• 한국환경보건학회지
• /
• 제38권5호
• /
• pp.424-430
• /
• 2012

Objective: The purpose of this study was to present the standard deviation of the elemental normalization of concentration of selected heavy metals in the surface sediment of Lake Paldang. Methods: Grain size dependency of selected heavy metal concentrations in the surface sediments of Lake Paldang was analyzed by the extrapolation method. The heavy metal concentrations were the sum of all fractions. Results: Cd and Cu showed an increase of the coefficient of determination($r^2$) in the fractional content of particle size, from <256 ${\mu}m$ to <20 ${\mu}m$, and a decrease from <20 ${\mu}m$ to <1 ${\mu}m$. The normalized concentration of Cd and Cu by extrapolation at 50% <20 ${\mu}m$ were 0.8 mg/kg, 37.0 mg/kg, 57.6 mg/kg and 201.7 mg/kg respectively. Conclusions: The normalized concentrations in the sediment of Lake Paldang are 1.5-2.0 times higher than mean average concentration. We concluded that in interpretation of heavy metal concentration in the sediment of Lake Paldang, normalization of grain size dependency should be considered.

• 정보보호학회논문지
• /
• 제29권5호
• /
• pp.1007-1017
• /
• 2019

현재 대부분의 생체인증 시스템은 단일 생체정보를 이용하여 사용자를 인증하고 있는데, 이러한 방식은 노이즈로 인한 문제, 데이터에 대한 민감성 문제, 스푸핑, 인식률의 한계 등 많은 문제점들을 가지고 있다. 이를 해결하기 위한 방법 중 하나로 다중 생체정보를 이용하는 방법이 제시되고 있다. 다중 생체인증 시스템은 각각의 생체정보에 대해서 information fusion을 수행하여 새로운 정보를 생성한 뒤, 그 정보를 활용하여 사용자를 인증하는 방식이다. Information fusion 방법들 중에서 score-level fusion 방법을 보편적으로 많이 사용한다. 하지만 정규화 작업이 필요하다는 문제점을 갖고 있고, 데이터가 같아도 정규화 방법에 따라 인식률이 달라진다는 문제점을 갖고 있다. 이에 대한 대안으로 정규화 작업이 필요 없는 rank-level fusion 방법이 제시되고 있다. 하지만 기존의 rank-level fusion 방법들은 score-level fusion 방법보다 인식률이 낮다. 이러한 문제점을 해결하기 위해 상관계수를 이용하여 score-level fusion 방법보다 인식률이 높은 rank-level fusion 방법을 제안한다. 실험은 홍채정보(CASIA V3)와 얼굴정보(FERET V1)를 이용하여 기존의 존재하는 rank-level fusion 방법들의 인식률과 본 논문에서 제안하는 fusion 방법의 인식률을 비교하였다. 또한 score-level fusion 방법들과도 인식률을 비교하였다. 그 결과로 인식률이 약 0.3%에서 3.3%까지 향상되었다.

• 천문학회보
• /
• 제36권2호
• /
• pp.53.1-53.1
• /
• 2011

We analyze the halo and galaxy catalogs from the Millennium simulations at redshifts z=0, 0.5, 1 to determine the alignment profiles of cluster galaxies in terms of the matter density correlation coefficient and discuss a cosmological implication our result has for breaking parameter degeneracies. For each selected cluster, we measure the alignment between the major axes of the pseudo inertia tensors from all satellites within cluster's virial radius and from only those satellites within some smaller radius. Then we average the measured values over the similar-mass sample to determine the cluster galaxy alignment profile as a function of top-hat scale difference at each redshift. It is shown that the alignment profile of cluster galaxies is well approximated by a power-law of the nonlinear density correlation coefficient that is independent of the power spectrum normalization and bias factor. The alignment profile of cluster galaxies is found to have higher amplitude and lower power-law index when averaged over the larger-mass sample and to have rather weak redshift-dependence. This result is consistent with the picture that the satellite galaxies retain the memory of the external tidal fields right after merging and infalling into the clusters but they gradually lose the initial alignment tendency as the cluster's relaxation proceeds. Demonstrating that the nonlinear density correlation coefficient varies sensitively with the density parameter and neutrino mass fraction, we discuss a potential power of the cluster galaxy alignment profile as an independent probe of cosmology.

• 한국농공학회논문집
• /
• 제65권2호
• /
• pp.47-57
• /
• 2023

The increase of impermeable area ratio is causing hydrologic cycle problems in urban areas and groundwater depletion in rural areas, permeable pavements are getting attention to expand permeable areas. The performance of the permeable concrete block pavement, which is part of the permeable pavement, is greatly affected by the porosity. In addition, the permeability coefficient is a major factor when designing permeable concrete block pavement. Existing porosity and permeability test methods have problems such as uneconomical or poor field applicability. The object of this study was to develop a methodology for evaluating porosity and permeability coefficient using a surface image of a permeable concrete block. Specimens are manufactured with various porosity ranges and porosity and permeability tests are performed. After surface image preprocessing, normalization and binarization methods were compared. Through this, the method with the highest correlation with the lab test result was determined. From the results, the PDR (pore determined ratio) was obtained. Simple linear regression analysis is performed with PDR and lab test results. The results showed a high correlation of R² more than 0.8, and the errors were also low.

