• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.210.2-210.2
• /
• 2013

현재 국내의 상용화된 디지털 방식 X-선 영상장치에서 간접변환방식은 대부분 CsI를 사용하고 있으며, X-선 흡수에 의해 전기적 신호를 발생시키는 직접변환방식은 Amorphous Selenium(a-Se)을 사용한다. a-Se은 진공 중에 녹는점이 낮아 증착시 substrate의 온도에 따라 민감한 변화를 보인다. 본 연구에서는 간접변환방식에 비해 높은 영상의 질을 획득할 수 있는 직접변환방식의 a-Se기반 X-선 검출기 제작 시 substrate에 인가된 온도에 따른 특성을 연구하여 최적화 된 substrate의 온도를 알고자 한다. 본 실험에서는 glass에 투명한 전극물질인 Indium Tin Oxide (ITO)가 electrode로 형성된 substrate를 사용하였으며 그 상단에 a-Se을 Physical Vapor Deposition (PVD)방식을 거쳐 X-선 검출기 샘플을 제작하였다. PVD 공정 시 네 개의 보트에 a-Se 시료를 각각 100g씩 총 400g을 넣고, $5{\times}10-5Torr$까지 진공도를 낮추었다. 보트의 온도는 $270^{\circ}C$에서 40분 $290^{\circ}C$에서 90분으로 온도를 인가하여 a-Se을 기화시켜 증착하였다. 증착 시 substrate 온도를 각각 $20^{\circ}C$, $40^{\circ}C$, $60^{\circ}C$, $70^{\circ}C$ 네 종류로 나누어 실험을 진행하였다. 끝으로 증착된 a-Se 상단에 Au를 PVD방식으로 electrode를 형성시켜 a-Se기반의 X-선 검출기 샘플 제작을 완료하였다. 제작된 a-Se기반의 X-선 검출기 샘플의 두께는 80에서 $85{\mu}m$로 온도에 따른 차이가 없었다. 이후에 전기적 특성을 평가하기위해 electrometer와 oscilloscope를 이용하여 Dark current와 Sensitivity를 측정하여 Signal to Noise Ratio(SNR)로 도출하였으며 Scanning Electron Microscope(SEM) 표면 uniformity를 관찰하였다. 또한 제작된 a-Se기반 X-선 검출기 샘플의 hole collection 성능을 확인하고자 mobility를 측정하였다. 측정결과 a-Se의 work function을 고려한 $10V/{\mu}m$기준에서 70kV, 100mA, 0.03sec의 조건의 X-선을 조사 하였을 때 Sensitivity는 세 종류의 검출기 샘플이 15nC/mR-cm2에서 18nC/mR-cm2으로 비슷한 양상을 나타내었지만, substrate온도가 $70^{\circ}C$때의 샘플은 10nC/mR-cm2이하로 저감됨을 알 수 있었다. 그리고 substrate온도 $60^{\circ}C$에서 제작된 검출기 샘플의 전기적 특성이 SNR로 환산 시, 15.812로 가장 우수한 전기적 특성을 나타내어 최적화 된 온도임을 알 수 있었다. SEM촬영 시 온도상승에 따라 표면 uniformity가 우수하였으며, Mobility lifetime에서는 $60^{\circ}C$에서 제작된 검출기 샘플이 deep trap 수치가 높아 hole이 $0.04584cm2/V{\cdot}sec$로 $0.00174cm2/V{\cdot}sec$의 electron보다 26.34배가량 빠른 것을 확인하였다. 본 연구를 통해 a-Se증착 시, substrate에 인가된 온도는 균일한 박막의 형성 및 표면구조에 영향을 미치며 온도가 증가할수록 안정적인 전기적 특성을 나타내지만 $70^{\circ}C$이상일 시, a-Se층의 결정화가 생겨 deep trap을 발생시켜 전기적 특성이 저하됨을 확인 할 수 있었다. 따라서 증착 시의 substrate의 온도 최적화는 a-Se기반 X-선 검출기의 안전성 및 성능향상을 위해 불가피한 요소가 된다고 사료된다.

