• Journal of Astronomy and Space Sciences
• /
• v.29 no.1
• /
• pp.23-31
• /
• 2012

Thermal analysis and control design are prerequisite essential to design the satellite. In the space environment, it makes satellite survive from extreme hot and cold conditions. In recent years CubeSat mission is developed for many kinds of purpose. Triplet Ionospheric Observatory (TRIO)-CubeSat for Ion, Neutral, Electron, MAgnetic fields (CINEMA) is required to weigh less than 3 kg and operate on minimal 3 W power. In this paper we describe the thermal analysis and control design for TRIO-CINEMA mission. For this thermal analysis, we made a thermal model of the CubeSat with finite element method and NX6.0 TMG software is used to simulate this analysis model. Based on this result, passive thermal control method has been applied to thermal design of CINEMA. In order to get the better conduction between solar panel and chassis, we choose aluminum 6061-T6 for the material property of standoff. We can increase the average temperature of top and bottom solar panels from $-70^{\circ}C$ to $-40^{\circ}C $ and decrease the average temperature of the magnetometer from $+93^{\circ}C$ to $-4^{\circ}C$ using black paint on the surface of the chassis, inside of top & bottom solar panels, and magnetometer.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.299-303
• /
• 2008

In this study, an uncertainty assessment for surface air temperature(T2m) and precipitation(PCP) over East Asia is carried out. The data simulated by the intergovermental Panel on Climate Change (IPCC) Fourth Assessment Report (AR4) Atmosphere-Ocean coupled general circulation Model (AOGCM) are used to assess the uncertainty. Examination of the seasonal uncertainty of T2m and PCP variabilities shows that spring-summer cold bias and fall warm bias of T2m are found over both East Asia and the Korea peninsula. In contrast, distinctly summer dry bias and winter-spring wet bias of PCP over the Korea peninsula is found. To investigate the PCP seasonal variability over East Asia, the cyclostationary empirical orthogonal function(CSEOF) analysis is employed. The CSEOF analysis can extract physical modes (spatio-temporal patterns) and their undulation (PC time series) of PCP, showing the evolution of PCP. A comparison between spatio-temporal patterns of observed and modeled PCP anomalies shows that positive PCP anomalies located in northeastern China (north of Korea) of the multi-model ensemble(MME) cannot explain properly the contribution to summer monsoon rainfalls across Korea and Japan. The uncertainty of modeled PCP indicates that there is disagreement between observed and MME anomalies. The spatio-temporal deviation of the PCP is significantly associated with lower- and upper-level circulations. In particular, lower-level moisture transports from the warm pool of the western Pacific and corresponding moisture convergence significantly contribute to summer rainfalls. These lower- and upper-level circulations physically consistent with PCP give a insight of the reason why differences between modeled and observed PCP occur.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.9
• /
• pp.1101-1105
• /
• 2014

Ocean Thermal Energy Conversion(OTEC) which uses the temperature difference between warm surface sea-water and cold deep sea-water to produce electric power is the promising technology. OTEC is able to be utilized as the $CO_2$ reducing technology by using the consistent temperature differential, while the system efficiency is very low. Thus, the design and development of a efficient turbine is essential to improve the system efficiency for OTEC. In this study, a 100kW-class radial inflow turbine using R32 was designed for OTEC and this turbine's performance was estimated by analysis of CFD. According as the simulation results, turbine's geometry was corrected. The radial inflow turbine satisfying the requirements is designed by the repeated attempts.

• Preventive Nutrition and Food Science
• /
• v.12 no.4
• /
• pp.242-250
• /
• 2007

This study evaluated the storage stability of a variety of sauce products in the Korean market, determined primary quality indices for three typical products, and proposed functional relationships that are useful for determining shelf life at different temperatures. Most of the products examined were found to combine hurdles of low pH, low water activity, and the use of heat processing as methods for producing the required storage stability while maintaining the sensory quality of the products. For a meat extract solution produced for cold noodles (pH=4.3; $a_w=0.98$), the primary quality change determining shelf life was lipid oxidation, determined here by the TBA value. The primary quality index of a soybean paste seasoning mix (pH=4.0; $a_w=0.78$), which had a microbial load of 2.8 log (CFU/g), was a decrease in its pH. The primary quality index for a sandwich spread (pH=4.0; $a_w=0.88$) was changes in its surface color. The temperature dependence of changes in the primary quality indices can be described by the Arrhenius equation, which can estimate the shelf life at any arbitrary limit as a function of temperature. The activation energies for changes in the primary quality indices of the meat extract solution, the soybean paste seasoning, and the sandwich spread were 20.3, 27.2, and 43.5 kJ/mol, respectively.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.11 no.3
• /
• pp.501-508
• /
• 1987

Experimental studies of particle (TiO$\_$2/) deposition from the laminar hot gas particle flow (about 1565K) onto the cold wall surface (about 1215K-1530K) were carried out by the 'real time' laser light reflectivity method (LLRM) and the photographs of scanning electron microscope(SEM). The LLRM was used for the measurement of thermophoretic deposition rates of small particles (d$\_$p/<3.mu.m), and the photographs of SEM were used for determining what factors control the collection of particles having diameters ranging from 0.2 to 30 microns. Two phenomena are primarily responsible for transport of the particles across the laminar boundary layers and deposition: (1) particle thermophoresis (i.e. particles migration down a temperature gradient), and (2) particle inertial impaction, the former effect being especially larger factor of the particle deposition in its size over the range of 0.2 to 1 microns. And also, this study indicates that thermophoresis can be important for particles as large as 15 microns. Beyond d$\_$p/=16.mu.m, this effect diminishes and the inertial impaction is taken into account as a dominant mechanism of particle deposition. The results of present experiments found to be in close agreement with existing theories.

