• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2013년도 제46회 KOSCO SYMPOSIUM 초록집
• /
• pp.19-20
• /
• 2013

The cofiring of renewable fuel in coal fired boilers is an attractive option to mitigate $CO_2$ emissions, since it is relatively low cost option for efficiently converting renewable fuel to electricity by adding biomass as partial substitute of coal. However, it would lead to reduce plant efficiency and flexibility in operation, and increase operation cost and capital cost associated with renewable fuels handling and firing equipment. The aim of this study is to investigate reduction of carbon dioxide at varying percentage of biomass in fuel blend to the boiler biomass, and estimate operation and capital cost. Wood pellet, PKS (palm kernel shell), EFB (empty fruit bunch) and sludge are considered as a renewable fuels for a cofiring with coal. Several approaches by the cofiring ratio are chosen from past plant demonstrations and commercial cofiring operation, and they are evaluated and discussed for CO2 reduction and cost estimation.

• 한국세라믹학회지
• /
• 제34권6호
• /
• pp.601-610
• /
• 1997

In cofiring of multilayered alumina with tungsten, the change of camber with lamination condition was experimented and the effect of sintering shrinkage of alumina and tungsten was investigated. From the exact measurement of sintering shrinkage of tungsten thick film, as lamination pressure increased, the sintering shrinkage of alumina decreased but that of tungsten thick film was not changed. So it was though that the main factor which induced the sintering shrinkage difference between ceramics and metal with lamination condition was the change of sintering shrinkage of ceramics. In case of high lamination pressure, high green sheet density, the cofired specimen showed low camber due to low shrinkage difference between alumina and tungsten and there was a linear relation between camber and shrinkage difference. It was found that this shrinkage difference could change the thickness of tungsten film and the microstructure within via hole during cofiring.

• Macromolecular Research
• /
• 제12권4호
• /
• pp.391-398
• /
• 2004

Thick-film photolithography is a new technology that combines lithography processes, such as exposure and development, with the conventional thick-film process applied to screen-printing. In this study, we developed a low-temperature cofireable silver paste applicable for thick-film processing to form fine lines using photolitho-graphic technologies. The optimum paste composition for forming fine lines was investigated. The effect of processing parameters, such as the exposing dose, had on the fine-line resolution was also investigated. As the result, we found that the type of polymer and monomer, the silver powder loading, and the amount of photoinitiator were the main factors affecting the resolution of the fine lines. The developed photoimageable silver paste was printed on a low-temperature cofireable green sheet, dried, exposed, developed in an aqueous process, laminated, and then fired. Our results demonstrate that thick-film fine lines having widths < 20 $\mu\textrm{m}$ can be obtained after cofiring.

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2002년도 추계총회 및 연구발표회 초록집
• /
• pp.105.1-105
• /
• 2002

• 한국세라믹학회지
• /
• 제41권4호
• /
• pp.313-322
• /
• 2004

후막 광식각 기술은 스크린 인쇄 등의 일반적인 후막공정에 노광 및 현상 등의 리소그라피 공정을 접목시킨 새로운 기술이다. 본 연구에서는 후막 광식각 기술을 이용하여 미세라인을 형성할 수 있는 저온동시소성용 Ag 페이스트를 개발하였다. 페이스트를 구성하는 Ag분말과 폴리머, 모노머, 광개시제 등의 양을 조절하여 미세라인을 형성할 수 있는 최적 조성을 연구하였으며. 또한 노광량과 같은 공정변수가 미세라인 형성에 미치는 영향을 연구하였다. 실험결과 폴리머/모노머비, Ag 분말 중량비, 광개시제의 양 등이 미세라인의 해상도에 영향을 미치는 주요 인자임을 확인할 수 있었다. 개발된 감광성 Ag 페이스트를 저온동시소성용 그린 시트에 전면 인쇄한 후 건조, 노광, 현상, 적층, 소성 과정을 통하여, 소성 후 20$\mu\textrm{m}$ 이하의 선폭을 가지는 후막 미세라인을 형성할 수 있었다.

