• 한국자동차공학회논문집
• /
• 제15권1호
• /
• pp.64-70
• /
• 2007

Raising exhaust gas temperature during cold-start period is very crucial to improve emission performance of SI engines because it enhances the performance of catalyst in the early stage of engine start. In this study, control variables such as ignition timing, idle speed actuator(ISA) opening and fuel injection duration were extensively investigated to analyze variations in exhaust gas temperature and engine stability during cranking period. Experimental results showed that spark timing affected engine stability and exhaust gas temperature but the effects were small. On the other hand, shortened injection duration and increased ISA opening led to a significant increase in exhaust gas temperature. Under such conditions, increase in cranking time was also observed, showing that it becomes harder to start the engine. Based on these observations, a pseudo fuel-air ratio, defined as a ratio of fuel injection time to degree of ISA opening, was introduced to analyze the experimental results. In general, decrease in pseudo fuel-air ratio raised exhaust gas temperature with the cost of stable and fast cranking. On the contrary, an optimal range of the pseudo fuel-air ratio was found to be between 0.3 to 0.5 where higher exhaust gas temperatures can be obtained without sacrificing the engine stability.

• 한방안이비인후피부과학회지
• /
• 제14권2호
• /
• pp.207-223
• /
• 2001

The Wonyenaejang is equivalent to the (senile)cataract in western medicine. The word cataract is used to describe the natural lens that has turned cloudy. As the natural lens of the eye becomes cloudy, it does not allow light to pass through it. Cataracts usually start as a slight cloudiness that progressively grows more opaque. As the cataract becomes more mature(increasingly opaque and dense), the retina receives less and less light. The light that does reach the retina becomes increasingly blurred and distorted. This causes gradual impairment of vision. If left untreated, cataracts can cause needless blindness. Although there are many kinds of cataracts, a senile cataract is the most common one. We chose the oriental medicine textbooks and the oriental medicine journals that were dealing with the symptoms, etiology, and internal/external treatments. The results were as follows : 1. The main causes of this disease are weak liver and kidney, burning up of the wind and heat in the liver and gall, weak spleen and stomach. 2. As the internal treatment of the Cataract, Geegukjihwangtang is mostly prescribed. 3. As the external treatment of the Cataract, (l) In the field of medicine for external application is commonly prescribed (2) In the field of drug action, frequently used treatments are as follows. emission of the evil, alleviation of fever, removal of lump of blood, and the medicine for external applications. (3) In the field of four Qi, cold medicine is commonly prescribed. (4) In the field of five tastes, bitter/hot/sweet mdicine are commonly prescribed. (5) In the field of toxicity, non-togic medicine is commonly prescribed. (6) In the field of channel distribution, most of the medicine belong to liver channel.

• 한국습지학회지
• /
• 제25권4호
• /
• pp.291-296
• /
• 2023

철강산업의 산 회수설비에서 발생하는 염화수소 가스를 처리하기 위하여 마이크로버블을 발생할 수 있는 습식스크러빙 장치(DIWS)가 도입되었다. 산 회수 설비에서 발생하는 염소가스는 수소 가스와 결합하여 염화수소 가스의 농도를 50% 정도 증가시켰다. DIWS장치에 염소 제거를 위한 Na₂S₂O₃를 투입한 이후의 유입수 염화수소 가스 농도는 13.1 ~13.4 ppm, 유출수는 1.5~1.7 ppm이었고, 제거율은 87.5~88.8%로 안정되게 유지하였다. DIWS는 대기배출기준을 안정적으로 만족함에 따라 현장 적용에 적용할 수 있는 공정으로 판단된다.