• Journal of the Korean earth science society
• /
• v.39 no.5
• /
• pp.403-418
• /
• 2018

This study conducted synoptic and mesoscale analyses to understand the cause of Japan Tsukuba tornado development, which occurred at 0340 UTC 6 May 2012. Prior to the tornado occurrence, there was a circular jet stream over Japan, and the surface was moist due to overnight precipitation. The circular jet stream brought cold and dry air to the upper-level atmosphere which let strong solar radiation heat the ground with clearing of sky cover. A tornadic supercell developed in the area of potentially unstable atmosphere. Sounding data at Tateno showed a capping inversion at 900 hPa at 0000 UTC 6 May. Strong insolation in early morning hours and removal of the inversion instigated vigorous updraft with rotation due to vertical shear in the upper-level atmosphere. This caused multiple tornadoes to occur from 0220 to 0340 UTC 6 May 2012. When comparing Tateno's climatological temperature and dew-point temperature profile on the day of event, the mid-level atmosphere was moister than typical sounding in the region. This study showed that tornado development in Tsukuba was caused by a combination of (a) topography and potential vorticity anomaly, which increased vorticity over the Kanto Plain; (b) vertical shear, which produced horizontal vortex line; and c) thermal instability, which triggered supercell and tilted the vortex line in the vertical.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.2
• /
• pp.666-671
• /
• 2014

Using positive temperature coefficient (PTC) heater as supplementary heating for diesel engine vehicles with low heat source is a good method to enhance the heating performance during cold start. In this study, the PTC elements were made by using screen printing process for forming ohmic contact layer, and prototype of PTC heater was designed and made for a diesel engine vehicle. In process of designing the PTC heater, the thermal flow analysis of PTC element modules was conducted for verifying the effect of the shapes of contact surface between each of the components (cooling fin, insulator, ceramic element). We also investigated the performance characteristic (heating capacity, energy efficiency, pressure drop) of the PTC heater through the experiments. Therefore, the experimental results indicated that prototype of PTC heater had satisfactory performance. This study will be basis for improving the manufacturing process and increasing the performance of the PTC element and heater.

• Journal of Climate Change Research
• /
• v.2 no.4
• /
• pp.221-235
• /
• 2011

This study summarizes previous studies on the climate change over Korea. Several studies on climate change in the neighboring countries as well as the entire globe are reviewed. Temperature data obtained from modern observational system show an increasing trend beyond the natural variations. The increasing rate of sea surface temperature (SST) over the ocean basins surrounding Korea is higher than that of the global-mean SST. The large increase in the SST over the oceans surrounding Korea may enhance tropical cyclone activity and heavy rainfall frequency in Korea. In addition, it has been reported that the changes in large scale circulation associated with global climate change influence the spatio-temporal variation of monsoon including Changma in summer and cold surges in winter. Although all researches on the subject were not fully discussed in this study due to short period of preparation, allowed pages, and authors' limited knowledge, we expect that this summarized reviews would be helpful to understand climate changes over Korea and the surrounding regions.

• Journal of Environmental Science International
• /
• v.17 no.9
• /
• pp.1053-1068
• /
• 2008

This study aims to produce fundamental database for Environment Impact Assessment by monitoring vertical structure of the atmosphere due to the mountain valley wind in spring season. For this, we observed surface and upper meteorological elements in Sangin-dong, Daegu using the rawinsonde and automatic weather system(AWS). In Sangin-dong, the weather condition was largely affected by mountains when compared to city center. The air temperature was low during the night time and day break, and similar to that of city center during the day time. Relative humidity also showed similar trend; high during the night time and day break and similar to that of city center during the day time. Solar radiation was higher than the city, and the daily maximum temperature was observed later than the city. The synoptic wind during the measurement period was west wind. But during the day time, the west wind was joined by the prevailing wind to become stronger than the night time. During the night time and daybreak, the impact of mountain wind lowered the overall temperature, showing strong geographical influence. The vertical structure of the atmosphere in Dalbi valley, Sangin-dong had a sharp change in air temperature, relative humidity, potential temperature and equivalent potential temperature when measured at the upper part of the mixing layer height. The mixing depth was formed at maximum 1896m above the ground, and in the night time, the inversion layer was formed by radiational cooling and cold mountain wind.

• Journal of Fisheries and Marine Sciences Education
• /
• v.10 no.1
• /
• pp.31-52
• /
• 1998

In this paper, we analyzed the relationships between the fishing ground formation and the sea condition information, surface, mid and bottom layer temperature that is necessary for fishing point selection of angling to catch squid in the East Sea. There was a little differences between temperature measured by every fishing boat on fishing operating and prompt reports of fishing and sea condition about fishing ground formation of angling. And then the result examined by using SST that is a important information of sea condition for the fishing position selection follows as ; We knew, even if the differencs of sea condition each year, SST with a lot of fishing boats was generally within the extnet of $2^{\circ}C$. But the result examined by the limit time about the temperature of mid and bottom layer for the groups of fishing boats not to measure and for the near sea measurement to be done only within EEZ waters follows as ; About the temperature of 50m layer on early in June and July in operating waters of the group of fishing boats, the fishing ground was formed from $10^{\circ}C$ to $12^{\circ}C$ between warm waters and cold waters, afterwards we can seize that the fishing ground was moving to waters from $5^{\circ}C$ to $8^{\circ}C$ at near of polar front. In the coastal waters, we knew that fishing ground is formed to waters from $10^{\circ}C$ to $12^{\circ}C$ at the southern of polar front about the temperature of 50m layer.