• International Journal of Oral Biology
• /
• v.34 no.3
• /
• pp.157-164
• /
• 2009

We recently described a novel animal model of trigeminal neuropathic pain following compression of the trigeminal ganglion (Ahn et al., 2009). In our present study, we adapted this model using male Sprague-Dawley rats weighing between 250-260 g and then analyzed the behavioral responses of these animals following modified chronic compression of the trigeminal ganglion. Under anesthesia, the rats were mounted onto a stereotaxic frame and a 4% agar solution ($10{\mu}L$) was injected in each case on the dorsal surface of the trigeminal ganglion to achieve compression without causing injury. In the control group, the rats received a sham operation without agar injection. Air-puff, acetone, and heat tests were performed at 3 days before and at 3, 7, 10, 14, 17, 21, 24, 30, 40, 55, and 70 days after surgery. Compression of the trigeminal ganglion produced nociceptive behavior in the trigeminal territory. Mechanical allodynia was established within 3 days and recovered to preoperative levels at approximately 60 days following compression. Mechanical hyperalgesia was also observed at 7 days after compression and persisted until the postoperative day 40. Cold hypersensitivity was established within 3 days after compression and lasted beyond postoperative day 55. In contrast, compression of the trigeminal ganglion did not produce any significant thermal hypersensitivity when compared with the sham operated group. These findings suggest that compression of the trigeminal ganglion without any injury produces prolonged nociceptive behavior and that our rat model is a useful system for further analysis of trigeminal neuralgia.

• Proceedings of the Microbiological Society of Korea Conference
• /
• 2007.05a
• /
• pp.80-82
• /
• 2007

We have isolated numerous cold deep-sea adapted microorganisms (piezophilic, formerly referred to as "barophilic" bacteria) using deep-sea research submersibles. Many of the isolates are novel psychrophilic bacteria, and we have identified several new piezophilic species, i.e., Photobacterium profundum, Shewanella violacea, Moritella japonica, Moritella yayanosii, Psychromonas kaikoi, and Colwellia piezophila. These piezophiles are involving to five genera in gamma-Proteobacteria subgroup and produce significant amounts of unsaturated fatty acids in their cell membrane fractions to maintain the membrane fluidity in cold and high-pressure environments. Piezophilic microorganisms have been identified in many deep-sea bottoms of many of the world oceans. Therefore, these microbes are well distributed on our planet. One of the isolated deep-sea piezophiles, Shewanella violacea strain DSS12 is a psychrophilic, moderately piezophilic bacterium from a sediment sample collected at the Ryukyu Trench (depth: 5,110 m), which grows optimally at 30 MPa and $8^{\circ}C$ but also grows at atmospheric pressure (0.1 MPa) and $8^{\circ}C$. We have examined this strain to elucidate the molecular basis for gene regulation at different pressure conditions because this strain is useful as a model bacterium for comparing the various features of bacterial physiology under pressure conditions. In addition, we completed the sequencing of the entire genome of this piezophilic bacterium and we expect that many biotechnologically useful genes will be identified from the genome information.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.3 no.4
• /
• pp.220-237
• /
• 2001