• 대한화학회지
• /
• 제45권4호
• /
• pp.341-350
• /
• 2001

자동차 Oil cooler용 호스를 구성하는 클로로폴리에틸렌(CPE) 고무재료의 내열 및 난연성을 향상시키기 위하여 수산화알루미늄을 내열 및 난연제로 제조한 배합고무의 가황틀성, 물리적 성질, 내열성, 난연성을 조사하였으며, 실험결과로부터 고무와 난연제의 최적배합조건을 도출하였다. 고무시편을 제조하는데 사용된 고무재료는 화학적 내식성과 내한성이 우수하면서도 가격이 저렴한 클로로폴리에틸렌 고무를 사용하였으며, 내열 및 난연제로서는 알루미늄 표면 처리과정에서 발생되는 에칭부산물을 분쇄와 정제를 거쳐 가공한 수산화알루미늄을 사용하였고, 분말은 XRD(X-ray diffraction), PSA(Particle Size Analysis), SEM(Scanning Electron Microscopy) 및 ICP-AES(Inductively Coupled Plasma-Atomic Emission Spectroscopy)로 입자의 상, 크기, 분포, 형태 및 성분을 분석한 후 CPE 고무재료와 0∼80 phr범위에서 훈련하였다. CPE배합 고무의 경도, 인장강도, 신장율, 인장응력 및 열적특성을 분석한 결과, 고무재료규격을 초과하지 않는 범위 내에서 최대의 내열 및 난연효과를 주는 수산화알루미늄의 첨가량은 40 phr로 나타났으며, 이 배합비에서 클로로폴리에틸렌의 난연성은 3배 향상되었다.

• 환경위생공학
• /
• 제7권2호
• /
• pp.1-10
• /
• 1992

Since 1960's along with industrialization and urbanization, economic growth has been . achieved, however, at the same time, environmental condition has been seriously deteriorated. . Currently, volume of wastewater has been increasing at annual rate of 7% in sewage and 20% in industrial wastewater. However, the nation's sewage treatment serves only 33% of the municipal wastewater as of 1991. Major portion of air pollutants comes from combustion of oil and coal which comprise 81% of total energy use and emission gases from motor vehicles increasing at an accelerated rate. It is known that Korea generates the highest amount of waste per capta. Nevertheless, it is not sufficient to reduce the volume of waste by means of resources recovery and recycling. Recognizing the importance of global environmental problems such as ozone layer depletion, global warming and acid rain, international society has been making various efforts since the 1972 Stockholm conference. In particular, it is expected that the Rio conference which has adopted the Rio declaration and Agenda 21 will form a crucial turning point of the emerging new world order after the Cold War confrontation. To cope with such issues as domestic pollution and global environmental problems, the fundamental national policy aims at harmonizing "environmental protection and sustainable development". The Ministry of Environment has recently set up a mid-term comprehensive plan which includes annual targets for environmental protection. According to the government plan, gradual improvement of various environmental conditions and specific measures to achieve them is planned in time frame. Additional sewage treatment plants will be constructed in urban areas with the target to treat 65% of the nation's municipal sewage by 1996. Supply of clean fuels such as LNG will also be expanded starting from large cities as a cleaner substitute energy for coal and oil. In parallel with expansion of LNG, emphasis will be placed on installation of stack monitoring system. Due to the relatively limited land, government's basic policy for solid waste treatment is to develop large scale landfill facilities rather than small sized ones. Thirty three regional areas have been designated for the purpose of waste management. For each of these regions, big scale landfill site is going to be developed. To increase the rate of waste recycling the government is planning to reinforce separate collection system and to provide industries with economic incentives. As a part of meeting the changing situation on global environmental problems after UNCED, and accommodation regulatory measures stipulated in the global environmental conventions and protocols, national policy will try to alter industrial and economic structure so as to mitigate the increasing trends of energy consumption, by encouraging energy conservation and efficiency. In this regard, more attention will be given to the policy on the development of the cleaner technology. Ultimately, these policies and programs will contribute greatly to improving the current state of national public health.

• 한국포장학회지
• /
• 제29권1호
• /
• pp.51-57
• /
• 2023

이 연구에서는 고압 균질기를 통해 제작된 CNF 수 분산액을 PLA에 적용시키는데 있어 비용과 생산 효율성을 고려하여 동결 건조 방식이 아닌 오븐 건조를 통해 수분을 제거한 ODCNF를 제조하였다. 건조 후 고형화된 CNF 분말을 생분해성 고분자인 PLA에 접목시켜 압출, 사출 공정에서 발생하는 전단응력으로 재분산을 유도하였고, 성공적으로 시편이 만들어졌다. 제작된 시편에 대하여 진행된 전계방사 전자현미경 측정을 통해 셀룰로오스 입자가 PLA 매트릭스 내에 함침되어 있는 것을 확인하였다. 또한 시차주사열량계 측정에서 ODCNF가 PLA에 적용되었을 때 결정화도 상승과 냉 결정화 온도가 앞당겨지는 것을 확인하였다. 그리고 냉각 과정에서 결정이 생성되는 것을 통해 실제 생산 공정에 적용할 경우, 친환경 핵제로써 역할을 수행할 수 있을 것으로 판단하였다. 추가적으로 유변물성 측정기를 통해 첨가된 ODCNF가 PLA의 점도를 과도하게 증가시키지 않아 기존 공정 조건에 그대로 적용할 수 있음을 확인하였고, 이는 제작된 시편을 통해서도 알 수 있었다. 동적 점탄성 특성에서는 첨가된 ODCNF 입자의 필러 효과와 향상된 결정화도로 인해 유리상과 고무상에서 모두 저장 탄성율의 비율이 PLA에 비해 높게 유지되는 것으로 밝혀졌다. 이러한 연구결과를 바탕으로 대량 생산이 가능하고, 생산단가를 낮춘 ODCNF를 이용하여 CNF/PLA 기반의 100% 생분해성 복합재 개발이 가능할 것으로 기대된다.