• 에너지공학
• /
• 제19권4호
• /
• pp.251-257
• /
• 2010

우리나라는 기후변화 대응 및 효율적인 에너지 이용을 위하여, 2012년부터 신재생에너지 공급의무제(RPS, Renewable Portfolio Standard)를 시행할 계획이나, 신재생에너지 자원의 부족, 관련기술 수준의 한계 등으로 국내 발전부문에서의 RPS 공급의무율 이행에는 어려움이 예상되며 목질계 바이오매스의 석탄화력 혼소가 대안 중에 하나이다. 목질계 바이오매스의 석탄화력 혼소는 기술적 접근이 용이하고, 유연탄과 비교했을 경우 $CO_2$ 편익, 신재생에너지 인증서(REC, Renewable Energy Certificate) 편익 등을 고려시 경쟁력이 있으며, 발전 원가 측면에서 타 신재생에너지 전원보다 우수하다. 따라서 국내발전부문에서 중장기적인 RPS 공급의무율 이행을 위해서는 목질계 바이오매스의 활용이 요구된다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2007년도 추계학술발표대회 및
• /
• pp.40.1-40.1
• /
• 2007

• 한국세라믹학회지
• /
• 제31권4호
• /
• pp.427-435
• /
• 1994

Cu-metallized low firing temperature substrates were synthesized by cofiring green sheet of cordierite-based glass with Cu. By Sol-Gel method, Cu powder was coated with borosilicate gel which should act as a glass frit in Cu paste during cofiring. Theoretical weight ratios of Glass/Cu were controlled to be 2.5, 5, 10 and 15% by varying alkoxide concentrations. Average particle size of coated Cu was 0.629~0.674 ${\mu}{\textrm}{m}$ in comparison to that of as-received Cu(0.596 ${\mu}{\textrm}{m}$), which increased with alkoxide concentration but did not increase above certain concentration. The weight ratios of coated layer were 2.11~5.37%. The properties of Cu-metallized low firing temperature substrate, cofired at 90$0^{\circ}C$ for 1h under H2/N2 atmosphere, were as follows; sheet resistance was 13~43 m{{{{ OMEGA }}/$\square$, adhesion strength was 1.0~2.1 kgf/$\textrm{mm}^2$. From the observations of SEM photographs, the gel coated on Cu performed excellently as a glass frit.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2001년도 The IMAPS-Korea Workshop 2001 Emerging Technology on packaging
• /
• pp.151-156
• /
• 2001

Using the photoimageable thick film conductors, $25\mu\textrm{m}$ line widths and $25\mu\textrm{m}$ spaces can be obtained. Test patterns are made by green tape lamination, paste printing, exposing to UV light, developing in an aqueous process and cofiring. Postfiring method using alumina substrate can be also applied to fine line formation. Series gap resonator formed by photopatterning process showed the improved signal transmission characteristics compared to that obtained by conventional screen printing.

• 마이크로전자및패키징학회지
• /
• 제9권2호
• /
• pp.19-25
• /
• 2002

저온소결기판을 위하여 green sheet를 제조하기 위한 조성으로 $Li_2$O.MgO. $MgF_2$.$SiO_2$.$B_2O_3$를 기초 조성으로 선정하였다. 조합 후 용융하여 만들어진 모유리는 열분석을 통하여 최적 핵형성 온도와 최고 결정성장 온도를 도출하였으며 핵형성 온도는 전이온도와 같은 $490^{\circ}C$로 선정하였다. 결정화 유리를 제조하기 위하여 두 단계의 열처리를 실시하였으며 , 생성된 결정상은 Lithium fluorhectorite와 Lithium boron fluorphlogopite결정상 이었다. 계속적으로 제조된 결정화 유리는 water swelling 현상을 이용하여 분말화를 실시하였으며 평균 입도크기는 2.574 $\mu\textrm{m}$이었다. glass ceramics 분말은 물에 넣으면 반응하여 팽창하는 것과 함께 끈적끈적한 sol이 생성되는 현상을 이용하여 green sheet 제조를 위한 slurry를 제조하였다. Tape casting을 위한 slurry의 결정화 유리 분말 대비 용매의 최적 비율은 100:18이었고, 슬러리의 점도는 11,000~14,000cps 이었다. KCl 1 M용액 10min담지 시편에 대해서는 $900^{\circ}C$에서, 20 min담지 시편에 대해서는 $800^{\circ}C$에서 각각 치밀한 소결성을 나타내었다.