• 한국광학회지
• /
• 제19권1호
• /
• pp.31-35
• /
• 2008

결합효율이 높고 정렬오차 발생 시 결합효율의 저하가 작은 광통신용 비구면 렌즈 시준기를 설계하였다. 비구면 시준 렌즈는 GRIN 렌즈와 작동거리와 두께가 유사하고 외경이 동일한 원통형 막대 형태로 설계해 GRIN 렌즈를 대체할 수 있도록 하였다. 결합효율의 저하는 시준렌즈의 구면수차에 의해 주요하게 발생하므로, 비구면 렌즈 시준기가 볼 렌즈, GRIN 렌즈 및 C-렌즈 시준기보다 높은 결합효율을 가지도록 비구면 계수를 최적화 해 구면수차를 낮추었다. 설계한 비구면 렌즈 시준기의 결합효율은 기존 시준기들보다 높았으며 정렬오차에 따른 결합효율의 감소도 작았다.

• 한국전자통신학회논문지
• /
• 제17권2호
• /
• pp.255-264
• /
• 2022

종래의 spot형 UV경화기는 복수의 렌즈를 이용한 collimator 광학계를 구성하여 광속을 광케이블로 입사하도록 하고 있다. 전달 광 효율을 높이기 위해 3매 이상의 렌즈로 구성된 collimator 광학계가 필요하며 이에 따라 광학계 정렬에 어려움이 있고, 시스템을 컴팩트하게 구현하기 어렵다. 본 연구에서는 3매 렌즈로 구성된 collimator 광학계와 동등한 수준의 스폿 직경 및 광 효율을 구현할 수 있는 단일 TIR 렌즈 collimator 설계하였다. 이를 통해 최소 조도 편차를 갖는 경화 위치에서의 광 효율이 33.2 % 수준으로 참조 collimator 광학계의 성능과 유사한 수준을 확보하였고, 경화면에서의 조도 편차는 18.8 % 수준으로 양호한 성능을 확보하였다. 또한, 이미지 면에서의 조도 평탄화 기능을 갖는 fly-eye lens를 condensing 렌즈 앞단에 배치함으로써, TIR 렌즈만 적용한 경화 광학계와 비교할 때, 유효 경화영역 직경이 5.0 mm에서 3.0 mm 로 줄어 보다 높은 경화 에너지 밀도를 구현할 수 있었으며, 조도 편차는 14.4 % 수준으로 현격히 개선할 수 있음을 확인하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.132-136
• /
• 2002

Optical collimating lenses are play a role as maintenance parallel light and as a kind of optical collimating lens, there is Ball lenses, GRIN-rod lenses, spherical lenses and aspherical lenses etc. but recently GRIN lens has monopolized a market. The performance of optical collimator depended on the coupling efficiency. In this paper, we were compared and analyzed to be measured values of coupling efficiency with respect to optical working distance using GRIN rod lenses and spherical lenses. In the case of GRIN lenses with a beam size of 420 ${\mu}{\textrm}{m}$, the minimum coupling efficiency was obtained to a measured value of 0.15 ㏈ and in the case of spherical lenses was obtained to a measured value of 0.12 ㏈ on the same condition. In results, we found that a performance of spherical lenses be better as compared with a that of GRIN lens.

• Current Optics and Photonics
• /
• 제7권3호
• /
• pp.263-272
• /
• 2023

A collimator refers to an optical system that images a collimated beam at a desired point. A resolution target located at a near distance can be converted into a virtual image located at a long distance. To test the resolution for mobile cameras, a large target is placed at a long distance. If a collimator system is used, the target can be placed at a near distance. The space required for a resolution inspection can thus be drastically reduced. However, to inspect a mobile camera, the exit pupil of the collimator system and the entrance pupil of the mobile camera must match, and the stop of the collimator system must be located on the last surface. Because a collimator system cannot be symmetrical with respect to the stop, the distortion becomes extremely large, which can be corrected by combining the collimator symmetrically with respect to the object plane. A novel system was designed to inspect an optical lens on a mobile phone. After arranging the refractive power, lenses were added using the equivalent lens design method. The distortion was reduced to less than 1%. This optical system satisfies a half-field angle of 45° and an optical performance sufficient for inspection.

