• 한국수정란이식학회지
• /
• 제26권3호
• /
• pp.153-158
• /
• 2011

This study was performed in order to simplify the operation and minimize stress of donor and be readily available in the field with low cost and high quality embryos using the Direct Embryo Collection (DEC). Donors, at random stages of the estrous cycle, received a CIDR. 7 days later, 200 mg FSH was treated with 40, 30, 20, 10 mg FSH levels in declining doses twice daily by intramuscular injection for 4 days. On the 3rd day administration of FSH, 25 mg $PGF_2{\alpha}$ was administered and CIDR was withdrawn. After FSH injections were complete, donors were artificially inseminated twice at 12 hr intervals. The donor cattle received 250 ${\mu}g$ GnRH at time of 1 st insemination and embryos were recovered 8 days after the 1st insemination. Embryo collection from superovulated donors was performed to flushing by non-surgical methods of 3-way, 2-way and DEC (l-way). The average number of recovered embryos were 11.25${\pm}$0.63, 12.5${\pm}$0.65 and 11.75${\pm}$0.48 from operations of 3-way, 2-way and DEC methods, respectively. There were no significant differences among the embryo collection methods. Also, The average number of transferable embryos were 6.25${\pm}$0.48, 7.25${\pm}$0.48 and 7.25${\pm}$0.63 from each embryo collection procedures. The number of transferable embryos was no differences among the 3-way, 2-way and DEC methods, respectively. Meanwhile, the ratio of transferable embryos for all recovered embryos from DEC methods was higher as 61.7 % than 55.6 %, 58 % from methods of 3-way, 2-way. And the flushing solution required for recovering embryos by DEC method was significantly lower as 0.28${\pm}$0.32 1 than 1.8${\pm}$0.12 1, 1.75${\pm}$0.10 1 from 3-way, 2-way methods (p<0.05). Also, the time required for recovering embryos by DEC methods was significantly lower as 27${\pm}$2 min than 51${\pm}$3, 45${\pm}$2 min, respectively (p<0.05). In conclusion, these results suggest that DEC method for embryo collection may be effectively used for production of in vivo embryos using less flushing solution and, it might be effectively available in the field compared to conventional embryo recovery methods using 3-way or 2-way balloon catheter.

• ETRI Journal
• /
• 제37권1호
• /
• pp.147-156
• /
• 2015

A typical solid-state drive contains several independent channels that can be operated in parallel. To exploit this channel-level parallelism, a variety of works proposed to split consecutive write sequences into small segments and schedule them to different channels. This scheme exploits the parallelism but breaks the spatial locality of write traffic; thus, it is able to significantly degrade the efficiency of garbage collection. This paper proposes a channel-aware write reordering (CAWR) mechanism to schedule write requests to different channels more intelligently. The novel mechanism encapsulates correlated pages into a cluster beforehand. All pages belonging to a cluster are scheduled to the same channels to exploit spatial locality, while different clusters are scheduled to different channels to exploit the parallelism. As CAWR covers both garbage collection and I/O performance, it outperforms existing schemes significantly. Trace-driven simulation results demonstrate that the CAWR mechanism reduces the average response time by 26% on average and decreases the valid page copies by 10% on average, while achieving a similar hit ratio to that of existing mechanisms.

• 한국도서관정보학회지
• /
• 제28권
• /
• pp.61-91
• /
• 1998

In contemporary education, a school library is considered and valued as a vital and integral component of a school's instructional program. Especially, school library materials should contribute to execution of school curriculums through wide provision of resources. The results of the study are as follows. 1. The term 'library materials' should be changed into 'library resources' with a broad meaning. And, the scope of school library materials should include printed materials, audio-visual materials, electronic materials, associated equipment and other library resources. 2. It is desirable that the minimal standards of total collection is 5 books and 3 AV for a student in elementary schools, 7 books and 5 AV for a student in middle schools, 10 books and 7 AV for a student in high schools. 3. Annual growth is 0.5 for a student in elementary schools, 1 for a student in middle schools and 1.5 copy for a student in high schools. And, the number of minimal serials is 20 titles in elementary schools, 30 titles in middle schools and 50 tides in high schools. 4. Besides, basic collection, with the advances of technology, the school library collection should include new formats and delivery systems such as CD, video discs, videotex, computer software, satellite transmission etc. 5. The recommendable annual ratio of withdrawl is 3 to 5% for update and functional materials.

• 한국철도학회논문집
• /
• 제10권4호
• /
• pp.414-419
• /
• 2007

The contact characteristics of the current collection system are investigated by analyzing data collected during a test run of the Korean high speed rail vehicle. For the analysis, the signals from accelerometers and load cells attached to the various parts of the pantograph are analyzed in both the time and frequency domains. In the frequency domain, the pantograph response consists of low frequency components related to the rigid-body motion of the panhead assembly and high frequency components due to the structural vibration modes of the pantograph. The analysis shows that the inclusion of the high frequency structural vibration modes of the pantograph in the contact force calculation has a negligible effect on the predicted mean value of the contact force but significantly affects the magnitude of its fluctuations. This finding implies that numerical simulations using lumped element models of the pantograph may accurately predict the mean contact force but is limited in its capacity for predicting the fluctuation about the mean. Since the ratio of the fluctuation to the mean in the contact force increases with increased train speed, the limitation of the predictions based on numerical simulation results becomes more pronounced at higher train speed.

