• Journal of Ship and Ocean Technology
• /
• v.8 no.1
• /
• pp.31-41
• /
• 2004

A ducted marine propulsor has been widely used for the thruster of underwater vehicles for protecting collision damage, increasing propulsive efficiency, and reducing cavitation. Since a single-stage ducted propulsor contains a set of rotor and stator inside an annular duct, the numerical analysis becomes extremely complex and computationally expensive. However, the accurate prediction of viscous flow past a ducted marine propulsor is essential for determining hydrodynamic forces and the propulsive performances. To analyze a ducted propulsor having rotor-stator Interaction, the present work has solved 3D incompressible RANS equations on the sliding multiblocked grid. The flow of a single stage turbine flow was simulated for code validation and time averaged pressure coefficients were compared with experiments. Good agreement was obtained. The hydrodynamic performance coefficients were also computed.

• Structural Engineering and Mechanics
• /
• v.55 no.2
• /
• pp.263-280
• /
• 2015

This paper describes a study of the collision of hard steel spheres against aluminium thin circular plates at speeds up to 140 m/s. The tests were monitored by a high speed camera and a chronoscope, which allowed the determination of the ballistic limit and the plate deformation pattern. Quasi-static material parameters were obtained from tests on a universal testing machine and dynamic mechanical characterization of two aluminium alloys were conducted in a split Hopkinson pressure bar. Using a damage model, the perforation of the plates was simulated by finite element analysis. Axisymmetric, shell and solid elements were employed with various parameters of the numerical analysis being thoroughly discussed, in special, the dynamic model parameters. A good agreement between experiments and the numerical analysis was obtained.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.5
• /
• pp.127-133
• /
• 2003

For the purpose of evaluation the damage repairability of a Frame Type Passenger vehicle which experienced a Low Speed 40% Offset front and rear Crash Test. tests were made according to the RCAR testing procedures. Test results concluded ; (1) The deceleration at C.G(center of gravity) off 6.9∼11.39 was similar to that for the vehicle. The airbag system was found to affect neither the passenger's safety nor the savings of the repairing costs. (2) In order to improve the repairability of the Frame Type Passenger vehicle after collision should be a higher crash performance of the bumper on the RCAR standards.

• Journal of Trauma and Injury
• /
• v.34 no.3
• /
• pp.208-211
• /
• 2021

Gallbladder injuries are rare in cases of blunt abdominal trauma and are usually associated with damage to other internal organs. If the physician does not suspect gallbladder injury and check imaging studies carefully, it may be difficult to distinguish a gallbladder injury from gallbladder stone, hematoma, or bleeding. Therefore, in order not to miss the diagnosis, the clinical findings and correlation should be confirmed. In the present case, a 60-year-old male presented to a local trauma center complaining of pain in the upper right quadrant and chest wall following a motor vehicle collision. Abdominal computed tomography (CT) showed a hepatic laceration and hematoma in the parenchyma in segments 4, 5, and 6 and active bleeding in the lumen of the gallbladder. Traumatic gallbladder injuries generally require surgery, but in this case, non-operative management was possible with cautious follow-up consisting of abdominal CT and angiography with repeated physical examinations and hemodynamic monitoring in the intensive care unit.

• Earthquakes and Structures
• /
• v.26 no.1
• /
• pp.1-15
• /
• 2024

Isolation technology has been proven effective in reducing the seismic response of superstructures, where most of the deformation is concentrated in the isolation layer. However, in cases of earthquakes with intensities surpassing the fortification level of the area, or severe near-fault earthquakes, the isolation layer may experience excessive deformation, resulting in damage to the isolation bearings or collisions with the retaining wall or surrounding buildings. In this study, a finite element model using ABAQUS is established and compared with experimental test results to deeply investigate the influence of limit devices on the isolation layer and its response to the superstructure. The findings reveal that a larger limiter stiffness and a smaller reserved gap can achieve a more effective limiting effect. Nevertheless, a smaller reserved gap and a larger limiter stiffness may result in increased response of the superstructure. Therefore, rational selection of the reserved gap and limiter stiffness is crucial to reduce the acceleration response.

• Journal of Biosystems Engineering
• /
• v.36 no.6
• /
• pp.416-421
• /
• 2011

This study was initiated to prevent rear-end collision which causes the most frequent human damage by agricultural tractors. Therefore, this study was aimed to evaluate the luminous performance of a stop lamp for an agricultural tractor which could reduce rear-end collision. The performance test of luminous intensity distribution was conducted for a total of 12 tractor models classified by size (above 44 kW for large, 30~43 kW for medium, and below 29 kW for small) and production area (domestic, foreign manufacture) in accordance with Regulation No.7 of UNECE Vehicle Regulations-1958 Agreement considering ${\pm}$20 standard deviation. Three out of 5 large, 3 out of 4 medium, and all small tractors were resulted as inadequate for the test criterion. This study found that the luminous performance results were better as the size of agricultural tractors became bigger. One out of 4 foreign and 2 out of 8 domestic manufacturers were suitable for the test criterion, and overall no difference from the luminosity test results was observed between domestic and foreign manufacturers. In addition, the measuring points, HV, 5L, 5R, 5U and 5D with the minimal luminosity revealed flaws (80% of the proportion of faulty products). Therefore, it is urgent to improve the quality for measuring points (HV, 5U, 5L, 5R, 5D) of stop lamps to apply Regulation No. 7.

