• 인터넷정보학회논문지
• /
• 제13권1호
• /
• pp.7-14
• /
• 2012

본 논문은 불완전한 채널 감지를 고려한 포화 상태에서의 IEEE 802.11 carrier-sense multiple access with collision-avoidance(CSMA/CA)의 성능을 분석한다. 불완전한 채널 감지는 missed-detection과 false alarm을 포함하는데, 이러한 불완전한 채널 감지가 IEEE 802.11의 성능에 미치는 영향을 분석하고 이를 수식적으로 표현한다. 물리 계층의 불완전한 채널 감지를 표현하기 위해, 본 논문에서는 기존의 2차원 마코프 프로세스 모델을 수정했다. 모의실험 결과와 제안된 모델의 이론적인 결과가 일치하는 것을 보였다. 이러한 실험 결과를 바탕으로, 감지 확률이 IEEE 802.11의 성능에 있어 가장 중요한 요소임을 확인하였다.

• 한국통신학회논문지
• /
• 제22권10호
• /
• pp.2205-2218
• /
• 1997

본 논문에서는 이동 중에 휴대용 컴퓨터와 무선 모뎀을 이용하여 원격지 컴퓨터와 정보를 교환하는 기능을 갖는 미국의 Dataradio 사에서 제안한 클라이언트/서버 구조의 무선 통신 프로토콜인 CARMA-M(Collision Avoidance Radio Multiple Access-Mobile)과 DMP(Dataradio Multiplex Protocol)를 구현하였다. 제안된 각 프로토콜의 설명, 분석과 함께 DMP, CARMA-M 그리고 이들의 접속을 위한 LLC의 구현 방법을 자세히 설명하였다. 에러 감지와 정보의 복원 기능을 갖는 FEC 기법을 첨가하였으며, 구현한 프로토콜을 검증하기 위해 사용한, 무선 환경을 유선망 형태로 모의 실험한 방법을 보였다.

• Journal of Communications and Networks
• /
• 제17권4호
• /
• pp.419-427
• /
• 2015

There have been increases in the elderly population worldwide, and this has been accompanied by rapid growth in the health-care market, as there is an ongoing need to monitor the health of individuals. Wireless body area networks (WBANs) consist of wireless sensors attached on or inside the human body to monitor vital health-related problems, e.g., electrocardiograms (ECGs), electroencephalograms (EEGs), and electronystagmograms (ENGs). With WBANs, patients' vital signs are recorded by each sensor and sent to a coordinator. However, because of obstructions by the human body, sensors cannot always send the data to the coordinator, requiring them to transmit at higher power. Therefore, we need to consider the lifetime of the sensors given their required transmit power. In the IEEE 802.15.6 standard, the transmission topology functions as a one-hop star plus one topology. In order to obtain a high throughput, we reduce the transmit power of the sensors and maintain equity for all sensors. We propose the multiple-hop transmission for WBANs based on the IEEE 802.15.6 carrier-sense multiple-access with collision avoidance (CSMA/CA) protocol. We calculate the throughput and variance of the transmit power by performing simulations, and we discuss the results obtained using the proposed theorems.

• 수산해양기술연구
• /
• 제35권1호
• /
• pp.25-34
• /
• 1999

The Steering and Sailing Rules of International Regulation for Preventing Collisions at Sea now in use direct actions to avoid collision when two power-driven vessels are meeting on reciprocal or nearly reciprocal courses so as to involve risk of collision. But these rules do not refer to the minimum relative distances and safety relative distances between two vessels when they should take such actions.In this paper the ship's collision avoiding actions being analyzed from a viewpoint of ship motions, the mathematical formulas to calculate such relative distances necessary for taking actions to avoid collision were worked out. The values of maneuvering indices being figured out through experiments of 20 actual ships of small, medium, large and mammoth size and applied to calculating formulas, the minimum relative distances and safety relative distances were calculated. The main results were as follows. 1. It was confirmed that the criterion elements for collision avoiding actions in head-on situation of two vessels shall be the minimum relative distances and safety relative distances between them. 2. On the assumption that two vessels same in size and condition were approaching each other in head-on situation, the minimum relative distance of small vessel(GT : 160~650tons) was found to be about 4.7 times her own length, and those of medium (GT:2,300~4,500tons),large(GT:15,000~62,000tons) and mommoth (GT:91,000~194,000tons) vessels were found to be about 5.2 times, about 5.2 times and about 6.1 times their own lengths respectively. 3. On the assumption that two vessels same in size and condition were approaching each other in head-on situation, the safe relative distance of small vessel (GT : 160~650tons) was found to be about 6.8 times her own length, and those of medium (GT : 2,300~4,500tons), large (GT: 15,000~62,000tons) and mammoth (GT : 91,000~194,000tons) vessels were found to be about 9.0 times, about 6.3 times, and about 8.0 times their own lengths respectively. 4. It is considered to be helpful for the safety of ship handling that the sufficient safe relative distances for every vessels shall be more than about 12~14 times which are 2 times minimum relative distance, their own length on above assumption.

• 한국항해항만학회지
• /
• 제32권7호
• /
• pp.521-527
• /
• 2008

The Istanbul Strait is one of the important waterways in the world. And its southern entrance has a highly congested local traffic. Till now there are several studies regarding how the Istanbul Strait is dangerous to navigate and how those dangers can be mitigated. But there is no study regarding local traffic which is posing great collision risk. In a certain traffic area, marine traffic safety assessment parameters are traffic volume, frequency of collision avoidance maneuver, traffic density, traffic flow and potential encounter, In this paper local traffic volume, traffic flow and potential encounter number of local traffic vessels and possibility of collision are investigated in order to find degree of danger at the southern entrance of the Istanbul Strait. Finally by utilizing those, risky areas are determined for southern entrance of the Istanbul Strait. Results have been compared to a previous study regarding risk analysis at congested areas of the Istanbul Strait (Aydogdu, 2006) and consistency of the results were presented.