• 한국가스학회지
• /
• 제27권3호
• /
• pp.52-58
• /
• 2023

지구 기상이변에 대해 탄소중립의 중요성이 대두됨에 따라 무탄소 연료인 수소의 에너지원으로서의 활용도 역시 증대되고 있다. 일반적으로 수소는 연료전지(FC, Fuel Cell)에 활용되고 있으나, 이는 연소를 기반으로 하는 내연기관(ICE, Internal Combustion Engine)에도 활용될 수 있다. 특히 연료전지만으로 수소 활용 및 인프라 확장이 어려운 때에 이미 생산 측면이나 공급 측면에서 인프라가 기 구축되어 있는 내연기관은 수소 에너지 저변 확대에 큰 도움을 줄 수 있다. 다만 수소를 연소기반으로 활용할 경우 고온에서 공기 중 질소가 산소와 반응하여 유해배기물질인 질소산화물(NOx, Nitrogen Oxides)이 생성될 수 있는 단점은 존재한다. 특히 냉간 (Cold Start) 운전 영역시 포함될 EURO-7 배기규제의 경우 워밍업(Warm-up) 과정에서 발생하는 배기배출물의 저감을 위한 노력도 필요하다. 따라서 본 연구에서는 2 L급 수소 직접분사방식 전기점화 (SI, Spark Ignition) 엔진을 활용하여 냉각수를 상온에서 88 ℃로 워밍업하는 과정에서 질소산화물 및 연료소모율의 변화 특성을 살펴보았다. 특히 수소는 기존의 가솔린, 천연가스, 액화석유가스(LPG, Liquified Petroleum Gas)와 달리 가연범위(Flammable range)가 넓기 때문에 공기과잉률(Excessive air ratio)을 희박하게 조절할 수 있다는 장점이 있다. 이에 본 연구에서는 워밍업하는 과정에 있어서 공기과잉률을 1.6/1.8/2.0으로 변화하여 그 결과를 분석하였다. 본 실험의 결과는 워밍업 시 공기과잉률이 희박해질수록 시간당 질소산화물의 배출이 적고, 열효율도 상대적으로 높으나 최종 온도까지 도달 시간이 길어짐에 따라 누적 배출량 및 연료소모율은 악화될 수도 있음을 시사한다.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1992년도 춘계학술대회
• /
• pp.27-47
• /
• 1992

