• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.345-348
• /
• 1997

In this paper, a motion control algorithm is developed using a fuzzy control and the optimization of performance function, which makes a robot arm avoid an unexpected obstacle when the end-effector of the robot arm is moving to the goal position. During the motion, if there exists no obstacle, the end-effecter of the robot arm moves along the pre-defined path. But if there exists an obstacle and close to the robot arm, the fuzzy motion controller is activated to adjust the path of the end-effector of the robot arm. Then, the robot arm takes the optimal posture for collision avoidance with the obstacle. To show the feasibility of the developed algorithm, numerical simulations are carried out with changing both the positions and sizes of obstacles. It was concluded that the proposed algorithm gives a good performance for obstacle avoidance.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.8
• /
• pp.165-173
• /
• 1998

In this paper, a motion control algorithm is developed by using fuzzy control technique, which makes a robot arm avoid unexpected obstacles when the robot is moving from the start to a goal posture. During the motion, if there exist no obstacles the robot arm moves along the pre-defined path. But if some obstacles are recognized and close to the robot arm, a fuzzy controller is activated to adjust the path of the robot arm. To show the feasibility of the developed algorithm, numerical simulations and experiments are carried out. In the experiments, redundant planar robot arms are considered for the collision avoidance test, and it was proved that the developed algorithm gives good collision avoiding performance.

• Journal of Auto-vehicle Safety Association
• /
• v.11 no.3
• /
• pp.37-42
• /
• 2019

This paper presents an autonomous acceleration planning algorithm for pedestrian collision avoidance at urban. Various scenarios between pedestrians and a vehicle are designed to maneuver the planning algorithm. To simulate the scenarios, we analyze pedestrian's behavior and identify limitations of fusion sensors, lidar and vision camera. Acceleration is optimally determined by considering TTC (Time To Collision) and pedestrian's intention. Pedestrian's crossing intention is estimated for quick control decision to minimize full-braking situation, based on their velocity and position change. Feasibility of the proposed algorithm is verified by simulations using Carsim and Simulink, and comparisons with actual driving data.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.656-659
• /
• 1997

In order to improve vehicle safety, collision warning systems have been proposed by many researchers. This paper presents several algorithms to determine the degree of real end collision by using fuzzy logic and neural networks. In order to provide realistic data for the algorithm design, a data collection system has been installed on a passenger car.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.417-422
• /
• 1993

Robots working in the multiple robot system can perform the variety of tasks compared to the single robot system, while they are subject to the various tight constraints such as the precise coordination and the mutual collision avoidance during the task execution. In this paper, we provide an algorithm and graphical verification for collision avoidance between two robots working together. The algorithm calculates the minimum time delay for collision avoidance and the graphical verification is performed through the 3-D graphic simulator.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10b
• /
• pp.1014-1020
• /
• 1990

Iterative algorithms for detecting the collision of convex objects whose motion is characterized by a path in configuration space are described. They use as an essential substep the computation of the distance between the two objects. When the objects are polytopes in either two or three dimensional space, an algorithm is given which terminates in a finite number of iterations. It determines either that no collision occurs or the first collision point on the path. Extensive numerical experiments for practical problems show that the computational time is short and grows only linearly in the total number of vertices of the two polytopes.

• Journal of Auto-vehicle Safety Association
• /
• v.5 no.2
• /
• pp.17-23
• /
• 2013

This paper describes an algorithm for Advanced Emergency Braking(AEB) with tire-road friction coefficient estimation. The AEB is a system to avoid a collision or mitigate a collision impact by decelerating the car automatically when forward collision is imminent. Typical AEB system is operated by Time-to-collision(TTC), which considers only relative velocity and clearance from control vehicle to preceding vehicle. AEB operation by TTC has a limit that tire-road friction coefficient is not considered. In this paper, Tire-road friction coefficient is also considered to achieve more safe operation of AEB. Interacting Multiple Model method(IMM) is used for Tire-road friction coefficient estimation. The AEB algorithm consists of friction coefficient estimator and upper level controller and lower level controller. The numerical simulation has been conducted to demonstrate the control performance of the proposed AEB algorithm. The simulation study has been conducted with a closed-loop driver-controller-vehicle system using using MATLAB-Simulink software and CarSim Vehicle model.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2010.10a
• /
• pp.180-181
• /
• 2010

An estimation algorithm of collision risk among multiple ships has been developed in order to reduce human error and prevent collision accidents. The algorithm is designed to calculate the collision risk among ships based on Fuzzy theory by using AIS data as traffic information. In this paper, to validate the algorithm, the AIS data of actual collision accident, which occurred between a product carrier and a cargo carrier in Busan harbor in 2009 are collected. The replay simulation is carried out on the actual AIS data and the collision risk is calculated in real time. In this paper, the features of the estimation algorithm of collision risk and the results of replay simulation based on AIS data of actual collision accident are discussed.

• Journal of Navigation and Port Research
• /
• v.34 no.10
• /
• pp.727-733
• /
• 2010

An estimation algorithm of collision risk among multiple ships has been developed in order to reduce human error and prevent collision accidents. The algorithm is designed to calculate the collision risk among ships based on Fuzzy theory by using AIS data as traffic information. In this paper, to validate the algorithm, the AIS data of actual collision accident, which occurred between a product carrier and a cargo carrier in Busan harbor in 2009 are collected. The replay simulation is carried out on the actual AIS data and the collision risk is calculated in real time. In this paper, the features of the estimation algorithm of collision risk and the results of replay simulation based on AIS data of actual collision accident are discussed.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.10
• /
• pp.936-940
• /
• 2013

As the ageing population grows around the world, the demand for electric wheelchairs, an important mobility assistance device for the disabled and elderly, is gradually increasing. Therefore, a number of studies related to intelligent wheelchairs are actively underway to improve safety and comfort for wheelchair users. However, previous collision avoidance studies for intelligent wheelchairs have concentrated on collision avoidance methods with the shortest distance and by only changing either velocity or heading angle, rather than considering the forces exerted on the user. If a collision avoidance algorithm that does not consider these forces is applied to an intelligent wheelchair, there is a possibility of an accident due to falling as wheelchair users are generally disabled and elderly people. In this paper, we propose a collision avoidance algorithm which minimizes the forces exerted on a wheelchair user by minimizing the variation of the wheelchair's velocity and heading angle when the sizes, positions, velocities, and heading angles of a wheelchair and a moving obstacle are known.