• Journal of the Korean Data and Information Science Society
• /
• v.20 no.5
• /
• pp.797-807
• /
• 2009

In a case of an automobile rear-end collision, scale of the collision which are the extent of vehicle damage and the injury of the passenger is affected by the speed change. Based on the photographic interpretation of the actual accident cases in the Seoul and the Incheon area, this study measured the depth of crush and calculated the speed change from the statement data of the accident and speed, and also injury data such as diagnosis, hospitalization days are collected. The period of hospitalization and diagnostics claimed proves to have no statistical correlation with the depth of vehicle crush and speed change. Based on the statistical analysis from this study and previous foreign studies, we found that there have been 78.1% of personal accidents didn't reach the injury threshold. There should be objective information on the scale of accident accepting the claims-to-be-injured in the future, and application of injury threshold level suggested are considered to be very useful.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.4
• /
• pp.490-496
• /
• 2012

The main object of this research is to minimize the shock effects which frequently result in fatal damage in offshore wind turbine on impact of barge. The collision between offshore wind turbine and barge is generally a complex problem and it is often impractical to perform rigorous finite element analyses to include all effects and sequences during the collision. On applying the impact force of a barge to the offshore wind turbine, the maximum acceleration, internal energy, and plastic strain are calculated for each load case using the finite element method. A parametric study is conducted with the experimental data in terms of the velocity of barge, thickness of the offshore wind turbine, and thickness and Mooney-Rivlin coefficient of the rubber fender. Through the analysis proposed in this study, it is possible to determine the proper size and material properties of the rubber fender and the optimal moving conditions of barge.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.24 no.4
• /
• pp.432-438
• /
• 2016

Whiplash injuries in low-speed rear-end collisions are the most common injuries and has been a social issue in insurance industry, such as excessive medical claim costs along with exaggerated injuries of victims and treatments from hospitals. According to the Korea Insurance Development Institute reports, the number of claims by rear-end collision was approximately 703,000, which accounts for 53.6 % of the total car-to-car collisions in 2014. Part of the neck injury claims in the Korea car insurance was approximately 28.3 %. Furthermore, approximately 98.4% of the injured persons in rear-end collisions sustained minor injuries under AIS2. In order to improve this situation as well as find out the severity of neck injuries from rear-end collision, the Korea Automobile Insurance Repair Research and Training Center conducted car-to-car rear-end crash tests that striking vehicles(SUV) collided into different sizes of struck-vehicles(small, middle, and large sedan) at the impact speeds of 8 km/h ~ 16 km/h. In order to analyze the whiplash injury, the BioRID-II was seated in each struck-vehicles, and the neck injury criteria(NIC), head contact time, maximum vehicle accelerations, and mean vehicle accelerations were calculated from values from the accelerations of the dummy and the struck-vehicles.

• Journal of Auto-vehicle Safety Association
• /
• v.11 no.4
• /
• pp.28-38
• /
• 2019

In the world, traffic accidents and environmental pollution caused by the increase of vehicles are becoming a serious social problem. According to the 2016 data published by the Korea Highway Traffic Authority, Korea owns 49.9 vehicles per 100 people. This is the 28th largest number among the 35 OECD member countries. In addition, the number of deaths from traffic accidents in Korea totaled 4,292, of which 1,714 were caused by traffic accidents involving vehicles and pedestrians. To reduce these human casualties, the automotive industry is constantly working on the development and commercialization of Adaptive Driver Assist System (ADAS). ADAS is the system providing convenience and safeness for drivers. In general, ADAS consists of Autonomous Emergency Braking (AEB), Highway Driving Assist (HDA), Adaptive Cruise Control (ACC), Lane Keeping Assist System (LKAS). Among them, the AEB detects the possibility of collision by the vehicle itself and plays a role of avoiding the collision or reducing the damage through active braking. For such AEB, Euro NCAP has been developing test-evaluation methods for the vulnerable since 2017. Therefore, In this paper analyzes the scenario of Euro NCAP VRU Test Protocol v3.0.1, which will be established in 2020, and proposes test conditions according to the Korean road traffic law. In addition, the reliability of the proposed scenario and test conditions was verified by comparing and analyzing the proposed theoretical evaluation formulas and actual test results.