• Journal of the Korean Magnetics Society
• /
• v.9 no.4
• /
• pp.190-195
• /
• 1999

The crystallographic and magnetic properties of the system of $Fe_{1-x}Co_x$(x=0.2 and 0.4) prepared by microwave arc-melting with the maximum power of 3.5 kW and a iron-foil with thickness of 25 ${\mu}{\textrm}{m}$ have been studied by the methods of X-ray diffraction and the measurement of the magnetic hysteresis using the vibrating sample magnetometer at room temperature. The samples were prepared in three different ways: First, pellet form pressed under the pressure of 9,000 N/$\textrm{cm}^2$. Second, the sheet cold rolled. Third, thin sheet treated with the temperature of 90$0^{\circ}C$. The X-ray diffraction pattern of the sample prepared by the first method shows that the crystal structure of the sample is bcc as same as that of Fe with a good uniformity. The iron-foil has the coercivity of 43 Oe and the initial slope of magnetization of 0.328 emu/gOe. The coervicity and magnetization of the sample prepared by the second method increased as the Co content increased. But the initial slop of the magnetization decreased as the Co content increased. This means that the displacement of domain wall is suppressed by the increases of coercivity as the Co content increased. The saturation magnetization of the samples made by the third method increased. On the other hand, the coercivity of these samples decreased. The increase of saturation magnetization of the samples seems to be related to the changes in X-ray intensity after heat treatment. Also some magnetic parameters of the samples were calculated by using a simple model and compared with other values.

• Korean Journal of Materials Research
• /
• v.3 no.1
• /
• pp.43-49
• /
• 1993

Excellent deep drawability and strain aging rsistance are obtained by the addition of alloying elements such as Ti and Nb which can form carbide and nitride easily into Al killed extra low carbon steel. Recrystallization textures and mechanical properties of the three different extra low carbon steels with B containing Nb only, Ti only, and both Nb and Ti, respectively, along with have been compared. Inverse pole figure shows that (100) and (111) texture intensities of Nb containing steel changed a lot during the annealing treatment and the degree of texture-structural change in the steel containing both Nb and Ti is about the same as that in the Ti-containing 5teel. After annealing the pole figure shows that the {Ill} < 110 > and {112} < 110> textures are the strongest in the cold rolled state and the annealed state, respectively. However, there is little difference in texture structure among the three kinds of steels. There is a tendency that the steel containing both Nb and Ti the grain size of which is the smallest is the highest in hardness. Nb-containing steel is the next and Ti -containing steel is the last in hardness.

• Journal of Welding and Joining
• /
• v.30 no.2
• /
• pp.59-64
• /
• 2012

Welding is an essential process in the automotive industry. Most welding processes that are used for auto body are spot welding and $CO_2$ welding are used in a small part. In production field, $CO_2$ welding process is decreased and spot welding process is increased due to welding quality is poor and defects are occurred in $CO_2$ welding process frequently. But $CO_2$ welding process should be used at robot interference parts and closed parts where spot welding couldn't. Because of the 0.65mm ~ 2.0mm thickness steel sheet were used in the automotive industry, poor quality of welding area such as burn through and under fill were happened frequently in $CO_2$ process. In this paper, we will study about the penetration depth which gives a huge impact on burn through changing a degree of base metal, welding position and torch angle. Voltage, current and welding speed were fixed but degree of base metal, welding position and torch angle were changed. And Cold- Rolled(CR) steel sheet was used. Penetration depth was analysed by multiple regression analysis to derive approximate calculations. And reliability of approximate calculations were confirmed through additional experiments. As the results of this research, we confirmed the effect of torch and plate angle to bead shape. And we present a possibility that can simulate more accurate to weld geometry, as deduced the verification equations that has tolerance of less than 21.69%.

• Journal of Korean Society of Steel Construction
• /
• v.16 no.1 s.68
• /
• pp.33-42
• /
• 2004

Making use of SN steel in the building structure should be a prerequisite to adopt the design strength of said steel. As a preceding study, the material properties of STKN400B/490B tubes and SPAP235/325 and SPAR295 square pipes manufactured using SN400B/490B plates were evaluated. Compared with the yield and ultimate strengths of SN400B/490B plates, those of STKN400B/490B tubes increase. Nonetheless, the yield and ultimate strengths of STKN400B/490B tubes satisfied the design codes of STKN400B/490B tubes even though the tubes were fabricated via roll bending or press forming. On the other hand, the yield and ultimate strengths at the edges of SPAP235/325 square pipes did not satisfy the design codes based on the values at the sides. The maximum tensile and compressive residual stresses at the SN490B tube were equal to and 40% of the yield strength of the SN490B plate, respectively, In the case of the SPAP325 square pipe, both the maximum tensile and compressive residual stresses were 80% of the yield strength of the SN490B plate. The axial compressive loaded column test results snowed that the buckling strengths were not very different regardless of the mode of fabrication of STKN490B tunes. i.e., through roll bending or press forming. On the other hand, the buckling strength of the SPAP325 square pipe was higher than that of the built-up square pipe.

