study was carried out using the LS-DYNA, an explicit finite element analysis program. The parameters for the case study were cross-section variation of pier, impact load angle, permanent axial load and axial load ratio, concrete strength, longitudinal and lateral rebar ratios, and slenderness ratio. Using the analysis results, the performance based resistance capacity evaluation method for impact load using satisfaction curve was developed using Bayesian probabilistic method, which can be applied to reinforced concrete column design for impact loads.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.7
• /
• pp.843-856
• /
• 2023

The global surge in maritime traffic has resulted in an increased number of ship collisions, leading to significant economic, environmental, physical, and human damage. The causes of these maritime accidents are multifaceted, often arising from a combination of crew judgment errors, negligence, complexity of navigation routes, weather conditions, and technical deficiencies in the vessels. Given the intricate nuances and contextual information inherent in each incident, a methodology capable of deeply understanding the semantics and context of sentences is imperative. Accordingly, this study utilized the SentenceBERT model to analyze maritime safety tribunal decisions over the last 20 years in the Busan Sea area, which encapsulated data on ship collision incidents. The analysis revealed important keywords potentially responsible for these incidents. Cluster analysis based on the frequency of specific keyword appearances was conducted and visualized. This information can serve as foundational data for the preemptive identification of accident causes and the development of strategies for collision prevention and response.

• Journal of Fisheries and Marine Sciences Education
• /
• v.14 no.2
• /
• pp.149-160
• /
• 2002

I have been analyzed the marine accidents during 10years(1992~2001) based on the maritime inquire court decision, the results were as follows: 1. The rate of accident occuring were showed fishing boat(69.9%), freighter(12.3%), tanker(4.3%), tug boat(3.8%), passenger boat(2.1%) by the usage. 2. The marine accident had been showed operational fault(67.3%), mishandling of engine equipment(21.7%), meteorological condition, etc(11%) by the reason, most accidents had been occured by the operator fault and rack of experience. 3. The marine accidents had been showed damage of hull and engine(27.5%), collision(24%), foundering(11.3%), fire(3.9%), agrounding(10%), by the kind of accidents. 4. The accidents had been occured (74.6%) at the coastal sea, harbour and (25.4%) at the open sea by the sectors. The accidents of the vessel less than 500ton were much increased (54.3%) also, The accidents were much occured at the time between 0400~0800 hours by the time.

• Journal of Fisheries and Marine Sciences Education
• /
• v.29 no.3
• /
• pp.857-868
• /
• 2017

The basic safety training for fisheries is being conducted to cope with an emergency situation and prevent the maritime accidents. A new joined person must be educated the safety training and a refresher must be completed the refresher training course every 5 year in according to the STCW-F and seafarers' Act. In order to achieve the objectives of marine safety training, it is necessary to distinguish the trainees by ship's type and the courses should be implemented in consideration of safety equipment of fishing vessels. However, since the classification criteria of seafarers' Act are unclear, the officer of fishing vessels which is over G/T 25 tons has been trained through the same course and curriculum for merchant ship's seafarers. About 80 % of domestically registered fishing vessels are small size ships(less than 100 tons) and there is not many safety equipment required by law. In case of marine accidents such as collision, the small vessel losses its buoyancy and stability caused by damage of hull. despite fisheries fall into the sea during fishing work in bad weather on the deck, there was no safety equipment by law. So fisheries must be trained by a safety training course suitable for fishing vessel. The purpose of this study is to develope the suitable course for fisheries by analysis current curriculum and rules. so suggested the basic safety training course for fisheries and institutional improvement.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.12 no.2
• /
• pp.58-65
• /
• 2016