• Journal of Distribution Science
• /
• v.14 no.4
• /
• pp.39-46
• /
• 2016

Purpose - Recently, as Korean culture and economy develops, Seoul has become a world-famed city. In Seoul, many special grade hotels have been constructed in order to accommodate many tourists from China, Japan and many other Asian countries. And the hotels entered into competition among themselves. Thus many changes are accelerated due to their mutual competition and manpower problems. In this situation, the role of higher officers above all is thought to be very important in order to enhance the management result and to make preparations for the kernel ability of the organization. Research design, data and methodology - This study was intended to verify how the leadership of the higher officers based on trust affects the job satisfaction of employees of the organization. In order to achieve the purpose of this study, some study models and hypotheses have been established through theoretical examinations. The subjects of this study were centered on the constituents of C-Hotel, M-Hotel, and D-Hotel. 200 questionaries were distributed and 190 questionaries were collected and thus the collection ratio was 91 percent. 8 questionaries which were regarded to be insincere or hard to analyzed were excluded. Finally, 182 questionaries were used for analyzing the factors and trust. For the purpose of the verification of hypotheses, structural equation was used. In order to verify the mediating effect of trust between the relationship of emotional leadership and job satisfaction, 'Three-step Mediated Regression Analysis by Baron & Kenny(1986) was utilized. The four hypotheses for this study are as follows: First, emotional leadership will have a meaningful influence on trust in the affirmative. Second, trust will have a meaningful influence on job satisfaction in the affirmative. Third, trust will play a mediating role in the relationship of emotional leadership and job satisfaction. Result - First, the emotional leadership and trust was found to effect a positive effect. Second, the trust and job satisfaction was found on a positive effect on job satisfaction. Third, the emotional leadership and job satisfaction was found to positive effect on job satisfaction. Fourth, the trust in the relationship between emotional leadership and job satisfaction was found that the partial mediating effect. Especially, in the case of the business of hospitality, human services as well as material resources become its keynote, and we can safely say that the degree of dependence toward human resources is very high. Accordingly, the leaders should display their leadership on the basis of abundant emotional and intellectual faculties so that they can grasp, understand and admit the diverse views of value and emotion of the organization constituents and that they can form emotional leadership. On the basis of the analysis results of the verification of hypotheses, some suggestions and uppermost limit of this study have been presented for further study.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.10
• /
• pp.374-383
• /
• 2019

This study was conducted to investigate the relationship between sleep quality and depression level of male workers in the manufacturing industry. The survey subjects were 856 male workers in the manufacturing industries in D city. Data collection was conducted through a self-administrated questionnaire survey during the period from March 1 to April 30, 2019. The distribution of depressive level among subjects differed significantly according to various variables of sociodemographic characteristics, health related behaviors and job related characteristics. In addition, the distribution of the depressive group was significantly higher in the group with worse quality of sleep (PSQI). Depression level showed a significant positive correlation with sleep quality. The risk ratio of the depressed group was significantly higher than that of the sleep quality. The results of this study suggest that the depressive level of male workers in the manufacturing industry is significantly related to the quality of sleep as well as sociodemographic, health related and job related characteristics. Therefore, it is necessary to make efforts to improve sleep quality to reduce the level of depression of workers.

• Journal of the Korean Solar Energy Society
• /
• v.31 no.2
• /
• pp.82-88
• /
• 2011

