• 대한조선학회논문집
• /
• 제57권2호
• /
• pp.70-79
• /
• 2020

The offshore installation units may be subjected to various accidental loads such as collision from supply vessels, impact from dropped objects, blast load from gas explosion and thermal load from fire. This paper deals with the design and strength evaluation method of the stiffened plate structures in response to a blast load caused by a gas explosion accident. It is a comprehensive review of various items used in actual project such as the size and type of the explosive loads, general design procedure/concept and analysis method. The structural analyses using simple analysis methods based on SDOF model and nonlinear finite element analysis are applied to the particular FPSO project. Also validation studies on the design guidance given by simple analysis method based on SDOF model have also considered several items such as backpressure effects, material behavior and duration time of the overpressure. A good correlation between the prediction made by simple analysis method based on SDOF model and nonlinear finite element analysis can be generally obtained up to the elastic limit.

• 한국해양공학회지
• /
• 제23권1호
• /
• pp.81-88
• /
• 2009

An evaluation of the structural integrity of an oceanographic buoy subjected to extreme loads was carried out in this study. Load components, such as the current, waves, and wind load, which were required for the sea's environmental conditions, were calculated precisely. A non linear finite element analysis was conducted to elucidate the structural response of the buoy under extreme environmental conditions. Based on the surface drift velocity scheme, a dynamic impact analysis was also carried out for the case of collision accidents. The proposed numerical technique would be a useful and cost effective tool for design scheme evaluation in the field of oceanographic buoys.

• 소성∙가공
• /
• 제18권3호
• /
• pp.236-244
• /
• 2009

In response to growing environmental and collision-safety concerns, the automotive industry has gradually used high-strength and ultla-high-strength steels to reduce the weight of automobiles. In order to overcome inherent process disadvantages of these materials such as poor formability and high springback at room temperature, hot forming has recently been developed and adopted to produce some important structural parts in automobiles. This method enables manufacturing of components with complex geometric shapes with minimal springback. In addition, a quenching process may enhance the material strength by more than two times. This paper investigates mechanical and forming characteristics of high-strength boron-alloyed steel with hot forming, in terms of hardness, microstructure, residual stress, and springback. In order to compare with experimental results, a finite element analysis of hot forming process coupled with phase transformation and heat transfer was carried out using DEFORM-3D V6.1 and also, to predict high temperature mechanical properties and flow curves for different phases, a material properties modeler, JMatPro was used.

• 정보저장시스템학회논문집
• /
• 제1권2호
• /
• pp.121-126
• /
• 2005

Recently, an optical disc system has been proposed using blue laser diode, high NA objective lens and groove only disc structure. A new method is needed to readout CD and DVD in this Blu-Ray Disc Recorder. In order to readout CD and DVD in Blu-Ray Disc Recorder, we adopted dual-lenses actuator in consideration of optical utilization efficiency, optical performance and insurance of sufficient W.D(working distance). This dual-lenses actuator has two objectives in radial direction, one is for CD/DVD and the other is for BD. We had to solve the induced problems of collision between disc and lens, DC tilt increase, AC tilt increase, 2nd resonance deterioration and AC sensitivity drop caused by disposing two lenses in an actuator. Also we developed high response twin- objective actuator with radial tilt function to apply high-speed BD Recorder or BD Player. Consequently we presented that two kinds of dual-lenses actuators for BD Recorder have been possessed good performance in 3 axis directions. And we measured eye patterns of CD, DVD and BD by using one BD optical pick-up with dual-lenses actuator.

• 정보저장시스템학회논문집
• /
• 제5권2호
• /
• pp.76-81
• /
• 2009

Mobile devices have become an important part of daily life. This is especially true of laptop PCs, which are portable enough to be used almost anywhere. Laptop PCs, however, cannot be nomadic if each component is not robust enough to endure rugged laptop operating environment. Generally, external shock makes collision on head-disk interface and damage to read-write performance. To minimize the likelihood of failure, shock analysis must be incorporated into the design of hard disk drive in laptop. This research explores the structure modification of laptop HDD base, for improving shock performance using finite element analysis which considers the flexibility of whole HDD structure. FE model is verified by modal test and finely tuned. Then we obtained the transmitted acceleration of spindle and pivot and the relative displacement between disk and slider head as shock response. Based on shock simulation, the structural dynamics modification is performed and the primary design parameters are extracted.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제9권5호
• /
• pp.509-524
• /
• 2017

