• 한방안이비인후피부과학회지
• /
• 제21권2호
• /
• pp.39-45
• /
• 2008

Objective : Skin barrier protects skin against harmful environment. Its function includes antimicrobial barrier as well as physical barrier. But there are few studies about the factors which improve skin barrier recovery after injury. The aim of this study is to investigate the factors which improve skin barrier recovery. Method : Nine hairless mice was anesthetized by inhalation and we tape stripped them. We used thermometer to know temperature one day ago, before anesthesia, before tape stripping, and after tape stripping. Vapometer was used to know transepidermal water loss before tape stripping, after tape stripping. And we used doppler flowmeter to measure blood flow before tape stripping, after tape stripping. Result : After analyzed data, we concluded that temperature was lower after anesthesia than before anesthesia and after tape stripping than before tape stripping. We could know that transepidermal water loss was lower after tape stripping than before tape stripping and more blood flowed after tape stripping. Conclusion : In our study, it was observed that temperature, transepidermal water loss, blood flow changed after tape stripping. But we thought lowered temperature was pathologic situation, more blood flow was to recover after injury. In traditional korean medicine, cold(寒) and imbalance of blood flow(血行) don't only make many skin diseases, but cold(寒) also obstructs blood flow. So we need to study how to warm cold(寒) and improve blood flow.

• 한국항공우주학회지
• /
• 제38권10호
• /
• pp.985-991
• /
• 2010

노즐 목 근처에 설치된 핀틀 형상이 노즐 내부 유동과 추력에 미치는 영향을 공압 실험으로 고찰하여 제시하였다. 핀틀 이동으로 노즐 목 면적이 감소하면 연소실 압력은 부드럽게 상승하나 추력은 핀틀 형상에 따라 증가 패턴이 다르게 나타났다. 동일한 노즐 목과 연소실 압력 조건에서 추력은 전체적으로 핀틀 형상이 오목한 것 보다는 볼록한 것이 컸다. 노즐 벽면 압력과 핀틀에 작용하는 하중은 핀틀 형상은 물론 핀틀 위치 및 노즐 목면적에 따라 큰 차이를 보였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2009년도 춘계학술대회 논문집
• /
• pp.37-40
• /
• 2009

본 연구에서는 케로신/과산화수소 점화용 분사기의 설계/제작하여 분무특성에 관한 연구를 수행하고자 하였으며, 이에 앞서 촉매점화방식으로 적용할 때 가장 적합한 분사기를 설계하고자 하였다. 설계/제작된 분사기를 수류시험을 통해 질량 유량 및 분산각을 측정하였다. 그 결과 케로신의 목표 질량유량(12.88 g/s)은 설계 차압과 같은 차압인 3 bar에서 측정되었으며, 이 때 분산각은 $40^{\circ}$을 확인하였다. 또한 과산화수소의 목표 질량 유량(94.39 g/s)은 설계 차압(3 bar) 보다 작은 1 bar에서 측정됨을 확인하였다.

• Nuclear Engineering and Technology
• /
• 제46권3호
• /
• pp.395-406
• /
• 2014

This study provides a fundamental understanding of a cold finger melt crystallization technique by exploring the heat and mass transfer processes of cold finger separation. A series of experiments were performed using a simplified LiCl-CsCl system by varying initial CsCl concentrations (1, 3, 5, and 7.5 wt%), cold finger cooling rates (7.4, 9.8, 12.3, and 14.9 L/min), and separation times (5, 10, 15, and 30 min). Results showed a potential recycling rate of 0.36 g/min with a purity of 0.33 wt% CsCl in LiCl. A CsCl concentrated drip formation was found to decrease crystal purity especially for smaller crystal formations. Dimensionless heat and mass transfer correlations showed that separation production is primarily influenced by convective transfer controlled by cooling gas flow rate, where correlations are more accurate for slower cooling gas flow rates.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 제3회 압연심포지엄 논문집 압연기술의 미래개척 (Exploitation of Future Rolling Technologies)
• /
• pp.150-157
• /
• 1999

As the customer demands thickness quality stricter, new techniques of automatic thickness control(AGC), is adopted to continuous cold rolling mills. The cold rolling mills of Pohang Works have revamped the existing conventional AGC system that control the thickness at all-stands automatically by the mass flow AGC based on the measurement of strip-speed and thickness between mill stands. The No. 2 Cold Rolling Mill be has adopted the New AGC system since Oct. 1995, and The No.1 Cold Rolling Mill since June. 1999. Thanks to the New AGC system, precise control of thickness is possible not only at constant rolling speed region, but also during line speed up and down. This report describes application techniques of the New AGC system and performance of the system.