The artificial increase in the solar intensity incident on solar cells using lenses or mirrors can allow solar cells to generate equivalent power with a lower cost. There are two types of concentration optics for solar energy conversion. One is to use mirrors, and the other is to use Fresnel lenses. The gains that can be achieved with a Fresnel lens or a parabolic mirror are compared. The result showed the gains are comparable and the two configurations were developed competitively. In application areas of Fresnel lenses as solar concentrators, several variations of design were devised and tested. Some PV systems still use commercially available flat Fresnel lenses as concentrators. A convex linear Fresnel lens to improve the concentration ratio and the efficiency is devised and flat linear Fresnel lens in thermal energy collection is utilized. In this study, we designed and optimized flat Fresnel lens and the 'light pipe' to develop 500X concentrated solar PV system. In the process, we compare the transmission efficiencies according to groove types. We performed rigorous ray tracing simulation of the flat Fresnel lenses. The computer aided simulation showed the 'grooves in case' has the better efficiency than that of 'grooves out case'. Based on the ray-trace results we designed and manufactured sample Fresnel lenses. The optical performance were measured and compared with ray-trace results. Finally, the optical efficiency was measured to be above 75%. All the design and manufacturing were performed based on that InGaP/InGaAs/Ge triple junction solar cell is used to convert the photon energy to electrical power. Field test will be made and analyzed in the near future.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.4
• /
• pp.387-397
• /
• 2021

Most of Korea's agricultural water is supplied by reservoirs, so dependence on them is very high. Accordingly, it is important to reduce this dependence and provide a stable agricultural water supply by utilizing an applicable alternative water source. Therefore, in this work, scenarios for different land uses were constructed, and an optimal water supply plan using rainwater and reused sewage water - which are alternative water sources - was created. A study was also conducted to determine the optimal capacity of a rainwater facility. From the analysis, a stable water supply was achieved in the scenario of maximum utilization of rainwater by changing an existing paddy area to a greenhouse area, and about 0.82 ton of flow capacity was required for 1 mm of rainfall on farms utilizing rainwater. As a result of analyzing the optimal scenario to derive the ratio of the storage capacity per unit water collection area, the rainwater storage capacity determined through MODSIM and the storage capacity determined through actual monitoring showed similar results, about 31 and 32 %, respectively, and the optimal capacity of rainwater facilities was calculated to be about 5,796,000-6,182,400 ton.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.506-512
• /
• 2018

The fine dust generated in the home and restaurant business occupies a low ratio of about 4% of the total fine dust emissions. However, at the foodservice business, the rate of change of the pollutant concentration is very high, so that the temporary fine dust concentration can be measured up to 60 times. The pollutants generated from non-industrial combustion plants consist of particulate fine dust and gaseous organic compounds. To remove these pollutants, cleaning dust collection system, which is an effective system for simultaneous removal of gaseous and particulate matter, is applied. This is a method of increasing the probability of diffusion capture of the Brownian motion by pressurized liquid injection method using the atomizing nozzle. The dust removal efficiency of the fine dust collecting system was analyzed by nozzle spraying air pressure condition and angle using the manufactured fine dust removing system. As a result, it was confirmed that the efficiency of removal of fine dust and gaseous organic compounds was more than 90%. The developed system is expected to be highly usable in the future because it can remove particulate dust from the existing plant hood system without any installation cost.

• The Journal of the Korea Contents Association
• /
• v.19 no.2
• /
• pp.409-423
• /
• 2019

The purposes of this study was to confirm the current issues of workforce policy of dental auxiliary personnel in Korea. The literature review and data collection were conducted in terms of the auxiliary personnel supply, regional distribution, legal works, working environment. Despite the rapid increase in the number of dental hygienists, the number of active dental hygienists is less than half of the total, and the dental clinics still experience the shortage. Considering the dental hygienist's work, the available dental auxiliary personnel for the dental assistance is limited. The proportion of dental hygienists is concentrated in large cities, and the ratio of dental clinics composed of only dental hygienists is high. Thus, it is essential to look for a plan to solve the disparity. The criterion for judging the legality of the works is ambiguous because a large portion of dental hygienist's work is not specified in the Medical Technicians Act. The job life is also shortened, and occupational profession and satisfaction are lowered. Thus, job burnout is accelerating. The difference between the legal works and the practiced works of dental hygienist and the conflict between the personnel might be due to the lack of utilization plans for the dental personnel at the government level. Therefore, the government should establish the roles of dental hygienist in accordance with the demands of the dental health service, institutionalize the necessary policies accordingly, and make efforts to establish plans to improve the relevant laws and utilize the manpower appropriately.

