• Journal of Bio-Environment Control
• /
• v.29 no.1
• /
• pp.62-72
• /
• 2020

The purpose of this study was to investigate the quality characteristics of ripe fruit based on harvest date and to examine the ripening phase of 'Seolhyang' strawberry suitable for room temperature, cold-chain, and low temperature distribution. The strawberries were harvested six times between December 20 to May 9. The appropriate maturity of strawberries is characterized by the firmness of approximately 2.9-3.0 N, and SSC remained above 8.6 °Brix until March and declined after April. The quality index values that determine the maturity stage of strawberries should be red color, Hunter a value ranging from 32 to 37, and hue angle of 36-45℃. For the after-ripening experiment, the progression rate of the ripening stage determined based on strawberry color was 10%/day at room temperature, 5%/day at 10-12℃, and 3%/day at 5℃. Thus, strawberries should be harvested at 80% coloring stage for distribution at room temperature and at least 90% for low temperature storage to maintain the merchantability. Besides, strawberries harvested at 70% coloring stage at room temperature and strawberries harvested below 80% coloring stage at low temperatures below 5℃ had lost commercial value before reaching 100% coloring stage.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.08a
• /
• pp.356-365
• /
• 1999

The present study is aimed at developing the TRIP(transformation induced plasticity) aided high strength low carbon steel using reversion process. An excellent combination of elongation over 40% and tensile strength abut 100kgf/$\textrm{mm}^2$ achieved in processing of 0.15C-0.5 Si-6Mn steel by slow heating to intercritial temperature region and accelerated cooling into room temperature. This good combination is caused by TRIP phenomena of retained austenite in steels during deformation. The stability of retained austenite is very important for the good ductility and it depends on the diffusion of carbon and manganeses during heat treatment. The accelerated cooling after holding at annealing temperature retards the formation of pearlite and provides the carbon enrichment in retained austenite in steel, resulting in the increase in elongation of the cold-rolled TRIP steel. On the other hand, heat treating the steel at 600$^{\circ}C$ for 5 hour before cold rolling increases elongation but reduces the amount of retained austenite after reversion processing. It is accounted that the heat treating is effective for the increase in the stability of retained austenite.

• Progress in Superconductivity and Cryogenics
• /
• v.15 no.4
• /
• pp.6-9
• /
• 2013

Korea Superconducting Tokamak Advanced Research (KSTAR) has a helium refrigeration system (HRS) with the cooling capacity of 9 kW at 4.5 K. Main cold components are composed of 300 tons of superconducting (SC) magnets, main cryostat thermal shields, and SC current feeder system. The HRS comprises six gas storage tanks, a liquid nitrogen tank, the room temperature compression sector, the cold box (C/B), the 1st stage helium distribution box (DB#1), the PLC base local control system interconnected to central control tower and so on. Between HRS and cold components, there's another distribution box (DB#2) nearby the KSTAR device. The entire KSTAR device was constructed in 2007 and has been operated since 2008. This paper will present the maintenance result of the KSTAR HRS during the campaign and discuss the operation record and maintenance history of the KSTAR HRS.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.19 no.3
• /
• pp.292-301
• /
• 2012

Purpose: The purpose of the study was to evaluate the effects of postoperative oral care using cold therapy on nausea, vomiting and oral discomfort after laparoscopic myomectomy. Method: The study was conducted with an experimental group (n=29) and a control group (n=35) sampled from patients admitted to a women's hospital in a metropolitan city in Korea. Data were collected between October 10, 2011 and January 31, 2012 and analyzed using Chi-square, Fisher's exact test, t-test, and repeated measure ANCOVA with SPSS/WIN 19.0. Results: After the intervention, postoperative nausea (p<.001) and oral discomfort for patients in the experimental group were significantly lower than in the control group. There were significant differences in the presence of vomiting between both groups at 12 hours (p<.001) and 24 hours (p=.003) after leaving the recovery room. Conclusion: Oral care using cold therapy was found to be an effective nursing intervention for reducing postoperative nausea, vomiting and oral discomfort up to 24 hours after recovery in patients with laparoscopic myomectomy.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.4
• /
• pp.333-342
• /
• 2004

Tensile and low cycle fatigue (LCF) tests on prior cold worked 316L stainless steel were carried out at various temperatures from room temperature to 650$^{\circ}C$. At all test temperatures, cold worked material showed the tendency of higher strength and lower ductility compared with those of solution treated material. The embrittlement of material occurred in the temperature region from 300$^{\circ}C$ to 600$^{\circ}C$ due to dynamic strain aging. Following initial cyclic hardening for a few cycles, cycling softening was observed to dominate until failure occurred during LCF deformation, and the cyclic softening behavior strongly depended on temperature and strain amplitude. Non-Masing behavior was observed at all test temperatures and hysteresis energy curve method was employed to describe the stress-strain hysteresis loops at half$.$life. The prediction shows a good agreement with the experimental results.