Experiments and a numerical simulation were conducted to investigate the deformation and impact behavior of a corroded pipe, as corrosion, fatigue, and collision phenomena frequently occur in subsea pipelines. This study focuses on the deformation of the corrosion region and the variation of the geometry of the pipe under impact loading. The experiments for the impact behavior of the corroded pipe were performed using an impact test apparatus to validate the results of the simulation. In addition, during the simulation, material tests were performed, and the results were applied to the simulation. The ABAQUS explicit finite element analysis program was used to perform numerical simulations for the parametric study, as well as experiment scenarios, to investigate the effects of defects under impact loading. In addition, the modified ASME B31.8 code formula was proposed to define the damage range for the dented pipe.

• 해양환경안전학회지
• /
• 제21권3호
• /
• pp.259-265
• /
• 2015

It is clearly understood that e-navigation is beneficial to prevent collision and grounding of ships. The purpose of this study is to define and present a future ship operation system under the e-navigation environment in order to provide clear direction for the design of Korean e-navigation system. The future ship operation system consists of shipboard navigational system, shore supporting system and maritime communication system. To achieve the objectives of this study, the ship operation system was discussed separately into SOLAS ships and non-SOLAS ships in this study. In SOLAS ships, mariners become a system manager, choosing system presets, interpreting system output, and monitoring vessel response. In small ships and fishing vessels, mariners may enjoy their navigation by using the automatic tracking of ship's position on the portable electronic chart display. The improved bridge design, integrated and harmonized navigational system and single window reporting will reduce significantly the administrative and physical workload of mariners. Mariners can concentrate their attention more on navigational duty under the e-navigation environment. To build an effective Korean e-navigation system, the essential navigational functions and e-navigation services for small ships and fishing vessels must be identified and developed taking into account user needs.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2005년도 춘계종합학술대회
• /
• pp.565-568
• /
• 2005

RFID 시스템은 사물에 초소형 칩을 부착하여 사물의 정보를 무선 주파수로 전송하는 비접촉식 식별 기술이다. 최근 많은 기업들은 상품에 관한 정보를 자동으로 수집하기 위하여 이와 같은 RFID시스템을 생산 공정 등에 이용하고 있다. 여러 개의 태그들 중 하나와 통신하기 위하여 목표로 하는 태그는 먼저 식별되어야 한다. 이를 위하여 리더는 인식범위 내에 있는 모든 태그들의 식별 코드를 인식하여야 한다. 본 논문에서는 리더의 이전 질의에 대한 이력을 기억할 필요 없이 현재의 질의만을 이용하여 태그가 응답하는 무기억 특성을 갖는 태그 식별 프로토콜인 QT와 QT-sl 프로토콜의 성능을 분석한다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2006년도 춘계종합학술대회
• /
• pp.526-529
• /
• 2006

본 논문에서는 RFID 시스템에서 식별영역 내에 있는 태그들을 식별하기 위하여 무기억 특성을 갖는 QT 프로토콜을 개선한 QT_ss 프로토콜을 제안한다. QT_ss 프로토콜에서는 질의 문자열이 식별코드의 처음 비트들과 일치하는 태그는 자신의 식별코드로 응답한다. 태그가 응답하는 동안 리더가 충돌을 감지하면 리더는 중지 신호를 방송한다. 한편 태그들이 응답을 전송하는 도중에 중지 신호를 수신하면 전송을 중단한다. 성능 분석의 결과, 본 논문에서 제안한 QT_ss 프로토콜이 QT 프로토콜에 비하여 태그의 응답 비트 수가 월등히 적음을 알 수 있었다.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2008년도 춘계학술발표회
• /
• pp.249-255
• /
• 2008

2007년 12월 7일 태안앞바다에서 발생한 Hebei Spirit호와 크레인바지선 삼성 1호의 충돌사고로 인한 대형오염사고의 발생단계에서 대응하는 전 과정을 통해 많은 문제점이 지적되었다. 이에 따라 저자는 이번 오염사고를 오염방지 측면에서 그 원인을 집중적으로 분석하여 개선책, 즉 예인선의 예인시의 출항통제 및 항해검사 기준 강화, VTS 서비스 확충 및 관리책임부서를 해양경찰청으로의 이관, 적합한 정박지 지정 및 선종별, 화물별, 목적별로 분리하여 정박지 관리, 위험물운반선의 특별관리시스템 도입 등을 제시함으로써 추후 오염사고의 방지에 도움을 주고자 하였다.