• Korean Journal of Ichthyology
• /
• v.31 no.2
• /
• pp.67-76
• /
• 2019

This study was conducted from 2017 to 2018 to determine habitat aspects of Acheilognathus signifier, an endangered species reintroduced (2010~2012) to Heukcheon Stream, a tributary of the Hangang River, Korea. A total of 329 individuals were collected in 2017 (two surveys) and 723 individuals were collected in 2018 (four surveys) at about 5 km habitat area, including the discharge station. A. signifier's habitat was about 0.4 to 1.2 meters deep in slow water flow upstream of the discharge area. It was a place with many boulders and cobbles. The spawning period was estimated from April to June in terms of spawning behavior and collected juvenile size. Sex ratio of females (438) and males (412) was 1 : 0.94. Estimated age of A. signifier based on their total length distribution during the spawning period (April) indicated that 1-, 2-, 3-year old groups and more than 4-year-old group were 32~43 mm, 50~61 mm, 62~75 mm, and 76~89 mm, respectively. Age-specific composition costs differed depending on the timing of the collection. They were relatively high in the order of first-year (juvenile)>third-year> and fourth-year or higher, showing a stable age structure. Thus, A. signifier reintroduced to Heukcheon Stream has successfully settled down and formed a stable population, showing a tendency to proliferate.

• Therapeutic Science for Rehabilitation
• /
• v.10 no.3
• /
• pp.97-110
• /
• 2021

Objective : This study aimed to develop evaluation items based on Parten's social play developmental stages to measure social play in preschool children. Methods : Through a literature review, the investigation items according to Parten's social play developmental stages were collected. Two Delphi surveys were conducted using 22 expert panels. An understanding of the contents of the preliminary items was determined via parents of preschool children. The evaluation method was established through an expert advisory meeting. Results : Through data collection and the Delphi survey, a total of 89 items were drawn, including 12 unoccupied behaviors, 7 onlooker behaviors, 14 solitary play, 16 parallel play, 17 associative play, and 23 cooperative play items. The average content validity ratio of the Delphi survey was 0.85. The stability was 0.15. The consensus was 0.78. The final preliminary evaluation items comprised a total of 40 items, including 17 for associative play and 23 for cooperative play. Conclusion : An evaluation items that can measure social play in preschool children was developed, and its content validity was verified. It is expected to be used as an evaluation tool in clinical practice.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.10 no.3
• /
• pp.293-299
• /
• 2022

Recently, various stakeholder are interested in microplastic to cause pollution of the marine's ecosystem and effort to conduct study of product's life cycle to reduce pollution of marine's ecosystem. The micorplastic refer to materials of the nano- to micro- sized units and it can be classified into primary and secondary. The primary microplastic mean the manufactured for use in the specific field such as the microbead of the cosmetic or cleanser. also, secondary mean the unintentionally generated during use of the product such as the textile crumb by the doing the laundry. Tire and Road Wear Particles(TRWPs) are also defined as secondary microplastic. Typically, TRWPs are created by friction between the tread compound's rubber of the tire and the surface of the road du ring the driving cars. Most of the generated TRWPs exist on the roadside and some of them were carried to marine by the rainwater. In this study, we perform the quantitative analysis of the TRWPs existed in fine dust at the roadside. So, we collected the dust from the roadside in Chungcheongnam-do's C site with a movement of 1,300 cars per the hour. The collected samples were separated according to size and density. And shape analysis was performed using the Scanning Electron Microscope(SEM). We were possible to discover a lot of TRWPs at the fine dust of the 100 ± 20 ㎛. And we analysis it u sing the Thermo Gravimetric Analysis(TGA) and Gas Chromatography/Mass Spectrometer(GC/MS) for the quantitative components from the tire. As a result, it was confirmed that TRWPs generated from the roadside fine dust were included the 0.21 %, and the tire and road components in the generated TRWPs consisted of the 3:7 ratio.