• 조명전기설비학회논문지
• /
• 제30권3호
• /
• pp.21-29
• /
• 2016

In this paper, optical tracking and analysis was carried out to find the optical properties with respect to various geometric design parameters of collimator lens which is very efficient when collect the light. As a result, a whole, ellipse incident part can obtain a high light efficiency and a narrow beam angle, and angled cylinder incident part is confirmed to obtain high efficiency and a narrow beam angle at a certain height or more. When Transmission part have a specific surface which can reflect the light in forward direction, a good optical properties was confirmed.

• Current Optics and Photonics
• /
• 제7권2호
• /
• pp.213-221
• /
• 2023

The optical window, as a part of the collimator system, is the connector between the outside light source and the optical system inside a vacuum tank. The temperature and pressure difference between the two sides of the optical window cause not only thermoelastic deformation, but also refractive-index irregularities. To suppress the influence of these two changes on the performance of the collimator system, thermo-optical analysis is employed. Coefficients that characterize the deformations and refractive-index distributions are derived through finite-element analysis, and then imported into the collimator system using a user-defined surface in ZEMAX. The temperature and pressure difference imposed on the window seriously degrade the system performance of the collimator. A decentered and tilted lens group is designed to correct both field aberrations and the thermal effects of the window. Through lens-interval adjustment of the lens group, the diffraction-limited performance of the collimator can be maintained with a vacuum level of 10^-5 Pa and inside temperature ranging from -100 ℃ to 20 ℃.

• 조명전기설비학회논문지
• /
• 제29권11호
• /
• pp.1-5
• /
• 2015

In this paper, we propose the optical system design for a medium sized LED marine lanterns which simplifies the multi-layer structure into a single structure. In order to satisfy the target fixed intensity(35,000cd) and vertical divergence($-2.5^{\circ}{\sim}-4.0^{\circ}$, $+2.5^{\circ}{\sim}+4.0^{\circ}$), we use the total internal reflection collimator lens. And a Monte Carlo simulation has been utilized to optimize a condition of a LED package, TIR lens and outside lens. The computer simulation results indicated that this LED marine lanterns can produce of a fixed intensity(35,382cd) and vertical divergence($-3.1^{\circ}{\sim}+2.5^{\circ}$). Using the this optical system, we achieve the target value of LED lanterns.

• 한국광학회:학술대회논문집
• /
• 한국광학회 1990년도 제5회 파동 및 레이저 학술발표회 5th Conference on Waves and lasers 논문집 - 한국광학회
• /
• pp.82-86
• /
• 1990

A camera type optical bench system equipped with a lens collimator and an image analyzer is fabricated to measure the equivalent focal length and distortion of lenses. This system is automatized by the computer which controls stepping motors. A nodal slide optical bench system equipped with an off axis reflective collimator is fabricated and improved by using rotating arms and air bearing system. distortion measurement on a wide angle lens using the camera method and the nodal slide method is reported. Defocusing error in the distortion measurement with the nodal slide optical bench is analyzed and improved by iteration method to search the correct image point.

• 한국광학회지
• /
• 제28권2호
• /
• pp.68-74
• /
• 2017

특정한 파장대역에서 파장변화에 따른 굴절능의 변화를 1차, 2차 미분까지 보정하여 기준파장과 그 인근 파장 대역에서 굴절능의 변화가 매우 적도록 안정화된 광학계를 설계하는 방법에 대하여 연구하고, 이를 적용하여 회절한계의 시준렌즈를 설계하였다. 설계된 광학계는 파장 변화에 대하여 매우 안정하였고, 파장 360~410 nm 대역에서 유효초점거리의 변화가 0.002% 이내로 매우 적었다.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2007년도 동계학술발표회 논문집
• /
• pp.237-238
• /
• 2007