• Journal of the Korean Society of Clothing and Textiles
• /
• v.18 no.2
• /
• pp.273-282
• /
• 1994

The physiological significances of the upper and lower body on thermoregulation and sensation were studied in this paper. Experiments were carried out on 4 females in a climatic chamber conditioned at 1) $25^{\circ}C\rightarrow35^{\circ}C\rightarrow25^{\circ}C$, 2) $25^{\circ}C\rightarrow15^{\circ}C\rightarrow25^{\circ}C$, both with 50% R.H., covering the upper body (U) or lower body (L) with garments. 1. When the upper or lower body is covered or exposured respectively, the mean skin tempterature of upper body is higher than that of lower body. And upper body is more easily influenced by the environmental temperature than lower body. It means the skin temperatures of the upper body change faster than those of the lower body following the environmental changes. 2. In U and L, the skin temperatures of the upper limbs (thighs, upper arms) are lower than those of the peripherals (hands, feet). 3. Warm sensations and skin temperatures of the upper body showed high correlation and it was the case with cold sensations and skin temperatures of the lower body. 4. In high temperature condition $(25^{\circ}C\rightarrow35^{\circ}C\rightarrow25^{\circ}C)$, mean skill temperature and rectal temperature in L were lower than in U. This lower rectal temperature in L is probably due to the insulation of the lower body with garments that promotes the heat radiation only in the high temperature environment.

• Journal of Korea Foundry Society
• /
• v.30 no.6
• /
• pp.224-230
• /
• 2010

To prevent oxidation of Mg melt, $SF_6$ gas has been generally used for Mg alloys during melting and casting as a cover gas. The use of $SF_6$ gas, however, will be restricted owing to its crucial impact on global warming. Non-$SF_6$ process during melting and casting in diecasting industry has been proved with Eco-Mg alloys by a simple addition of small amount of CaO into Mg alloys. This paper shows non-$SF_6$ diecasting procedures for 0.7wt% CaO added AZ91D Eco-Mg alloys. Cold-chamber diecasting was performed under $CO_2$ atmosphere without $SF_6$ gas. An increment of mechanical properties, especially strength and ductility of Eco-Mg alloys is, in part, due to high-quality melt, refined grain size and $Al_2Ca$ second phase strengthening. Microstructures and mechanical properties of 0.7wt% CaO added AZ91D Eco-Mg alloys are evaluated in comparison with those of conventional AZ91D Mg alloy.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.18 no.3
• /
• pp.26-33
• /
• 2014

The gas-centerd swirl injectors are widely used on the main combustor of large liquid propellant rocket engines. Since the gas-liquid propellants, such as kerosene and oxygen-rich gas combination, are mixed and burned in the high pressure condition over the critical pressure point, the cold-flow spray test in the atmospheric condition can not represent the actual spray pattern. To observe the near actual spray patterns of gas-centered swirl injector, the high pressure spray chamber and the control system were constructed. The operating sequence was controlled precisely to obtain clear visualization images.

• Environmental Analysis Health and Toxicology
• /
• v.12 no.3_4
• /
• pp.43-54
• /
• 1997

Species, doses and routes extrapolation can be sucessfully carried out by using a physiologically-based pharmacokinetic (PBPK) approach. And PBPK approach to assess risk of hazardous chemicals is reasonable whatever the exposure scenarios are happened. Both partitioning coefficients of chemical between tissue and blood and enzymatic metabolic rate constants are key parameters to build up the PBPK model. In this study, we tried to estimate in vitro metabolic rate constants using a special apparatus instead to measure the in vivo constants which are used to PBPK simulation since the in vitro tests are less expensive and more convenient than in vivo tests. For the purpose, we designed and tested the new system to measure continuously the headspace concentration of VOC. The newly designed system is composed with a diffusion chamber which generates gaseous substrate, a reaction vessel with a recirculating pump to establish a closed system, an autbmatic sampler from a gas phase, a gas chromatography to analyze the headspace. In addition, a cold water condenser is attached between the reaction vessel and pump to reduce the content of gaseous moisture which interferes with chemical analysis. To validate the newly developed methodology, in vitro metabolic rate constants of trichloroethylene (TCE) as a prototype VOC were estimated by simulating observed results with an ACSL program. The simulated results are consistent to those estimated by the other research groups. This finding suggests that our newly designed closed system may be a useful apparatus to estimate in vitro metabolic rate constants for VOC.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.7 no.2
• /
• pp.23-35
• /
• 2003

"Backhole" is a new geometric parameter and is defined as an extra empty volume which is located behind the tangential entries at the rear part of the vortex chamber in the swirl injector. Backhole makes a difference to the spray characteristics of swirl injectors such as the spray angle, SMD, the mixing characteristics and so on. To find its characteristics, experiments are conducted by using a stroboscopic photography, a PDPA apparatus and a mechanical patternator. With the backhole, the mass flow rate of the swirl injector is increased and the center region of the injected flow has more large volume than that of without the backhole. Also the cone angle can be controlled by the backhole, so that the mixing efficiencies of swirl injectors are changed. Based on cold-flow tests, the swirl injector with the backhole may improve its performance.rformance.