• Journal of the korean society of oceanography
• /
• 제33권3호
• /
• pp.41-52
• /
• 1998

A seasonal circulation pattern in the eastern Yellow Sea (EYS) is suggested from the water mass analysis and geostrophic calculation using the hydrographic data collected by National Fisheries Research and Development Institute during the years of 1970 to 1990. This research focuses on the presence of inflow of warm (and saline) waters into EYS in summer. EYS is divided into two regions in this paper: the west coast of Korea (WCK) and the central Yellow Sea (CYS). In CYS, waters are linked with warm waters near Cheju Island in winter, but with cold waters from the north in summer (in the lower layer). It is not simple to say about WCK because of the influences of freshwater input and tidal mixing. Nevertheless, water mass analysis reveals that along WCK, waters have the major mixing ratios (40-60%) of warm waters in summer, while the dominant mixing ratios (50-90%) of cold waters in winter. Such a seasonal change of water mass distribution can be explained only by seasonal circulation. In winter, warm waters flow northward into CYS and cold waters flow southward along WCK. In summer, warm waters flow northward along WCK and cold waters flow southward into CYS. This circulation pattern is supported by both statistical analysis and dynamic depth topography. Accordingly, Yellow Sea Warm Current may be defined as the inflow of warm waters to CYS in winter and to WCK in summer.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2009년도 제33회 추계학술대회논문집
• /
• pp.97-100
• /
• 2009

한국형 발사체용 액체로켓엔진을 개발하기 위한 75톤급 연소기 기술검증 시제를 제작하여 수류시험 및 점화시험을 수행하였다. 기존의 연소기에 새롭게 도입된 기술인 점화, 막냉각, 산화제 선공급방식을 반영하기 위해 시험설비를 수정 및 개량하였다. 산화제 및 연료 수류시험을 통해 공급라인, 점화기 라인, 연소기의 수력학적 특성, 추진제 충전시간을 파악하여 점화순서를 결정하였다. 점화 cyclogram을 통해 점화기의 점화시험을 성공적으로 수행하였으며, 향후 연소시험을 위한 기초 자료를 습득하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제34회 춘계학술대회논문집
• /
• pp.25-28
• /
• 2010

한국항공우주연구원에서는 30톤급 액체로켓엔진 연소기 개발 기술을 바탕으로 설계 제작된 75톤급 기술검증시제의 수류시험 및 점화시험을 수행하였다. 수류시험을 통해 시험설비 공급라인의 수력학적 특성 및 냉각 케로신 충전시간을 파악하였다. 수류시험 결과로 점화절차를 결정하여, 점화시험을 성공적으로 수행하였다. 점화시험을 통해 획득한 자료와 시험 기법은 향 후 연소시험을 위해 활용될 것이다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제34회 춘계학술대회논문집
• /
• pp.61-65
• /
• 2010

초저온 추진제를 사용하는 액체로켓용 인젝터의 개발을 위해서는 단일 인젝터의 수류/연소시험을 통해 인젝터의 수력학적 특성 및 혼합, 미립화 등의 분무특성에 대한 연구가 필수적이다. 본 연구에서는 대학실험실 급에서 운용할 수 있는 범위의 가압식 초저온 추진제 공급장치 및 LabVIEW를 이용한 Cyclogram 제어 및 데이터 수집장치 등을 구축하였다. 제작된 시험장치를 이용하여 스월-동축인젝터의 $LN_2-GN_2$ 초저온 수류시험 및 분무 가시화를 수행하였다. 또한 LOX-$GCH_4$ 추진제 조합의 연소시험을 위한 연소기와 추력대를 설계 및 제작하였다.

• 대한기계학회논문집
• /
• 제18권5호
• /
• pp.1227-1234
• /
• 1994

A cold spot temperature control system for the batch annealing furnace has been established in order to reduce energy consumption which is essential to improve productivity and stabilize the properties of products. A relationship between annealing cycle time and gas flow rate is developed and also for the variation of coil cold spot temperature with time during heating, and actual temperature measurements at mid-width of each coil during soaking. The results of the temperature variation effect on the cold rolled steel sheet batch annealing are as follows. (1) Cooling rate increasing gradually with increasing atmospheric gas flow, but heating rate is hardly increasing without atmospheric gas component change. (2) In case of short time heating, the slowest heating part is the center of B coil and in case of ling time heating, the low temperature point moves from the center of coil to inside coil. (3) The outside of top coil is the highest temperature point under heating, which becomes the lowest temperature point under cooling. (4) Soaking time determination depends on the input coil width, and soaking time for quality homogenization of 1214 mm width coil must be 2 hours longer than that of 914 mm width coil.