• Journal of Chest Surgery
• /
• v.34 no.10
• /
• pp.797-799
• /
• 2001

Open heart surgery with hypothermia in patients with cold agglutinin can cause severe complications by hemolysis and hemagglutination of red blood cells. A 41 year-old male patient with mitral stenosis was admitted due to fever and cough. After antibiotics treatment, he was scheduled to undergo mitral valve replacement. In the operation room, we found agglutination of blood cardioplegia during lowering temperature of cardioplegia. And then, the cardioplegia was changed to warm cardioplegia and the operation was performed under normothermia due to the suspicion of the cold reactive protein. The operation was performed uneventfully. Postoperatively, cold agglutinin was confirmed by immunochemistry of the patient\`s serum.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.12
• /
• pp.6013-6021
• /
• 2012

Although there are many patients who suffer from cold hypersensitivity and have a difficult time in living daily lives due to feeling cold at room temperature, it is about true that an accurate diagnostic method and an effective remedy for a cold hypersensitivity have not been developed yet. Therefore, in order to develop traditional medicine equipment for cold hypersensitivity, we have designed new oxygen chamber system which can diagnose cold hypersensitivity with multiple bionic sensors and supply a patient optimum amount of oxygen adaptively to the extent of their illness. In particular, diverging from conventional diagnosis based on the experience of doctor and subjective statements of patient, we introduced accurate method for diagnosis in comparing between output of multiple sensors and threshold derived from clinical trials. After all, the proposed oxygen chamber system will contribute to achieving scientific evidence and manufacturing of korean traditional medicine.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2003.04a
• /
• pp.196-201
• /
• 2003

When the structures are used in cold regions, the mechanical properties and dimension stability of the blade will be changed. The proposal of this study is to test the durability of the structures in cold regions. It is necessary to select the most comfortable materials and fabrication processes for more stable structures in cold regions. To select the most comfortable materials and processes, the static strength has to know through the tensile static tests at the severe condition as cold regions. First, the tensile static specimens made by RIM (Resin injection molding) process & vacuum bagging process with reinforcement materials and resin. Tensile static tests were carried out on three laminate lay-ups (carbon prepreg, carbon fiber dry fabric) at different test temperature($24^{\circ}C$, $-30^{\circ}C$), determining properties such as the mechanical strength, stiffness and strain to failure. At different test temperature, in order to test the tensile strengths of these specimens used the low temperature chamber. Next, the results of this test were compared with each other. Finally, the most comfortable materials and fabrication processes can select based on these results. The results show the changes in the static behavior of three laminate lay-ups at different test temperatures. At low temperatures, the static strengths are higher than the ones at room temperature.

• Applied Microscopy
• /
• v.28 no.1
• /
• pp.21-38
• /
• 1998

The present study was performed to determine the effect of cold stress on myocardium of aging rat. Control groups, which aged 6, 12 and 24 months, were compared with age-matched experimental groups that were exposed to moderate cold stress for a hours daily in a week at laboratory cold room $(4{\pm}1^{\circ}C)$. The histological, histochemical and ultrastructural changes of myocardium were observed. The results were summarized as follow: 1. Age-dependent histological change of control groups was observed the formation of contraction band in 24months aged group. The experimental groups submitted to cold stress showed a similar change pattern as seen in control groups. However, the degree of change in the experimental groups was significantly larger than that of control groups. In the 34 months aged group the formation of hypercontraction band was observed. 2. Regarding age-dependent histochemical changes of control groups, we observed the increase activities of PAS and Masson's trichrome. In experimental groups the activities of PAS and Masson's trichrome were also increased with age. Compare with control group, the activities of PAS was increased but the activities of Masson's trichrome was decreased. 3. Age-dependent ultrastructural changes on vacuolization, lysosome were observed. In control groups the structural changes occur at 12 months. The accumulation of lipofuscin, contraction band, hypercontraction band and a component of connective tissue were observed in 24 months. However, the degree of change in the experimental groups was significantly larger than that of control groups. In contract, the myelin body in intercalated discs was observed in 24 months of experimental groups.

• Transactions of Materials Processing
• /
• v.27 no.6
• /
• pp.370-378
• /
• 2018

Cold forging, carried out at room temperature, leads to high dimensional accuracy and excellent surface integrity as compared to other forging methods such as warm and hot forgings. In the cold forging process, WC-Co (Tungsten Carbide-Cobalt) alloy is the mainly used material as a core dies because of its superior hardness and strength as compared to other structural materials. For cold forging, die life is the most significant factor because it is directly related to the manufacturing cost due to periodic die replacement in mass production. To investigate die life of WC-Co alloy for cold forging, mechanical properties such as strength and fatigue are essentially necessary. Generally, uniaxial tensile test and fatigue test are the most efficient and simplest testing method. However, uniaxial tension is not efficiently application to WC-Co alloy because of its sensitivity to alignment of the specimen due to its brittleness and difficulty in thread machining. In this study, shape of specimen, tools, and testing methods, which are appropriate for uniaxial tensile test for WC-Co alloy, are proposed. The test results such as Young's modulus, tensile strength and stress-strain curves are compared to those in previous literature to validate the proposed testing methods. Based on the validation of test results it was concluded that the newly developed testing method is applicable to other cemented carbides like Titanium carbides with high strength and brittleness, and also can be utilized to carry out fatigue tests for further investigation on die life of cold forging.