• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.2
• /
• pp.223-227
• /
• 2013

Dust collecting performance of cyclone collector for oil mist was alalyzed in the study. The purposes of using cutting fluid during cutting have been colling, lubricating, chip washing and anti-corroding. However, the present manufactaring industry restricts the use of cutting fluid because cutting fluid confains poisonous substances which are harmful to the human body. Also, the optimum design oil-mist collector. The new oil mist collector was designed. In the near future, this device must be tested in the real machining center and CNC machine. Cutting using oil-mist showed better cutting characteristics than dry, air and fluid cutting with respect to by cutting force, tool wear and surface roughness. The model(A, B Type cyclone) of the set of fixture and alveolus are made by using a CAE software. Finally, we have obtained a model A Type solution by using orthogonal array. Therefore, it could be confirmed that as the model-A was increased and model-B was decreased, cut diameter was decreased.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.143.2-143.2
• /
• 2010

Therefore, with this development assignment we'd like to develop the hybrid system combining 800W DMFC (Direct Methanol Fuel Cell) and 1.6kW of Lithium secondary battery pack which can be applied to the most common small cart. a scooter, to secure the development capability of hundreds of Watts DMFC, the high-capacity Lithium secondary battery pack, the technology of BMS (Battery Management System) and the development technology of hybrid system. DMFC, in fact, has lower energy efficiency than PEMFC (Polymer Electrolyte Membrane Fuel Cell); however, it has several advantages in terms of fuel storage and use. It is pretty easy to be stored and used without any additional colling and heating devices because of its insensitive liquid methanol to temperature. In conclusion, DMFC system is the most suitable device for small mobile vehicles.

• Proceedings of the KIEE Conference
• /
• 1987.11a
• /
• pp.147-149
• /
• 1987

On the colling mill plant, the qulity of products depends on the ability to follow up the command of roll speed and the magnitude of impact drop. In this paper, the frequency response method is applied to the main motor system of No.1 Plate Mill Plant in POSCO. This paper show the influences when the pseudo random noise as test signal is applied to the system to be measured and presents the proper magnitude of test signal.

• Proceedings of the IEEK Conference
• /
• 2001.06a
• /
• pp.155-158
• /
• 2001

A 640Gb/s high-speed ATM switching system that is based on the technologies of advanced MCM, 0.25um CMOS and optical WDM interconnection is fabricated for future N-ISDN services. A 40 layer, 160mm$\times$114mm ceramic MCM realizes the basic ATM switch module with 80Gbps throughput. The basic unit ATM switch module with 80Gb/s throughput. The basic unit ATM switch MCM consists of in 8 chip advanced 0.25um CMOS VLSI and 32 chip I/O Bipolar VLSIs. The MCM employs an 40 layer, very thin layer ceramic MCM and a uniquely structured closed loop type liquid colling system is adopted to cope with the MCM's high-power dissipation of 230w. The MCM is Mounted on a 32cm$\times$50cm mother board. A three stage ATM switch is realized by optical WDM interconnection between the high-performance MCM.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.295-295
• /
• 2008

This study introduced waste water treatment method applied superconductor HGMS(High Gradient Magnetic Separation). HGMS method treat high efficient method for various waste water. we have surveyed superconducting magnetic separation technology and reviewed the status of related industries using applied superconductivity. We fabricated the prototypes of magnetic matrix filter consisting of stainless steel mesh, which is a core component in the magnetic separation system. In our basic preliminary experiment using HGMS, it was made clear that the fine para-magnetic particles in the rolling colling wasted water obtained from rolling process of POSCO can be separated with high efficiency.

• Journal of Korean Association for Spatial Structures
• /
• v.7 no.6
• /
• pp.91-101
• /
• 2007

The purpose of this study is to provide fundamental cooling design data for the large public enclosures as gymnasium. This study executed indoor thermal environment verification of the existing gymnasium by measuring temperature distribution with and without cooling the space in summer. Colling loads from human body was not considered. We examined various indoor thermal environment factors of the large enclosed space in this study which include vertical and horizontal temperature distribution, supply and return air flow feature, thermal comfort environment feature, amount of ventilation and etc.