Over the 20th century global temperature increase has been 0.6$^{\circ}C$. The globally averaged surface temperature is projected to increase by 1.4 to 5.8$^{\circ}C$ over the period 1990 to 2100. Nearly all land areas will have higher maximum temperature and minimum temperature, and fewer cold days and frost days. More intense precipitation events will take plate over many areas. Over most mid-latitude continental interiors will have increased summer continental drying and associated risk of drought. By 2100, if the annual surface temperature increase is 3.5$^{\circ}C$, we will have 15.9$^{\circ}C$ from 12.4$^{\circ}C$ at present. Also the annual precipitation will range 1,118-2,447 mm from 972-1,841 mm at present in Korea. Consequently the average crop periods for summer crops will be 250 days that prolonged 32 days than at present. In the case of gradual increase of global warming, an annual crop can be adapted to the changing climate through the selection of filial generations in breeding process. The perennial crops such as an apple should be shifted the chief producing place to northern or high latitude areas where below 13.5$^{\circ}C$ of the annual surface temperature. If global warming happens suddenly over the threshold atmospheric greenhouse gases, then all ecosystems will have tremendous disturbance. Agricultural land-use plan, which state that farmers decide what to plant, based on their climate-based advantages. Therefore, farmers will mitigate possible negative imparts associated with the climate change. The farmers will have application to use agricultural meteorological information system, and agricultural long-range weather forecast system for their agroecosystems management. The ideal types of crops under $CO_2$ increase and climate change conditions are considered that ecological characteristics need indispensable to accomplish the sustainable agriculture as the diversification of genetic resources from yield-oriented to biomass-oriented characteristics with higher potential of $CO_2$ absorption and primary production. In addition, a heat-and-cold tolerance, a pest resistance, an environmental adaptability, and production stability should be also incorporated collectively into integrated agroecosystem.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.11 no.1
• /
• pp.1-5
• /
• 1991

Tall fescue(Festuca amndinacea Schreb.) is a productive pasture grass that is widely adapted to the soil and climate of Korea. It is regarded, however, as relatively low in palatability and nutritive value. On the other hand, Italian ryegrass(lo1ium rnultz$om Lam.) is highly nutritious and palatable, but is essentially weak in cold tolerance. Numerous investigators have succeeded in producing hybrids between Lolium spp. and Festuca spp. but no improved varieties have resulted. Therefore, intergeneric hybridization of Italian ryegrass with tall fescue is employed in 1984 to improve the adaptive and cold resistance quality of Italian ryegrass. In the mean time, F1-hybrid plants obtained by crossing Italian ryegrass x tall fescue were observed in open field. The results are summarized as follows: 1. Leaf-size and silica cell hair were intermediate between the types of parents but the shape of auricle tended to show Italian ryegrass and auricle-cilia to show tall fescue. 2. Roots of $F_1$-hybrid plants were mainly distributed at top soil and did not produced florescence material. 3. Head type of hybrids was intermediate between the types of parents but ray length was somewhat less than the length of tall fescue ray. Typical Italian ryegrass or tall fescue-like phenotypes were not observed. 4. Anthers of $F_1$-hybrid plants were formed but pollen were not formed. Even though pollen were formed, they were all empty. 5. Hybrid plants were more winterhardy and summer persistency than Italian ryegrass. They showed a equivalent growth to Italian ryegrass in spring and to tall fescue in summer. 6. Chromosome of $F_1$-hybrids was allopolyploid(2n=4~=28) and all $F_1$-hybrid plants were sterile.

• Korean Chemical Engineering Research
• /
• v.53 no.4
• /
• pp.524-529
• /
• 2015

This study was conducted to optimize the medium composition for cold-adaptive protease production of Enterobacteriaceae sp. by response surface methodology (RSM). Yeast extract, and TritonX-100 were identified as the significant factors affecting protease from one-factor-at-a-time method. RSM studies for optimizing protease production of Enterobacteriaceae sp. have been carried out for three parameters including yeast extract concentration, TritonX-100 concentration, and culture pH. These significant factors were optimized as 6.690 g/L yeast extract, 0.018 g/L Triton$^{TM}$ X-10, and pH 6.677. The experimentally obtained protease activity was 8.03 U /L, and it became 1.5-fold increase before optimization.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.9
• /
• pp.15-23
• /
• 2020

Spline is a machine component using transmits rotating energy with grooves on internal of boss and external periphery of shaft. Internal spline is generally produced by machining process. However, to reduce manufacturing cost and save time, plastic deformation process such as backward extrusion is gradually adapted for spline production. In plastic deformation process, forming load, stress on tools and flow flaws should be taken into account to have sound products. For this purpose, kinematically admissible velocity fields for Upper Bound Method in backward extrusion of internal spline has been suggested, then forming load and relative pressure have been calculated. Internal spline forming experiments have been con-ucted under hydraulic press and the calculated forming load well predicts the load of experiment.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.5
• /
• pp.31-36
• /
• 2010

