• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 1994년도 특별강연 및 춘계학술발표 개요집
• /
• pp.44-47
• /
• 1994

The ageing behavior of Cu-bearing HSLA steels was studied by using Differential scanning calorimetry(DSC), Transmission electron microscopy and hardness tester. Two heat evolution peaks were observed during DSC scans over the temperature range of 25～590$^{\circ}C$ at a heating rate of 5$^{\circ}C$/min. The peaks appeared in low (241∼319$^{\circ}C$ : HSLA-A, 224∼310$^{\circ}C$ : HSLA-B) and high temperature (514∼590$^{\circ}C$ : HSLA-A, 451∼558$^{\circ}C$ : HSLA-B) are attributed to the formation of coherent Cu-clusters and noncoherent $\varepsilon$-Cu phase, respectively. It was confirmed that as ageing proceeds, the coherent bcc Cu-clusters transform to noncoherent fcc $\varepsilon$-Cu phase. In the case of the ageing to peak hardness at 300$^{\circ}C$ and 400$^{\circ}C$, the coherent Cu-clusters contributed to the hardening. As ageing time and temperature increase over peak hardness, noncoherent $\varepsilon$-Cu are formed and hardness decreases.

• ETRI Journal
• /
• 제32권3호
• /
• pp.460-463
• /
• 2010

This letter proposes an energy-detection-based non-data-aided weighted non-coherent receiver (NDA-WNCR) scheme for impulse radio ultra-wideband (IR-UWB) pulse-position modulated signals. Compared to the conventional WNCR, the optimal weights of the proposed NDA-WNCR are tremendously simplified as the maximum eigenvector of the IR-UWB signal energy sample autocorrelation matrix. The NDA-WNCR serves to blindly obtain the optimal weights and entirely circumvent the transmission of training symbols or channel estimation in practice. Analysis and simulation results verify that the bit error rate (BER) performance of the NDA-WNCR closely approaches the ideal BER of the conventional WNCRs.

• 한국통신학회논문지
• /
• 제22권5호
• /
• pp.899-906
• /
• 1997

It is known that the Differential Phase Shift Keying (DPSK) modulation scheme in the coherent optical communication system is suitable for design of long-distance transmission system because its receiver performance is 3-5dB better than ASK and FSK. In this paper, we descrive a fundamental understanding of the effects of laser phase noise on the performance of coherent lighwave communication systems. Formulas are derived for the bit error rate in homodyne and heterodyne DPSK. Based on detailed mathematical analysis and estimates, we explain the following finding. DPSK can operates at rates only 300 times greater than the laser linewidth.

• Journal of Communications and Networks
• /
• 제15권6호
• /
• pp.569-575
• /
• 2013

In this paper, we present a photonic approach for generating highly stable coherent sub-terahertz (THz) signals for wireless communications. As proof-of-concept we transmit data at 100 GHz carrier frequency using on-off keying modulation and heterodyne detection. The sub-THz carrier signals are generated by photo-mixing two optical carrier signals at different frequencies, extracted from an optical frequency comb. We introduce a novel system to stabilize the phase of the optical carrier signals. Error-free transmission is successfully achieved up to a bit rate of 8.5 Gbit/s at 100 GHz.

• Journal of the Optical Society of Korea
• /
• 제19권4호
• /
• pp.334-339
• /
• 2015

Terabit-per-second (Tb/s) transmission capacity for the next generation of long-haul communication networks can be achieved using multicarrier optical super-channel technology. In an elastic orthogonal frequency division multiplexing (OFDM) super-channel transmission system, demultiplexing a portion of an entire spectrum in the form of a subband with minimum power is critically required. A major obstacle to achieving this goal is the analog-to-digital converter (ADC), which is power-hungry and extremely expensive. Without a proper ADC that can work with low power, it is unrealistic to design a 100G coherent receiver suitable for a commercially deployable optical network. Discrete Fourier transform (DFT) is often seen as a primary technique for understanding partial demultiplexing, which can be attained either optically or electronically. If fairly comparable performance can be achieved with an all-optical DFT circuit, then a solution independent of data rate and modulation format can be obtained. In this paper, we investigate two distinct OFDM super-channel receiver models, based on electronic and all-optical DFT-technologies, for partial carrier demultiplexing in a multi-Tb/s transmission system. The performance comparison of the receivers is discussed in terms of bit-error-rate (BER) performance.

• 대한금속재료학회지
• /
• 제48권12호
• /
• pp.1070-1077
• /
• 2010

The creep rates of polycrystalline $L1_2$-ordered $Co_3Ti$ and B2-ordered NiAl-Hf intermetallics decrease appreciably with the fine precipitation of the coherent disordered fcc Co-rich phase and $Ni_2AlHf$ phase. With B2-ordered NiAl containing $L2_1-Ni_2AlHf$ precipitates, transmission electron microscope observations of the interaction between dislocations and spherical precipitates revealed that the dislocations tend to be strongly attracted to the particle interfaces during the creep deformation. On the other hand, with $L1_2$-ordered $Co_3Ti$, the significance of the threshold stress is discussed based upon the transmission electron microscope observations of the interaction between dislocations and precipitates. The superdislocations produced during deformation tend to be strongly attracted and dissociated as they meet the coherent disordered precipitates because the anti-phase boundary energy in the disordered phase was zero. An extra force required to pull the dislocations out of the disordered particles during the creep deformation establishes the threshold stress which is beneficial for improving creep strength under lower stresses.