• Journal of Chest Surgery
• /
• v.18 no.4
• /
• pp.667-672
• /
• 1985

Primary cardiac tumors are uncommon in all age group. In contrast, tumors metastatic to the heart are significantly more common. On rare occasions, tumor may extend into the heart chamber via inferior vena cava from other parts of the body, such as liver, kidney, and uterus cava. With recent advancement in diagnostic imaging modalities and surgical techniques, cardiac tumors are now potentially curably form of heart disease. The most important factor in diagnosing the tumor is a high index of clinical suspicion. Six patients underwent surgical removal of intracardiac tumor during a 5-year period. The mean age of the 4 women and two men was 40 years [range 23 to 60]. All patients were operated on in the last five years of the studied period. All patients had symptoms varying in duration from 1 month to 4 years [average 13 months]. 2-Dimensional echocardiography contributed most to preoperative diagnosis, confirming presence of an intracardiac tumor in all examined patients. Of the six intracardiac tumor, 5 were myxomas [4 left atrial and 1 right ventricular] and one right atrial metastasis from hepatocellular carcinoma of the liver. In all cases, tumor masses were successfully excised. One patient expired after the operation on account of low cardiac out-put syndrome. Remained one patient among six, tumor mass extended into RA and RV with a stalk via IVC. On later follow-up study showed cold area on liver scan [hepatocellular ca.], so she was transferred to internal medicine, department for chemotherapy. Follow up results showed no signs of tumor recurrence in 4 myxoma cases.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.5
• /
• pp.1138-1149
• /
• 1988

Experiments have been conducted to investigate mean thermal structure in unstable turbulent thermal convection between two horizontal flat plates. The upper plate was kept at a constant cold temperature and the bottom plate at a constant hot temperature. Both air and water were used as its working fluids. Chamber aspect ratios were 3.80 and 6.17, the mean temperature differences between two plates were 2.6-9.3.deg. C, whose Rayleigh numbers in a range 6.13*10$^{5}$ -1, 07*10$^{8}$ . The heat transfer correlations obtained through the experiments are Nu=0.139R $a^{0.285}$ for air and Nu=0.087 R $a^{0.319}$ for water. Profiles of the mean temperature gradient clearly show the -2 and 1 4/3 power law regions.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.04a
• /
• pp.57-60
• /
• 2011

The spray characteristics according to the recess length of the GCSC injector and the change of momentum flux ratio(MFR) of the gas and the liquid have been examined through high pressure cold flow test using a high pressure chamber. The liquid in this experiment was water, and the gas was nitrogen. The spray images were taken by a back-lit strobe imaging technique. Results showed that the spray was a wide hollow cone at the lower MFR(liquid velocity was fixed) and the spray became a narrow solid cone as the MFR was increased. And the injector with short recess length produced a narrow solid cone at the higher MFR.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.13 no.2
• /
• pp.54-63
• /
• 2009

Large eddy simulation was conducted for flow development in a chamber with wall injection which simulates the cold flow in an idealized hybrid rocket motor. It was found that a peculiar timescale, roughly corresponding to St~0.5, resides in the flowfield resulting from the interaction between the main oxidizer and wall injected flows. However, the fact that this time characteristics is absent in the temperature field in the vicinity of the wall indicates that even a small regression rate renders the passive scalar, such as temperature, dissimilar to the velocity field. This implies that a classical approach, which assumes that constant turbulent Prandtl number, should be replaced by a more sophisticated turbulence models to accurately predict the temperature field in the hybrid motor.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.13 no.2
• /
• pp.35-41
• /
• 2009

Both the nozzle expansion ratio and the chamber pressure are simultaneously and continuously changed according to pintle movement, resulting in a different internal flow structure and flow separation characteristics. In this paper, the pintle position effect on nozzle flow structure and separation phenomena is analyzed by experimental-aided Computational Fluid Dynamic(CFD). Among the turbulent models for RANS(Reynold Averaged Navier Stokes) in Fluent, Spalart-Allmaras model is better agreement with the nozzle wall pressure distribution attained by cold-flow test than other models. And even if a conical nozzle is used, there is a shock structure similar to cap-shock pattern mainly occurred in contoured or shaped optimized nozzle because of internal shock generated from pintle tip flow separation.