• Plant Resources
• /
• 제6권2호
• /
• pp.98-101
• /
• 2003

Colored apiculus, awn, and long empty glume are indicators of wildness and are usually eliminated during rice domestication. Genetic analysis was conducted to clarify the inheritance patterns of awn, apiculus color, and long empty glume in Korean rice collection. Based on individual characterization of F$_2$ progenies derived from crosses between parents with colorless and purple apiculus, two (3 colored: 1 colorless) or three dominant genes (9 purple: 3 red: 4 colorless) are estimated as controlling this character by simultaneous complementary action. Different inheritance systems were detected between S237 and S245 of 'Shareibyeo' which belong to the weedy type. To determine the genes responsible in awning and long empty glume characters, the inheritance of landrace varieties of rice ('Naengdo' and 'Yuna') was investigated. In the crosses of awned land race and awnless cultivar, three dominant genes are supposed to control the awning genetic system by 63 awned: 1 awnless individual. As for long empty glume, one recessive gene, g-l on the chromosome 4, was the one controlling the segregation ratio of 3 normal empty: 1 long empty glume. By analyzing the Korean rice collection, the inheritance systems of these wild characters may lead to a better understanding of rice domestication in the future.

• 자원리싸이클링
• /
• 제19권1호
• /
• pp.49-56
• /
• 2010

이 논문은 폐기물의 전략적 원류관리와 재활용률 향상에 기여하는 것이 목적이며 이를 위한 기술정보의 분석 도출과 개선방안 제시에 중점을 둔다. 특히 인센티브 기반의 폐기물 재활용 시스템, RFID(Radio Frequency Identification)를 이용한 폐기물 자동수거 관리시스템, 폐기물 정보관리시스템 중심으로 관련기술동향과 국내외 특허, 해외연구사례를 분석한다. 논문은 기술, 정책, 연구동향, 검토분석, 결론으로 구성된다.

• 한국응급구조학회지
• /
• 제23권2호
• /
• pp.75-86
• /
• 2019

Purpose: It is crucial that 119 emergency medical technician (EMT) have adequate knowledge regarding forensic science. This study aimed to assess the forensic knowledge of EMTs in the Republic of Korea. Methods: This study was conducted on EMTs of five fire stations in D metropolitan city between August 6 and August 13, 2018. A questionnaire consisting of items on crime-related incident recognition (i.e., mechanical asphyxiation, trauma, sex crimes, and child abuse), forensic evidence management (i.e., evidence collection, preservation, and recording) was administered to the participants. Finally, 119 questionnaires were analyzed. Results: The ratio of correct answers for crime-related incidents recognition was 55.82%, which was lower than that for forensic evidence management(84.5%). In particular, the scores for the type of neck compression(16.5%) and wound assessment(44.0%) were low. The percentage of correct answers for forensic evidence management was 78.4% for evidence collection, 84.4% for evidence preservation, and 90.6% for evidence recording. Previous forensic education experience was not a significant variable. Conclusion: Specific and practical forensic science education on perception of crime-related incident, including asphyxia and wound identification, and forensic evidence collection is needed.

• 전기학회논문지
• /
• 제56권5호
• /
• pp.854-859
• /
• 2007

A wind farm consists of many wind generator(WG)s therefore, it is generally a complex power system. A wind farm as a distributed generation(DG) affects utility power system. If a conventional protection schemes are applied, it is difficult to detect faults correctly and the schemes can't provide proper coordination in some cases. This paper presents a protection algorithm for a wind farm which consists of a looped collection circuit. Because the proposed algorithm can distinguish between an internal fault and an external fault in a wind farm, The proposed algorithm can disconnect the faulted section in a wind farm. This algorithm is based on an overcurrent protection technique with the change of the ratio of the output current of a generator to the current of the looped line connected to each generator to collect the each generator's power. In addition, operating time of the algorithm is shortened by using the voltage drop at a generator collection point. The performance of the proposed algorithm was verified under various fault conditions using PSCAD/EMTDC simulations.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -2
• /
• pp.723-726
• /
• 2002

This paper describes the design, fabrication, and measurement of a sequential-rotation microstrip-array antenna for the Electronic Toll Collection System (ETCS). The ETCS is made possible by using roadside equipment with radiation pattern that can accurately pinpoint the designated communication area, without interference from other lanes. The sequential-rotation microstrip-array antenna was applied to the absorber to reduce the side lobe level (SLL). Results showed that the antenna yields a return loss at a center frequency of -20.675 dB, an axial ratio of 1.15 dB, and a gain of 20.26 dBi.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2010년 춘계학술대회논문집
• /
• pp.456-459
• /
• 2010

Icing is one of the most serious hazards for aircraft. The amount and rate of icing depend on a number of meteorogical and aerodynamic factors. Of primary importance are amount of liquid water content of droplets, their size, the temperature of aircraft surfaces, the collection efficiency, and the extent of supercooled droplets. In this study, in-flight icing analysis of low reynolds number high aspect ratio wing is carried out by using FENSAP-ICE. Each liquid water contents with altitude is obtained from FAR 25 Appendix-C. And the collectoin efficiency is calculated to check out the ice accretion position of wing with two angles of attack. The degradation of aerodynamic characteristics of aircraft are figured out by investigating the accretion of rime and glaze ice.