• Journal of the Microelectronics and Packaging Society
• /
• v.10 no.3
• /
• pp.29-35
• /
• 2003

The Sn-based lead-free solders with varying microstructure were prepared by changing the cooling rate from the melt. Bulky as-cast SnAg, SnAgCu, and SnCu, alloys were cold rolled and thermally stabilized before the creep tests so that there would be very small amount of microstructural change during creep (TS), and thin specimens were water quenched from the melt (WQ) to simulate microstructures of the as-reflowed solders in flip chips. Cooling rates of the WQ specimens were 140∼150 K/sec, and the resultant $\beta-Sn$ globule size was 5∼10 times smaller than that of the TS specimens. Subsequent creep tests showed that the minimum strain rate of TS specimens was about $10_2$ times higher than that of the WQ specimens. Fractographic analyses showed that creep rupture of the TS-SnAgCu specimens occurred by the nucleation of voids on the $Ag_3Sn$ Sn or $Cu_6Sn_5$ particles in the matrix, their subsequent growth by the power-law creep, and inter-linkage of microcracks to form macrocracks which led to the fast failure. On the other hand, no creep voids were found in the WQ specimens due to the mode III shear rupture coming from the thin specimens geometry.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.8
• /
• pp.857-863
• /
• 2012

In this study, tailor-welded blanks(TWB) were formed between high-strength steel(SABC1470) and cold rolled steels(SPFH590 and SPFC980) to improve passenger safety and reduce the weight of cars. Multi-material TWB specimens were highly strengthened through the heat treatment of SABC1470. The change in tensile strength caused by the stand-by time until water cooling after stamping and the deformation behavior of high-speed bending in a statically indeterminate condition such as in the center-pillar were evaluated. Multi-material TWB specimens that were heat-treated at the same temperature tended to show a decrease in tensile and yield strength, depending on the stand-by time until water cooling. On the other hand, Multi-material TWB specimens(SABC1470+SPFH590) that were heat treated at $850^{\circ}C$ showed good properties that were suitable for ensuring passenger safety in car accidents. From the viewpoint of passenger safety, it is best to use SABC1470 and SPFH590 in the upper and lower area of the center-pillar, respectively.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.110-110
• /
• 2016

금속재료 중 철강은 기계적 성질이 우수하고 대량생산에 의한 뛰어난 경제성을 가지기 때문에 다양한 산업 분야에서 널리 사용되고 있다. 그러나 스테인리스강 등과 같은 일부 특수한 용도의 강을 제외하고는 부식 환경에 취약하기 때문에 그 용도에 따라 표면처리를 함으로서 내식특성을 부여하고 있다. 일반적으로 이러한 철강재료에 대한 부식문제를 해결하기 위한 방법으로는 습식프로세스 중 아연(Zn)도금이 사용되는데, 아연은 그 자체가 보유하고 있는 차폐(barrier)효과는 물론 상대적으로 이온화 경향이 크기 때문에 철에 대하여 전자를 공급하는 희생양극적(Sacrificial anode)역할을 하여 철을 방식하는 원리를 가지고 있다. 하지만 최근에 이르러 기존의 도금 프로세스 처리된 제품의 사용 및 적용분야가 확대되고 가혹해 짐에 따라서 내식성 향상을 위한 새로운 재료 및 신기술 개발이 요구되고 있는 실정이다. 본 연구에서는 친환경 프로세스 방법인 PVD법 중 하나인 스퍼터링(Sputtering)을 이용하여 0.8mm 두께의 냉연강판 (cold rolled steel) 상에 Al에 대한 Mg 함량을 10~30wt.%로 하여 약 $5{\mu}m$ 두께의 막을 제작하였다. 이때 20wt.% 막의 경우 공정압력조건을 증가시켜 증착 막의 결정배향성을 변화시켰다. 뿐만 아니라 제작된 막들에 대해서 $400^{\circ}C$온도에서 10분간 열처리함으로서 코팅막의 성분변화에 따른 영향을 살펴보기 위해 시편을 추가 제작하였다. 이와 같이 제작된 막들에 대한 형성메커니즘과 내식성의 상관관계 해명을 위해 막의 조성분포, 표면 및 단면의 모폴로지 관찰 및 결정구조 등 재료특성분석과 더불어 염수분무(Salt spray test), 침지시험 그리고 양극분극 시험 등을 통해 내식성 평가를 진행하였다. 이상의 종합적인 결과를 살펴보면 제작된 Al-Mg 막은 마그네슘 함량비 및 열처리 조건에 따라 조성분포와 막의 모폴로지 및 결정배향성이 변화한다는 것을 알 수 있었는데, 마그네슘 함량이 증가하고 열처리한 막의 내식성이 가장 양호한 것으로 나타났다. 이것은 Al-Mg 성분이 표면을 중심으로 균일 분산-분포하며, Al에 대한 Mg의 고용으로 인해 안정적으로 형성된 부식생성물과 금속화합물의 단계적 반응 효과에 의해 차폐효과와 희생양극적 특성이 동시에 향상되었기 때문으로 생각된다. 한편 공정 압력을 증가시켜 형성한 막은 결정학적 구조에서 보다 높은 표면 에너지와 증가한 격자 정수에 의해 Mg이 부식환경에서 빠르게 반응하여 안정적 피막을 형성하기 때문에 내식성이 향상된 것으로 보여 진다. 이상의 연구를 통해서 고내식성을 Al-Mg막의 유효성 확인하였으며, 설계에 대한 기초적인 응용지침을 제시할 수 있을 것으로 사료된다.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.2
• /
• pp.209-216
• /
• 2019

