• 동의생리병리학회지
• /
• 제20권2호
• /
• pp.292-304
• /
• 2006

The Atrophy of lung among chronic asthenia disease is a kind of tuberculosis. It is divided in two types. One is the Atrophy of lung with consumptive fever, the other is the Atrophy of lung with consumptive cold. Four prescriptions can be used treat this disease. Pulmonary abscess(肺癰) is infected by poisonous fatcors of wind and heat. It's symptoms like coughing, chest pain, fever and phlegm with pus after coughing are appeared generally, in case of serious condition, pyemia after coughing can be appeared. This disease is applicable to lung abscess, bronchiectasis, lung gangrene. Six prescriptions can be used to treat this disease. Coughing and congestion of the head(咳嗽上氣) is called Lung-distension(肺腸). Its symptom is dyspnea caused by more expiration rather than inspiration. This disease is divided into two types like chronic asthenia type and inflammatory type. Seven prescriptions can be used to treat this disease.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1999년도 제17회 학술발표회 논문개요집
• /
• pp.98-98
• /
• 1999

Highly transparent and conducting tin-doped indium oxide (ITO) films were deposited on polycarbonate substrate by ion-assited deposition. Low substrate temperature (<10$0^{\circ}C$) was maintained during deposition to prevent the polycarbonate substrate from be deformed. The influence of ion beam energy, ion current density, and tin doping, on the structural, electrical and optical properties of deposited films was investigated. Indium oxide and tin-doped indium oxide (9 wt% SnO2) sources were evaporated with assisting ionized oxygen in high vacuum chamber at a pressure of 2$\times$10-5 torr and deposition temperature was varied from room temperature to 10$0^{\circ}C$. Oxygen gas was ionized and accelerated by cold hallow-cathode type ion gun at oxygen flow rate of 1 sccm(ml/min). Ion bea potential and ion current of oxygen ions was changed from 0 to 700 V and from 0.54 to 1.62 $\mu$A. The change of microstructure of deposited films was examined by XRD and SEM. The electrical resistivity and optical transmittance were measured by four-point porbe and conventional spectrophotometer. From the results of spectrophotometer, both the refractive index and the extinction coefficient were derived.

• 대한한의학원전학회지
• /
• 제19권2호통권33호
• /
• pp.248-265
• /
• 2006

Impulse of ki refers to palpitation around the navel, it is mostly caused by impairment of yang due to erroneous sweating, deficiency of the spleen yang. Behcet's syndrome caused by prolonged damp-heat and pathogenic germs. Its symptoms are characterized by conjunctival congestion, blue canthus and ulceration of the oral cavity, restlessness all the time, etc. It is advisable to follow the therapeutic principles of clearing away heat and drying damp, detoxicating and sterilizing. Lily disease is one of the emotional disease. It caused by yin deficiency of the heart and lung, found in mental depression or convalescence after a critical disease. Its symptoms are characterized by restlessness, reticence, insomnia, failure to walk, poor appetite, a subjective hot or cold, bitter taste and dark urine. It is advisable to follow the therapeutic principle of nourishing yin to clear away heat. Cholera refers to the disease marked by sudden severe vomiting and diarrhea, and colic of the heart and the abdomen. It is mostly caused by deficiency of the ki in the middle-energizer, emotional stress, etc. It is characterized by such symptoms as sudden severe vomiting and diarrhea, restlessness, etc. It is advisable to follow the therapeutic principles of warming yang and removing toxic substances, and strengthening the spleen and stomach. Heat invasion of blood chamber due to affection of the exterior pathogens, pathogenic heat invading the blood in deficiency and fighting with the blood. Its symptoms are marked by fever, feeling of the fullness, etc. There are deficiency of blood, hot blood and stasis of blood. The different therapeutic treatment should be taken according to different types thereof.

• 한국의류산업학회지
• /
• 제2권5호
• /
• pp.416-422
• /
• 2000

In this study, to find out the physiological reaction of the human body and the sensation of comfort when people are wearing sportswear which is made of waterproof breathable fabrics under general environmental conditions (temperature : $20{\pm}1^{\circ}C$, humidity : $60{\pm}5%RH$, air current : 0.1 m/sec) and rainy environmental conditions (temperature : $20{\pm}1^{\circ}C$, humidity : $60{\pm}5%RH$, air current : 0.1 m/sec, rainfall : 250 1/hr), we made an experiment with sportswear in an artificial climate chamber and studied the thermal physiological response and subjective sensation. Mean skin temperature of the subjects was low and had a big range of fluctuation in rainy environmental conditions of two condition. Temperature started to increase at the beginning of the exercise, reached the maximum at the 2nd level of the exercise and then started to decline. Rectal temperature showed a slighter increase and bigger range of fluctuation in general conditions than in rainy conditions. Except clothing micro climate in rainy conditions, temperature and humidity and their range of fluctuation around back were higher than those around chest. Humidity was high and had wide range of fluctuation in general conditions. Heart rate was 4.4 beats/min higher in general conditions. In subjective test on rainy conditions, the feeling of discomfort increased due to the raindrops fallen on the skin. Unlike that in general conditions, cold sensation increased and humidity sensation reached to the peak after the exercise. In wearing sportswear made of shape memory breathable waterproof fabric, controlling function over a small amount of heat and water was distinctive while it turned out to be not so comfortable over a large amount of heat and water. Through this, the limitation of shape memory breathable waterproof fabric was recognised.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.45-45
• /
• 2011