Engineers have developed new instruments that aid in diagnosis and therapy Ultrasonic imaging has provided a nondamaging method of imaging internal organs. A complex transducer emits ultrasonic waves at many angles and reconstructs a map of internal anatomy and also velocities of blood in vessels. Fast computed tomography permits reconstruction of the 3-dimensional anatomy and perfusion of the heart at 20-Hz rates. Positron emission tomography uses certain isotopes that produce positrons that react with electrons to simultaneously emit two gamma rays in opposite directions. It locates the region of origin by using a ring of discrete scintillation detectors, each in electronic coincidence with an opposing detector. In magnetic resonance imaging, the patient is placed in a very strong magnetic field. The precessing of the hydrogen atoms is perturbed by an interrogating field to yield two-dimensional images of soft tissue having exceptional clarity. As an alternative to radiology image processing, film archiving, and retrieval, picture archiving and communication systems (PACS) are being implemented. Images from computed radiography, magnetic resonance imaging (MRI), nuclear medicine, and ultrasound are digitized, transmitted, and stored in computers for retrieval at distributed work stations. In electrical impedance tomography, electrodes are placed around the thorax. 50-kHz current is injected between two electrodes and voltages are measured on all other electrodes. A computer processes the data to yield an image of the resistivity of a 2-dimensional slice of the thorax. During fetal monitoring, a corkscrew electrode is screwed into the fetal scalp to measure the fetal electrocardiogram. Correlations with uterine contractions yield information on the status of the fetus during delivery To measure cardiac output by thermodilution, cold saline is injected into the right atrium. A thermistor in the right pulmonary artery yields temperature measurements, from which we can calculate cardiac output. In impedance cardiography, we measure the changes in electrical impedance as the heart ejects blood into the arteries. Motion artifacts are large, so signal averaging is useful during monitoring. An intraarterial blood gas monitoring system permits monitoring in real time. Light is sent down optical fibers inserted into the radial artery, where it is absorbed by dyes, which reemit the light at a different wavelength. The emitted light travels up optical fibers where an external instrument determines O2, CO2, and pH. Therapeutic devices include the electrosurgical unit. A high-frequency electric arc is drawn between the knife and the tissue. The arc cuts and the heat coagulates, thus preventing blood loss. Hyperthermia has demonstrated antitumor effects in patients in whom all conventional modes of therapy have failed. Methods of raising tumor temperature include focused ultrasound, radio-frequency power through needles, or microwaves. When the heart stops pumping, we use the defibrillator to restore normal pumping. A brief, high-current pulse through the heart synchronizes all cardiac fibers to restore normal rhythm. When the cardiac rhythm is too slow, we implant the cardiac pacemaker. An electrode within the heart stimulates the cardiac muscle to contract at the normal rate. When the cardiac valves are narrowed or leak, we implant an artificial valve. Silicone rubber and Teflon are used for biocompatibility. Artificial hearts powered by pneumatic hoses have been implanted in humans. However, the quality of life gradually degrades, and death ensues. When kidney stones develop, lithotripsy is used. A spark creates a pressure wave, which is focused on the stone and fragments it. The pieces pass out normally. When kidneys fail, the blood is cleansed during hemodialysis. Urea passes through a porous membrane to a dialysate bath to lower its concentration in the blood. The blind are able to read by scanning the Optacon with their fingertips. A camera scans letters and converts them to an array of vibrating pins. The deaf are able to hear using a cochlear implant. A microphone detects sound and divides it into frequency bands. 22 electrodes within the cochlea stimulate the acoustic the acoustic nerve to provide sound patterns. For those who have lost muscle function in the limbs, researchers are implanting electrodes to stimulate the muscle. Sensors in the legs and arms feed back signals to a computer that coordinates the stimulators to provide limb motion. For those with high spinal cord injury, a puff and sip switch can control a computer and permit the disabled person operate the computer and communicate with the outside world.

• Asian-Australasian Journal of Animal Sciences
• /
• 제17권11호
• /
• pp.1615-1634
• /
• 2004

A review was undertaken to obtain information on the sustainability of pig free-range production systems including the management, performance and health of pigs in the system. Modern outdoor rearing systems requires simple portable and flexible housing with low cost fencing. Local pig breeds and outdoor-adapted breeds for certain environment are generally more suitable for free-range systems. Free-range farms should be located in a low rainfall area and paddocks should be relatively flat, with light topsoil overlying free-draining subsoil with the absence of sharp stones that can cause foot damage. Huts or shelters are crucial for protecting pigs from direct sun burn and heat stress, especially when shade from trees and other facilities is not available. Pigs commonly graze on strip pastures and are rotated between paddocks. The zones of thermal comfort for the sow and piglet differ markedly; between 12-22$^{\circ}C$ for the sow and 30-37$^{\circ}C$ for piglets. Offering wallows for free-range pigs meets their behavioural requirements, and also overcomes the effects of high ambient temperatures on feed intake. Pigs can increase their evaporative heat loss via an increase in the proportion of wet skin by using a wallow, or through water drips and spray. Mud from wallows can also coat the skin of pigs, preventing sunburn. Under grazing conditions, it is difficult to control the fibre intake of pigs although a high energy, low fibre diet can be used. In some countries outdoor sows are fitted with nose rings to prevent them from uprooting the grass. This reduces nutrient leaching of the land due to less rooting. In general, free-range pigs have a higher mortality compared to intensively housed pigs. Many factors can contribute to the death of the piglet including crushing, disease, heat stress and poor nutrition. With successful management, free-range pigs can have similar production to door pigs, although the growth rate of the litters is affected by season. Piglets grow quicker indoors during the cold season compared to outdoor systems. Pigs reared outdoors show calmer behaviour. Aggressive interactions during feeding are lower compared to indoor pigs while outdoor sows are more active than indoor sows. Outdoor pigs have a higher parasite burden, which increases the nutrient requirement for maintenance and reduces their feed utilization efficiency. Parasite infections in free-range pigs also risks the image of free-range pork as a clean and safe product. Diseases can be controlled to a certain degree by grazing management. Frequent rotation is required although most farmers are keeping their pigs for a longer period before rotating. The concept of using pasture species to minimise nematode infections in grazing pigs looks promising. Plants that can be grown locally and used as part of the normal feeding regime are most likely to be acceptable to farmers, particularly organic farmers. However, one of the key concerns from the public for free-range pig production system is the impact on the environment. In the past, the pigs were held in the same paddock at a high stocking rate, which resulted in damage to the vegetation, nutrient loading in the soil, nitrate leaching and gas emission. To avoid this, outdoor pigs should be integrated in the cropping pasture system, the stock should be mobile and stocking rate related to the amount of feed given to the animals.

