• 한국의류학회지
• /
• 제32권10호
• /
• pp.1559-1570
• /
• 2008

Since brought into from the economic life of nomads, the felt, the target of this study, has been developed in various ways of giving the functions of class symbol as well of protection against the cold and of ornamentation. Therefore, the study on how the felt was developed in Joseon Dynasty and how different culture from nomadic tribes it formed is significant in comprehensively under,;landing the economic, social and natural environmental factors in the Dynasty. The felt named "Jeon" has been constantly appearing in Korea from the ancient time, but it was not produced actively in the early part of Joseon Dynasty. That's why it was not a climatic condition suitable for sheep-breeding, and the government managed sheep-breeding but it aimed primarily at not producing clothing materials but having memorial ceremonies. Since sheep-breeding was not widely spreaded, production of Jeon was limited and some part was imported from China, so it was one of rare valuable goods. Therefore, the felt of wools named "Yangmojeon", the colored felt named "Chaejeon", etc. were used as liking items in the high-class society, and their materials and components were a little different depending on the official post. On the other hand, people in the low-class society used to wear the felt hats made of cattle feathers and miscellaneous fur, named "Jeonlip" and "Beougeoji". Since the middle of Joseon Dynasty, use of the felt was divided into two groups according to the users and the function, along with successful spreading of cotton and development of market economy. The function of Jeon to protect against the cold was replaced by cotton, but the felt hats of Beongeoji, Jeonlip, etc. were worn by common people continuously. As seen above, it is considered that the felt culture in Joseon Dynasty was formed very differently from the nomadic culture, because of its historical and sociocultural characteristics, and it had unique developing progress among all available fabrics.

• Ocean and Polar Research
• /
• 제42권2호
• /
• pp.97-113
• /
• 2020

In-situ observations were carried out in April 2015 to investigate the occurrence of water temperature inversion in a region west of Jeju Island. Analysis of in-situ in the western part of Jeju island showed that cold water moved to the southeast from the surface to the middle layer and warm water moved from the middle to the lower layer of the northwest direction. The water temperature inversion occurred at 84 stations (63.1%) out of 133 stations. At the boundary of the water temperature inversion layer, it was formed in the middle layer and disappeared. In the strongly appearing, it started from the middle layer to the lower layer. The shape of the water temperature inversion layer was different. As a result of horizontal water temperature slope analysis of the water temperature inversion zone, maximum 0.23℃/km was obtained and the mean was 0.06℃/km. The role of water temperature inversion as an indicator to determine the formation of water front. As a result of the water mass analysis, Jeju Warm Current Water and Tsushima Warm Current Water of high temperature and high salt intruded from the middle to the bottom. In the middle layer occurred as the Yellow Sea Cold Water of low water temperature and low salinity expanded.

• 소성∙가공
• /
• 제28권3호
• /
• pp.115-122
• /
• 2019

In this paper, finite element analysis of an automatic five-stage precision cold forging process of a yoke, a steering part of a passenger's car, is conducted with emphasis on spring back analysis at the yoke-forming stage and its experimental verification is subsequently made. An elastoplastic finite element method with MINI-element technique employed for the analysis of the entire process is explained. There is emphasis that the thin film of material formed between the punch and die in the stage may result to some errors especially in elastoplastic finite element analysis of spring back due to frequent remeshing. The numerical robustness of the spring back analysis in regards to remeshing is hence shown first through investigation into its effect on the predicted spring back. Experimental measurement of displacement due to spring back is carried out for comparison with the predicted results, and they are in a qualitative agreement with each other.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 추계학술대회 논문집
• /
• pp.230-233
• /
• 2008

Stainless steels are alloy steels with iron as the primary constituent and chromium, nickel, and manganese as principal alloying elements. In addition to automotive, construction, and transportation industries, stainless steels have a variety of applications in the food, chemical, and pharmaceutical industries. Some common products made from stainless steel are sinks, wash basins, kitchen vessels, and cutlery. Among ferritic stainless steels, type 409 can be cold-formed easily and are used for deep-drawn parts such as vessels for the chemical and food industries. In this study, forming analyses and experiments to prevent the occurrence of inferiority such as wrinkles, crack, and neck for automotive muffler part are carried out to save the optimal conditions during forming by modifying the blank size and shape, blank holding force etc.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 C
• /
• pp.1472-1474
• /
• 1997

In this study, the $Nb_3Sn$ wire was tried to fabricate by internal tin process to investigate the relationship between the processing parameters in a cold working and the microstructure. The critical current densities of $Nb_3Sn$ wires were evaluated in magnetic fields at 4.2 K. $Nb_3Sn$ compound layer was found to be formed between Nb core and Cu-Sn. The Cu part in the wire transformed to Cu-Sn by the reaction with Sn and the Sn in the Cu-Sn part reacted with Nb.