• Current Optics and Photonics
• /
• 제3권5호
• /
• pp.466-472
• /
• 2019

A system for continuous-wave coherent Doppler lidar (CW lidar), made up of all-fiber structures and a coaxial transmission telescope, was set up for wind measurement in Hefei (31.84 N, 117.27 E), Anhui province of China. The lidar uses a fiber laser as a light source at a wavelength of $1.55{\mu}m$, and focuses the laser beam on a location 80 m away from the telescope. Using the CW lidar, radial wind measurement was carried out. Subsequently, the spectra of the atmospheric backscattered signal were analyzed. We tested the noise and obtained the lower limit of wind velocity as 0.721 m/s, through the Rayleigh criterion. According to the number of Doppler peaks in the radial wind spectrum, a classification retrieval algorithm (CRA) combining a Gaussian fitting algorithm and a spectral centroid algorithm is designed to estimate wind velocity. Compared to calibrated pulsed coherent wind lidar, the correlation coefficient for the wind velocity is 0.979, with a standard deviation of 0.103 m/s. The results show that CW lidar offers satisfactory performance and the potential for application in wind measurement.

• 한국통신학회논문지
• /
• 제39C권5호
• /
• pp.413-417
• /
• 2014

코히어런트 초고속 광전송 링크에서는 성능을 열화시키는 잡음요소를 제거하는 것이 더욱 중요하게 대두되고 있다. 그 중 위상잡음과 주파수 오프셋은 위상문제를 일으키는 잡음으로, 신호 처리를 방해하는데 가장 주요한 요인이다. 본 논문에서는 디지털 신호처리 방법을 이용하여 위상잡음과 주파수 오프셋을 보상하는 방법을 제안하였으며 시뮬레이션을 통해 타당성을 검증하였다. 제안된 알고리즘은 기존의 보상 방법들보다 계산 복잡도를 낮추어, 신호 처리속도가 중요한 초고속 코히어런트 광전송 시스템에 있어서 수신기의 신호처리 부담을 완화하였다.

• 한국정보통신학회논문지
• /
• 제11권11호
• /
• pp.2021-2026
• /
• 2007

본 논문에서는 다중객체 인식 시스템과 같은 저용량 데이터전송의 저전력 무선센서네트워크 분야에 적용 가능한 새로운 펄스 방식의 저 속도 무선 비동기식 UWB(Wireless Asynchronous Ultra-Wide band) 시스템을 제안하고 이를 설계 및 구현한다. 특히, 펄스방식의 저전력 UWB시스템을 구현하기 위해서 전형적인 통신시스템의 수신기 구조인 RF단의 믹서, 상관기와 A/D 변환기를 없애고 최대한 단순화된 구조의 무선 비동기 방식의 UWB 송수신기를 설계하였다. 또한, 설계된 무선 비동기식 UWB 시스템의 테스트베드를 구현하였고, 구현된 무선 비동기식 UWB 시스템의 응용 시스템 예로 홈 내 또는 강의실과 같은 곳에서 하나의 송신 무선 비동기식 UWB 송신기 측에서 10 m 거리 범위 내에 있는 다수의 수신 무선 비동기식 UWB 측으로 동시에 그림이나 글을 전송할 수 있는 1:N HD(Half Duplex) 방식의 저전력 무선 캔버스(CANVAS) 시스템을 실제 구현하였다. 이를 통해, 제안된 무선 비동기식 UWB 시스템은 LOS(Line of Sight) 채널상태의 전송거리 10m에서 안정적으로 최대 115kbps 급의 전송속도가 지원 가능함을 확인하였다.

• 대한기계학회논문집A
• /
• 제21권7호
• /
• pp.1127-1140
• /
• 1997

With the study for identifying the transmission characteristics of vibration and noise generated by operating engine system of a vehicle, recently many engineers have studied actively the reduction of vibration and noise inducing uncomfortableness to the passenger. In this study, output noise was analyzed by multi-dimensional spectral analysis and vector synthesis method. The multi-dimensional analysis method is very effective in case of identification of primary source, but this method has little effect on suggestion for interior noised reduction. For compensation of this, vector synthesis method was used to obtain effective method for interior noise reduction, after identifying primary source for output noise. In this paper, partial coherence function of each input was calculated to know which input was most coherent to output noise, then with simulation of changes for input magnitude and phase by vector synthesis diagram, the trends of synthesized output vector was obtained. As a result, the change of synthesized output vector could be estimated.