• 한국의학물리학회지:의학물리
• /
• 제7권1호
• /
• pp.65-77
• /
• 1996

본 연구는 2-D 와 3-D 호프만 뇌 모형 ,3-D 제젝 모형, 그리고 단일광자방출전산화단층촬영을 이용하여 인공산물을 일으키는 요인중 자료 획득 요소, 감쇠, 잡음, 산란 그리고 재구성 방식이 영상에 미치는 영향을 분석, 평가하였다. 자료 획득 요소 중 섬광 카메라의 회전 각도와 반경을 각각 변화시키면서 영상을 획득하였다. 이때 회전 반경의 변화가 작을수록 더 우수한 질의 영상을 얻을 수 있었고 회전중심으로부터 반경이 짧을수록 영상이 더 우수하였으며 이는 모형에서 거리가 멀어질수록 조준기의 분해능이 떨어지기 때문이다. 제젝 모형에서 균일한 부위를 각 조준기에 대해 알맞는 감쇠계수를 찾는데 이용하였다. $^{99m}$ Tc 을 사용했을 때 각 조준기에 대해 가장 알맞는 감쇠계수는 모두 0.12$cm^{-1}$ /로 나타났으며, 이 값으로 각각의 영상에 대해 감쇠 보정을 해주었다. 감쇠 보정 전의 제젝 모형의 균일한 부위는 감쇠로 인해 움푹 패인 선 프로파일 모양을 나타내었고, 감쇠 보정을 해줌으로서 평행한 선 프로파일을 얻을 수 있었다. 또한 감쇠 보정을 해줌으로서 영상의 질을 개선할 수 있었다. 각 시간에 따른 잡음의 영향을 관찰하기 위해 1분, 2분, 5분, 10분, 20분에 대하여 각각 자료를 얻었다. 결과에서 1분 영상이 잡음의 영향을 가장 많이 받아 영상의 질이 나빴으며 반면에 20분 영상은 잡음의 영향을 적게 받아 영상의 질이 상대적으로 가장 좋았다. 이는 자료 획득 시간을 길게하여 계수되는 양을 늘려줌으로서 Poisson 분포를 따르는 방사능 분포의 통계적 오차를 줄일 수 있기 때문인 것으로 생각한다. 이중-에너지 창, 즉 산란 부분과 $^{99m}$ Tc 의 봉우리 에너지인 140KeV 중심 20% 에너지 구별 영역을 각각 설정한 후, 자료를 얻어 산란 보정 전과 후의 영상을 비교하였다. 제젝 모형의 경우 냉구 부위와 바 패턴 부위가 산란 보정 이전에 비해 산란 보정 이후가 더 잘 식별되었고, 3-D 호프만 뇌모형의 경우 산란 보정후 영상의 질이 더 우수하게 나타났다. 결론적으로 SPECT 영상이 자료 획득을 위한 매개변수, 감쇠, 잡음, 산란 그리고 재구성 방식에 많은 영향을 받는 것으로 나타났으며 임상 적용시 유용한 SPECT 자료를 얻기 위해서 이러한 인자들을 최적화 또는 보정해 주어야 할 것으로 생각된다.