알루미늄과 그 합금은 내부식성(corrosion resistance)이 좋고, 밀도가 낮아 높은 연료소비 효율을 필요로 하는 항공기와 자동차 같은 운송수단의 내-외장 소재로 사용되고 있다. 또한 알루미늄의 높은 내부식성을 이용하여 철강소재의 부식을 방지하는 보호막으로도 폭 넓게 사용된다. 물리기상증착(physical vapor deposition)으로 알루미늄을 코팅하면 박막 성장 초기단계에서 핵(nucleus)을 형성하고, 형성된 핵을 중심으로 주상 구조(columnar structure)로 박막이 성장하는 것이 일반적으로 알려진 방식이다. 주상 구조의 알루미늄 박막은 주상정과 주상정 사이에 필연적으로 공극(pore)이 존재하게 되어 부식을 일으키는 물질이 박막으로 침투하게 되고, 부식 물질과 모재가 반응하여 공식(pitting corrosion)이 발생한다. 본 연구에서는 스퍼터링(magnetron sputtering)을 이용하여 치밀한 조직을 갖는 알루미늄 박막을 코팅할 수 있는 공정을 개발하고, 치밀한 알루미늄 조직이 내부식성에 어떠한 영향을 미치는지 평가하였다. 기판은 냉연강판(cold rolled steel sheet)이 사용되었으며, 알루미늄 타겟의 순도는 99.999%, 크기는 직경 4"이었다. 냉연강판은 진공용기(vacuum chamber)에 장착하기 전에 계면활성제를 이용하여 표면에 존재하는 기름성분을 제거하였으며, 진공용기에 장착한 후에는 아르곤 가스를 이용하여 발생시킨 글로우 방전으로 표면에 존재하는 산화물을 제거하였다. 알루미늄 박막의 조직에 영향을 미치는 공정변수를 확인하기 위해서 스퍼터링 파워, 공정 온도, 공정 압력, 외부 자기장 세기 등의 공정 조건을 변화시켜 코팅을 실시하였다. 실험을 통해서 얻어진 최적 조건으로 알루미늄을 코팅할 경우, 알루미늄 bulk의 밀도와 비교하여 약 94.7%의 밀도를 갖는 알루미늄 박막을 코팅할 수 있었다. 알루미늄 박막이 약 3 ${\mu}$m의 두께로 코팅된 냉연강판의 내부식성 평가(salt spray test, 5% NaCl) 결과, 평가를 시작한 후 72시간 후에도 적청이 발생하지 않았다.

• 한국주조공학회지
• /
• 제31권1호
• /
• pp.11-17
• /
• 2011

The effect of CaO addition to AM60B Mg alloy on tensile properties has been investigated, with focus on strength and ductility at room and elevated temperatures. The 0.25-0.65wt% CaO added AM60B Eco-Mg diecastings were prepared by high pressure die casting using Buhler 1,450-ton cold chamber machine without $SF_6$ and $SO_2$ gases. The microstructures and tensile properties of each alloy were tested. The results show that the grains of AM60B are refined and the mechanical properties increase with CaO addition at room temperature. The improvement of strength and ductility is prominent at 0.45-0.55wt% CaO addition. Also, improved mechanical properties are maintained at elevated temperature of $150^{\circ}C$. CaO addition results in $Al_2Ca$ phase formation mostly on the grain boundaries. This phase leads to the refinement of grain structures and improvement of ductility as well as strength. The suppression of ${\beta}-Mg_{17}Al_{12}$ phase as well as the decrease of fracture surface porosity and other casting defects caused by melt cleanliness also contribute to the enhancement of mechanical properties of AM60B Eco-Mg at room and elevated temperature.