Objective: We compare the effects of three different approved sources of supplemental zilpaterol on growth-performance responses and carcass characteristics of finishing lambs. Methods: Twenty four Pelibuey${\times}$Katahdin lambs ($46.75{\pm}2.43kg$) were used in a 33-day feeding trial. Lambs were fed a dry rolled corn-based finishing diet. Treatments consisted of the non-supplemental basal diet (Control) versus the basal diet supplemented with 125 mg zilpaterol/kg of diet (as fed basis) from three commercial sources marketed in Mexico: Zilmax (ZIL), Grofactor, and Zipamix. Results: Compared to controls, zilpaterol (ZH) supplementation did not affect dry matter intake (DMI), but increased carcass adjusted daily weight gain (ADG, 36.7%), gain efficiency (34.2%), and dietary net energy (26.0%), and decreased (23.4%) the ratio of observed:expected DMI. Compared to controls, supplemental ZH increased hot carcass weight (6.4%), dressing percentage (3.2%), m. longissimus thoracis (LM) area (15.6%), and shoulder muscle:fat ratio (28.7%), but decreased kidney-pelvic-heart fat, and fat thickness. Supplemental ZH increased 10.9% and 14.3% whole cut weight of loin and leg, respectively, and the proportion (as percentage of cold carcass weight) of leg (4.3%). These increases were reflected in greater forequarter and hindquarter weights. Lambs fed ZH increased (4.6%) empty body weight (EBW) and reduced (14.7%) liver/spleen weight (as g/kg EBW). Likewise, ZH supplementation tended (p = 0.08) to lower (8.9%) visceral fat. Growth performance, energetic efficiency, hot carcass weight, dressing percentage, LM area and whole cuts were not different across supplemental ZH sources. However, compared with non-supplemented controls, only ZIL appreciably decreased carcass fat distribution, including fat thickness, percentage kidney pelvic and heart fat, shoulder fat, and visceral fat. Conclusion: Supplemental ZH increases ADG, gain efficiency, carcass dressing percentage, and LM area. The magnitude of these responses was similar among ZH sources. Nevertheless, compared with non-supplemented controls, only ZIL appreciably decreases carcass fat. The basis for this is uncertain, but indicative that some practical differences in zilpaterol bio-equivalency may exist across commercial sources tested.

• Journal of Food Hygiene and Safety
• /
• v.15 no.2
• /
• pp.61-67
• /
• 2000

Bacteriological quality evaluations were carried out for rice rolled in laver(Kimbab), Hamburger, Walnut cake and chinese noodle (Jajangmyun), which were on sale in April and May 1995, in May and July 1997 and in January 1999, at 20 different resting places on Kyung-Bu, Ho-Nam, Joong-Bu and Young-Dong Highway in Korea. Food poisoning bacteria were not detected. However numerous coliform bacteria were dectected saying that the sanitary condition of foods on sale at resting places of the highways was not hygienic. There exited 8.8$\times$10$^{4}$~6.6$\times$10$^{5}$ cells/g of coliform bacteria in all the Kimbab sold in 1995. As for Hamburger, 1.8$\times$10$^{2}$~4.7$\times$10$^{4}$ cells/g of coliform bacteria proliferated in all the samples. In 1997,E. coli was found in 16 cases and 21 cases respectively out of 22 Kimbab samples, Hamburger dealing at 7 resting places out of 14 were contaminated with 1.7$\times$10$^{2}$~1.9$\times$10$^{7}$ cells/g of coliform bacteria and Hamburgers dealing at 2 resting places were infected by 5. coli. In contrast to the Kimbab and Hamburger, all the 6 Walnut cake samples were free from the microbial pollution exhibitory that their hygienic condition was satisfactory. 3 samples out of 6 Jajangmyun were contaminated by 7.1$\times$10$^{2}$~2.0$\times$10$^{3}$ cells/g of coliform bacteria, but E. coli was not detected. Compared Kimbab sold in 1995 and 1997 with 1999, Kimbab sold in it can be said that hygienic control fur Kimbab should be performed more strictly during hot season than during cold season. Walnut cake was the safest against microbial contamination, followed by Jajangmyun, Hamburger and Kimbab in decreasing order, indicating that foods with mixed ingredients such as Kimbab and Hamburger were more susceptible to microbial infection, so that a more systematic safety control is needed for such foods during cooking, processing and distribution.