• International Journal of Internet, Broadcasting and Communication
• /
• 제15권3호
• /
• pp.219-230
• /
• 2023

With the development of autonomous driving technology, as the use of software in vehicles increases, the complexity of the system increases and the difficulty of development increases. Developments that meet ISO 26262 must be carried out to reduce the malfunctions that may occur in vehicles where the system is becoming more complex. ISO 26262 for the functional safety of the vehicle industry proposes to consider functional safety from the design stage to all stages of development. Specifically at the software level, the requirements to be complied with during development and the requirements to be complied with during verification are defined. However, it is not clearly expressed about specific design methods or development methods, and it is necessary to supplement development guidelines. The importance of analysis and verification of requirements is increasing due to the development of technology and the increase of system complexity. The vehicle industry must carry out developments that meet functional safety requirements while carrying out various development activities. We propose a process that reflects the perspective of system engineering to meet the smooth application and developmentrequirements of ISO 26262. In addition, the safety analysis/verification FMEA processforthe safety of the proposed ISO 26262 function was conducted based on the FCAS (Forward Collision Avoidance Assist System) function applied to autonomous vehicles and the results were confirmed. In addition, the safety analysis/verification FMEA process for the safety of the proposed ISO 26262 function was conducted based on the FCAS (Forward Collision Avoidance Assist System) function applied to the advanced driver assistance system and the results were confirmed.

• 대한인간공학회지
• /
• 제36권5호
• /
• pp.447-458
• /
• 2017

Objective: The purpose of this study is to present the basic guidelines for preventing human error by measuring and analyzing the risk of collision perceived by the ship operator in the collision risk situation by using Korea Coast Guard patrol ships. Background: In the last 5 years, 97.5% of the causes of ship collision occurred at the sea was caused by human factors. However, the rate of marine accidents due to human error has not been reduced yet. Experiments and researches on the ship operators using the ships in actual operation are rarely performed. Method: Using two K.C.G Ships on the sea, the ship measured by 30 persons who are the subject of the ship (ship operator) when both ships approach and the relative distance gradually decreases in four encounter situations, perceived ship collision risk (PSCR) data were analyzed by statistical analysis. Results: The age and boarding career of the ship operator in the situation of ship collision risks encountered a negative impact on perceived collision risk in all four opposing encounter situations S1 ($000^{\circ}$), S2 ($045^{\circ}$), S3 ($090^{\circ}$) and S4 ($135^{\circ}$) respectively. That is, the higher the age of the ship operator, the lower the perceived risk of collision and the lower the age, the higher the risk of collision. Also, there was a difference between the average of group A (20~30 years) and group B (40~50 years) according to age of the ship operators at $000^{\circ}$, $045^{\circ}$ and $090^{\circ}$ and there was no difference at $135^{\circ}$. The mean difference of the experience of boarding career was also significantly different between group A (less than 4 years) and group B (more than 5 years), but there was no significant difference at $135^{\circ}$. Conclusion: The results showed that age and boarding career of the ship operators had negative impact on perceived collision risk and there was a difference in perceived risk of collision according to age and abundance of boarding career. As a result, by focusing on the ship operators who are in the age group of 20~30 years old and have less than 4 years of experience in boarding the ship. It is expected that the effect of prevention of marine accidents can be expected by avoiding collision avoidance. Application: The results of this study can be used as policy data of related organizations to prevent human error of ship operators and as training data of training institutes.

• 전기학회논문지
• /
• 제61권2호
• /
• pp.291-297
• /
• 2012

In this paper, potential field algorithm was used for path planning in dynamic environment. This algorithm is used to plan a robot path because of its elegant mathematical analysis and simplicity. However, there are some problems. The problems are problem of collision risk, problem of avoidance path, problem of time consumption. In order to solve these problems, we fused potential field with fuzzy system. The input of the fuzzy system is set using relative velocity and location of robot and obstacle. The output of the fuzzy system is set using the weighting factor of repulsive potential function. The potential field algorithm is improved by using fuzzy potential field algorithm and, path planning in various environment has been done.

• 동력기계공학회지
• /
• 제16권1호
• /
• pp.84-90
• /
• 2012

In unmanned vehicles' navigation, the shapes of obstacles are generally irregular and complex. The motion of vehicles based on the range sensor system such as ultrasonic sensors or laser sensors can be unstable due to the irregular shape of the obstacles. In this case, to generate stable trajectory of unmanned vehicles equipped with range sensors, we need an approach that can simplify an obstacle's irregular shape information. In this paper, we propose the trajectory generation algorithm that an vehicle can stably navigate in the environments where irregular shaped obstacles are scattered. The proposed method is verified through the analysis of vehicle's trail and direction data acquired by simulations and implementations.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.1040-1045
• /
• 1991

An approach to time-varying obstacle avoidance problem is pursued. The mathematical formulation of the problem is given in Cartesian space and in joint space. To deal with the time-varying obstacles, view-time is introduced. A view-time is the time interval viewing the time-varying obstacles to model equivalent stationary obstacles. For the analysis of the properties of the view-time, avoidability measure is defined as a measure of easiness for a robot to avoid obstacles. Based on the properties, a motion planning strategy to avoid time-varying obstacles is derived. An application of the strategy to the collision-free motion planning of two SCARA robots and the simulation on the application are given.