• Nuclear Engineering and Technology
• /
• 제33권4호
• /
• pp.355-364
• /
• 2001

In order to evaluate and finally optimize the vitrification condition for combustible dry active waste (DAW), dust and gas generation characteristics were investigated for PE, cellulose, and mixed waste Tests were conducted by varying the operation variables such as melter configuration, excess oxygen amount, and waste feeding rate. Results showed that dust generation characteristics were affected by the operation parameters and the melter＇s configuration is the dominant one. For all tested DAWs, dust generation was reduced by increasing the waste feeding rate and the excessive oxygen amount in the melter. Among waste types, dust amount was decreased by the order of mixed wastes, PE, and cellulose. Other parameters such as temperature variation and operation time have also affected the dust generation. The optimum condition for the DAW vitrification was determined as the melter＇s configuration equipped for minimizing the waste dispersion with 20 kg/h of waste feeding rate and 100% of excessive oxygen supply. CO gas concentration in the off-gas was immediately influenced by the combustion state in the melter, but showed similar trend as the dust generation. For the NOx production during the vitrification process, thermal NOx, which is generated from the Post Combustion Chamber (PCC), rather than fuel NOx was assumed to be dominant. The gas cleaning of efficiencies of the PCC, wet scrubber, and Selective Catalytic Reduction system (SCR) were found to be high enough to keep the concentration of pollutants (CO, NOx, SOx, HCI) in the stack below their relevant emission limits.

• 한국의류산업학회지
• /
• 제1권1호
• /
• pp.12-17
• /
• 1999

The actual clothing conditions were surveyed to diagnose clothing condition of collegians in the view point of adaptation to the thermal environment in fall. Then, clothing climate, physiological responses, and subjective sensation were investigated through wearing trials on human subjects in climatic chamber based on the results from the survey. Factors to evaluate validity of clothing condition were clothing weight, clothing climate, physiological responses of human body, and subjective sensation. Adaptability of this research to thermal environment was compared to the results of Toda's and Duno's of Japan, Chung's results of Korea rural area, and Winslow's clo value. The standard values for wearing trials were values at comfortable zone, such as $32{\pm}1^{\circ}C$ of temperature and $50{\pm}10%$ of humidity inside clothing, $36.5{\sim}37.3^{\circ}C$ of ear temperature and $32.2{\sim}34.3^{\circ}C$ of mean skin temperature. Clothing weight per body surface area was 680.9 $g/m^2$ in male and 526.7 $g/m^2$ in women. Cold resistance ability of collegians was superior to Japanese and American, and similar to rural male in Korea. According to the examination of clothing adaptability with clothing weight from the investigation on physiological responses and the actual clothing conditions survey, following were found. Temperature inside clothing ($29.8{\sim}32.3^{\circ}C$) was normal, and humidity inside clothing (32.2~54.8%) was at comfortable zone. Mean skin temperature was at its comfortable zone. Therefore, 615 $g/m^2$ in male and 525 $g/m^2$ in female were a desirable wearing condition.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제35회 추계학술대회논문집
• /
• pp.72-76
• /
• 2010

초저온 추진제를 사용하는 액체로켓용 인젝터의 개발을 위해서는 수류시험과 더불어, 연소시험을 통한 성능검증, 점화 cyclogram의 최적화 및 내부연소 유동장에 대한 열-유체역학적 특성에 대한 연구가 필요하다. 본 연구에서는 대학실험실 급에서 운용할 수 있는 범위의 가압식 초저온 추진제 공급 및 제어장치를 이용하여, LOX-$GCH_4$를 추진제로 하는 동축형 스월 인젝터의 연소시험을 수행하였다. 점화 cyclogram 최적화를 통해 O/F ratio 약 2.80, 총질량유량 약 0.19 kg/s의 LOX-$GCH_4$ 추진제를 점화 및 연소시켰고, 연소실 압력은 1.43 MPa, 추력은 38.7kgf으로 측정되었다.

• 대한기계학회논문집B
• /
• 제35권10호
• /
• pp.1033-1040
• /
• 2011

예혼합 버너는 높은 효율과 낮은 배기 때문에 가정용 보일러 버너 시스템에 매우 강력한 버너이다. 일반적으로 가정용 보일러 버너는 내부에 농후한 예혼합 불꽃으로 구성하고 연료는 2차공기의 공급에 의하여 완전연소 되는 분젠 버너를 이용한다. 이것은 상대적으로 긴 불꽃 길이와 높은 과잉공기비에서 작동하기 때문에 높은 효율을 갖는 소형 보일러에 적용하기 어렵다. 이 논문에서 메탈 화이버, 세라믹, SUS 핀과 같은 매질을 사용하는 예혼합 연소 버너의 특징을 실험하였다. 특히, 표면 매질의 비반응 유동 특성은 버너 표면 전체의 유동 속도를 측정하고 조정하였다. 연소 실험은 화염 사진과 화염 온도 측정에 의하여 수행되었다. CO와 NO는 다양한 과잉 공기비와 열량값에 대하여 버너 표면 매질, 연소실, 열교환기의 특성을 측정하고 평가하였다.