• 한국주조공학회지
• /
• 제29권5호
• /
• pp.220-224
• /
• 2009

In order to investigate the microstructural morphology of the sulfide expected from the Fe-FeS phase diagram, a vacuum-sealed quartz tube where pure iron (99.9%) and sulfur (99.99%) powders were charged was heated upto $1000^{\circ}C$ in the electric resistance furnace, held for 96 hours and quenched in cold water and then, rod specimen was produced. Compositional difference of the sulfur between upper and lower parts of the rod was 7.5wt.% and segregation of the sulfur was gradually increased from the lower part to the upper one of the rod. The rod specimen was divided into three parts by the microstructural morphology of the sulfide. The upper part of the rod specimen revealed single phase FeS intermetallic. In the middle part of the specimen, hyper-eutectic microstructure where primary FeS was precipitated first and then, eutectic of $\alpha$-Fe and FeS was formed in the inter-dendritic region of the FeS. Especially, hypo-eutectic microstructure was appeared in the lower part of the specimen. After primary dendrite of $\alpha$-Fe solidified, FeS dendrite which included small amount of $\alpha$-Fe and FeS eutectic in the inter-dendritic region was formed.

• 천문학회보
• /
• 제43권1호
• /
• pp.44.2-44.2
• /
• 2018

G33.92+0.11, classified as a core-halo UC HII region at a distance of 7.1 kpc, contains several sub-clumps (~20-200 solar masses) as identified by dust continuum emission. This source shows very complicated features associated with vigorous massive star-forming activities with a nearly face-on projection. The ambient gas is still accreting to the massive molecular clumps dynamically, while the whole cloud is under disruption by newly formed stars. Using the recent high resolution (< 0.2") ALMA observations, we investigate the detailed structure associated with the star-forming activities by comparing different chemical tracers. The sub-clumps having extremely complex morphologies still preserve cold dense gas together with the turbulent and dense warm gas resulted by newly formed stars and interaction with accreting gas. The accretion of the ambient gas may have occurred episodically to this source. Most recent star formation, which probably the third generation of star formation in this region, is taking place in the northern part (A5 clump). The relatively small mass (~ 1/3 of A1 or A2) and the lack of turbulent gas of this star-forming core may suggest that this core was formed already during the overall collapse of the whole cloud for the first star formation. We think that gravitational collapse of these sub-clumps appears as sequential star formation of this region. The later interaction with accreting gas may have not been a direct cause of the star formation activities of this source.

• 소성∙가공
• /
• 제21권3호
• /
• pp.179-185
• /
• 2012

In this paper, it is proposed to produce high precision screws with a diameter of $800{\mu}m$ and a thread pitch of $200{\mu}m$ ($M0.8{\times}P0.2$) by means of a cold thread rolling process. In this part II of the study, the focus is on the production and reliability testing of the prototype $M0.8{\times}P0.2$ micro-screw. Designs for two flat dies were developed with the aid of the literature and previous studies. Process parameters during the cold thread rolling process were established through FE simulations. The simulation results showed that the threads of the micro-screw are completely formed through the rolling process. Prototype $M0.8{\times}P0.2$ micro-screw were fabricated with a high precision thread rolling machine. In order to verify the simulation results, the deformed shape and dimensions obtained from the experiment were compared with those from the simulations. Hardness and failure torque of the fabricated micro-screw were also measured. The values obtained indicate that the CAE based process design used in this paper is very appropriate for the thread rolling of micro-sized screws.

• 한국해양학회지:바다
• /
• 제8권3호
• /
• pp.327-339
• /
• 2003

겨울철인 1998년 2월과 1999년 1월, 4월에 남해와 동중국해 북부해역에서 형성되는 전선의 분포와 구조를 파악하기 위하여 광역의 종합해양관측을 수행하였다. 관측해역에서 구분된 수계들은 대마난류기원 고온수, 황해냉수(북부냉수 혹은 중앙냉수) 그리고 남해저온수로 분류된다. 황해남부 해역에서는 제주도 서쪽을 우회하여 제주해협으로 유입하는 대마난류기원 고온수가 '┍'자 형태의 기본적 전선을 이루며 대흑산도 남쪽에 황해중앙냉수와 그리고 양자천퇴 동부에서 황해북부냉수와 만나고 있다. 이 전선은 고온수가 황해 북서부로 확장하는 세기에 의해 전선 모서리 형태와 위치가 달라진다. 양자천퇴 부근과 한반도 남서단 외측에서의 전선위치와 구조도 관측시기에 따라 변화한다 남해 전선에서는 연안 저온수가 국지적 냉각에 의해 독립적으로 형성된 수계로서 해저사면을 따라 침강한다. 이러한 겨울철 전선분포의 변화와 전선구조가 변화되는 과정은 탁월풍에 의한 순풍류 및 역풍류, 해수면을 통한 열수지 그리고 전선사이의 밀도차이에 의한 것으로 설명되었다.

• 소성∙가공
• /
• 제7권6호
• /
• pp.620-630
• /
• 1998

Conventional hot forging and thixoforging of Al 7075 alloy have been compared with respect to microstructures, formability and hardness. Two distinctive temperature-strain rate ranges for hot forging of Al 7075 alloy were observed from the results of simple compression tests with strain rates of 10-3∼101 sec-1 in the temperatures between $250^{\circ}C$ and $500^{\circ}C.$ In the dynamic recovery range (low temperature-high strain rate range) multi-stage forging was necessary to form a complex shape part due to the lack of formability. In the high temperature-low strain rate range, in which dynamic recrystallization takes place a complex shaped park could be formed by single-stage forging. About 50% cold working in the SIMA process was necessary to get a fine and homogeneous microstructures. Microstructural study suggest that thixoforged Al 7075 part has fine grains and homogeneous microstructures. Its hardness number is almost same to that of conventional hot forged part after aging treatment.