SAI(Secondary Air Injection) system has been studied widely as one of the promising countermeasure for reducing HC emission at cold start. In this paper, in order to find out the optimal position of SAI, computational thermal fluid analysis on exhaust system adapted SAI system is performed using commercial 3-D CFD code, CFX. The present results showed that SAI position strongly affected the uniformity of air distribution in front of catalyst. And also through the decision process of optimal position of SAI, new index, uniformity of air distribution($U_{\phi}$) is proposed to define it quantitively. Because $U_{\phi}$ is very simple equation and similar with flow uniformity, it is very easy to figure out the physical meaning and to apply it to practices. Finally, we applied the index $U_{\phi}$ to the decision process of the optimal position of SAI, so that we could get the clear comparison results.

• Journal of Microbiology and Biotechnology
• /
• v.28 no.9
• /
• pp.1502-1510
• /
• 2018

Organic solvent-tolerant (OST) enzymes are widely applied in various industries for their activity and stability in organic solvents, for their higher substrate solubility, and for their greater stero-selectivity. However, the criteria for identifying OST enzymes largely remain undefined. In this study, we compared the amino acid composition of 19 OST esterases with that of 19 non OST esterases. OST esterases have increased the ratio of Ala and Arg residues and decreased the ratio of Asn, Ile, Tyr, Lys, and Phe residues. Based on our amino acid composition analysis, we cloned a carboxylesterase (EstSP2) from a psychrophilic bacterium, Sphingomonas glacialis PAMC 26605, and characterized its recombinant protein. EstSP2 is a substrate specific to p-nitrophenyl acetate and hydrolyzed aspirin, with optimal activity at $40^{\circ}C$; at $4^{\circ}C$, the activity is approximately 50% of its maximum. As expected, EstSP2 showed tolerance in up to 40% concentration of polar organic solvents, including dimethyl sulfoxide, methanol, and ethanol. The results of this study suggest that selecting OST esterases based on their amino acid composition could be a novel approach to identifying OST esterases produced from bacterial genomes.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.103-103
• /
• 2017

Vigorous root growth at the seedling stage in dry direct-seeded conditions is considered as a critical trait because it is involved in seedling emergence, early vegetative vigour, nutrient uptake as well as drought tolerance. In this study, we performed QTL mapping using the recombinant inbred lines obtained from the cross between Tongil-type Dasan and temperate japonica TR22183 (DT-RILs) to identify QTL underlying early root development. TR22183, which was previously reported to have high nitrogen utility and cold tolerance, showed vigorous root growth at the seedling stage in semi-drought conditions. Root length, fresh weight and dry weight of TR22183 were significantly higher than in Dasan. By QTL analysis with genotyping-by-sequencing method, we identified two QTLs for root fresh weight (RFW) in chromosome 7 and root dry weight (RDW) in chromosome 8, explaining phenotypic variances of 13.5% and 10.6%, respectively. These QTLs would be used to develop rice varieties adapted to direct-seeded cultivating system.

• Transactions of Materials Processing
• /
• v.4 no.3
• /
• pp.214-221
• /
• 1995

In the paper, we have proposed a new method to determine the initial billet for the forged products using a function approximation in the neural network. The architecture of neural network is a three-layer neural network and the back propagation algorithm is employed to train the network. By utilizing the ability of function approximation of a neural network, an optimal billet is determined by applying the nonlinear mathematical relationship between the aspect ratios in the initial billet and the final products. The amount of incomplete filling in the die is measured by the rigid-plastic finite element method. The neural network is trained with the initial billet aspect ratios and those of the unfilled volumes. After learning, the system is able to predict the filling regions which are exactly the same or slightly different to the results of finite element simulation. This new method is applied to find the optimal billet size for the plane strain rib-web product in cold forging. This would reduce the number of finite element simulation for determining the optimal billet size of forging product, further it is usefully adapted to physical modeling for the forging design.