Since, in case of high energy piping, steam jets ejected from the rupture zone may cause damage to nearby structure, it is necessary to design it into consideration of nuclear power plant design. For the existing nuclear power plants, the ANSI / ANS 58.2 technical standard for high-energy pipe rupture was used. However, the US Nuclear Regulatory Commission (USNRC) and academia recently have pointed out the non-conservativeness of existing high energy pipe fracture evaluation methods. Therefore, it is necessary to develop a highly reliable evaluation methodology to evaluate the behavior of steam jet ejected during high energy pipe rupture and the effect of steam jet on peripheral devices and structures. In this study, we develop a method for analyzing the impact load of a jet by high energy pipe rupture, and plan to carry out an experiment to verify the evaluation methodology. In this paper, the basic data required for the design of the jet impact load experiment equipment under construction, 1) the load change according to the jet distance, 2) the load change according to the jet collision angle, 3) the load variation according to structure diameter, and 4) the load variation depending on the jet impact position, are numerically obtained using the developed steam jet analysis technique.

• Journal of Korean Medical classics
• /
• v.26 no.2
• /
• pp.133-174
• /
• 2013

Objective : Malaria(瘧疾) is a disease that's main symptom is paroxysm - a cyclical occurrence of sudden coldness followed by rigor and then fever. Since the introduction of the cause and mechanism of malaria(瘧疾) in the "Suwen(素問)", including Cold malaria(寒瘧), Warm malaria(溫瘧), Heat malaria(癉瘧) and Wind malaria(風瘧), there has been over 20 different kinds of malaria, each of which are introduced in multiple medical texts. Method : Through comparison between "Suwen(素問)" and other medical texts, the categories, causes and mechanisms of malaria can be analysed and organized to overview the whole feature of it. Results & Conclusion : External pathogens of malaria(瘧疾) are wind(風), cold(寒), summerheat (暑), dampness(濕), miasmic toxin(瘴), pestilence(疫), ghost(鬼). Internal pathogens of malaria(瘧疾) are dietary irregularities(飮食不節), overexertion and fatigue(勞倦), phlegm(痰), seven emotion(七情). Malaria can be categorized into four groups according to the pathological mechanism that leads to paroxysm. They are latency of disease(伏氣), external contraction(外感), internal damage(內傷), and combination of disease(合病). Malaria-Paroxysm(瘧疾發作) occurs when the three following factors collide strongly : defense qi(衛氣), latent qi(伏邪) and external pathogen(新邪). When collision of the three factors takes place in the interior(裏), the body experiences chills. When it takes place in the exterior(表), the body experiences fever. The cyclical occurrence of Malaria-Paroxysm follows the circulation of defense qi.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.26 no.2
• /
• pp.293-307
• /
• 1998

This study has been divided into two parts, 1) literature review and 2) a case study. Based on literature review and case studies found in Korea and abroad, this study aimed at classifying wildlife passages and establishing their development procedures in order to establish a theoretical ground for the development of wildlife passage as a way to link habitats that have been fragmented by the construction of roads and other developments. The results of the literature review are as follows : 1) Impact of road construction on surrounding ecological environment is found in various aspects. Along with damage of habitats as direct impact, decrease of biodiversity and simplification of species due to limited breeding and movement are cited as possible indirect impact. 2) In order to lessen the impact generated from fragmented habitats, various types of wildlife passage are being developed in Europe and are showing positive results. 3) In Korea, interests on animal passages have been rising recently. The ministry of Environment and local authorities are establishing development plans for the passages. However, practical materials on the usefulness of adoped methods are not available.4) In order to create an effective wildlife passage, decisions have to be made first on basic factors of planning and designing such as ecosystem rehabilitation methods and surveys on wildlife movement routes and habitat environment. Based on this, in a planning and designing stage, the location and type of a passage, size and measures to attract animals and prevent a collision need to be finalized. This should be followed by a series of process of maintenance, management and monitoring after the development. Based on the results of a theoretical study to develop an wildlife passage, Part 2 of this study deals with the results of an experiment through a specific planning and design that includes a process of ecological surveys, site selection, type selection, ecosystem infrastructure, planting design and construction details on an actual study area and presents them as a model project.