• 한국정보통신학회논문지
• /
• 제25권6호
• /
• pp.819-824
• /
• 2021

자율 주행이나 CCTV와 같이 영상 처리 관련 기술들이 발전함에 따라 영상 왜곡에 대한 문제점을 개선하기 위해 단일 영상을 이용한 안개 제거 알고리즘이 연구되고 있다. 안개 밀도 예측 방법으로는 깊이 맵을 생성하여 영상의 깊이를 추정하는 방법이 있고, 깊이 맵의 학습 데이터로 다양한 안개 특징을 사용할 수 있다. 또한 안개 제거 알고리즘을 실제 기술들에 적용하기 위해 고화질 영상을 실시간으로 처리할 수 있는 하드웨어 구현은 필수적이다. 본 논문에서는 변동계수 기반의 안개 특징인 NLCV(Normalize Local Coefficient of Variation)를 하드웨어로 구현한다. 제안하는 하드웨어는 Xilinx 사의 xczu7ev-2ffvc1156을 Target device로 FPGA 구현하였다. Vivado 프로그램을 통해 합성한 결과 479.616MHz의 최대 동작 주파수를 가지며 4K UHD(3840×2160) 환경에서 실시간 처리 가능함을 보인다.

• 한국소음진동공학회논문집
• /
• 제21권12호
• /
• pp.1192-1198
• /
• 2011

Design routines of a torsional spring-viscous damper for a 1800 kW four cycle diesel engine-generator system are described. Modal techniques for system normalization and optimal equations for damper design are used to obtain proper design parameters of the damper. A prototype damper is manufactured according to the described design process and its two design parameters, stiffness and damping, are evaluated experimentally by torsional actuator test and free decay test. Experimentally obtained values of stiffness and damping coefficients showed good agreements with the designed values of the prototype damper.

• 대한산업공학회지
• /
• 제23권4호
• /
• pp.803-816
• /
• 1997

In this paper we propose a new approach far part families considering multiple attributes of parts in the design and operating stage of flexible manufacturing systems. We first represent the relationship of parts and the relative attributes using fuzzy membership function, AHP method and normalization. As a result, more realistic nonbinary data of the relationship is obtained. Then we group parts into part families based on the nonbinary data using fuzzy $\alpha$-cut and new similarity coefficient method. The performance of our method is compared numerically with others.

• 전기학회논문지
• /
• 제65권10호
• /
• pp.1774-1779
• /
• 2016

This paper proposes a portable cable fault detection system with automatic fault distinction and distance measurement using time-frequency correlation and reference signal elimination method and automatic fault classification algorithm in order to have more accurate fault determination and location detection than conventional time domain refelectometry (TDR) system despite increased signal attenuation due to the long distance to cable fault location. The performance of the developed system method was validated via an experiment in the test field constructed for the standardized performance test of power cable fault location equipments. The performance evaluation showed that accuracy of the developed system is less than 1.34%. Also, an error of automatic fault type and location by detection of phase and peak value through elimination of the reference signal and normalization of correlation coefficient and automatic fault classification algorithm not occurred.

• Journal of Information Processing Systems
• /
• 제7권3호
• /
• pp.425-434
• /
• 2011

The success of iris recognition depends mainly on two factors: image acquisition and an iris recognition algorithm. In this study, we present a system that considers both factors and focuses on the latter. The proposed algorithm aims to find out the most efficient wavelet family and its coefficients for encoding the iris template of the experiment samples. The algorithm implemented in software performs segmentation, normalization, feature encoding, data storage, and matching. By using the Haar and Biorthogonal wavelet families at various levels feature encoding is performed by decomposing the normalized iris image. The vertical coefficient is encoded into the iris template and is stored in the database. The performance of the system is evaluated by using the number of degrees of freedom, False Reject Rate (FRR), False Accept Rate (FAR), and Equal Error Rate (EER) and the metrics show that the proposed algorithm can be employed for an iris recognition system.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2008년도 춘계학술대회 논문집
• /
• pp.213-218
• /
• 2008

동일 지점을 촬영한 위성영상은 위성의 센서나 영상의 취득 시기, 지형의 상태 등에 따라 그 지점에 나타나는 화소값이 일정하지 않다. 이러한 영상은 영상간 모자이크나 변화 탐지 결과에 영향을 미칠 가능성이 높으므로 방사보정(또는 방사정규화)을 통해 화소값의 차이를 최소화시킬 필요가 있다. 본 연구는 선형회귀식을 적용한 상대 방사정규화에 초점을 맞추고 있으며, 선형회귀식 구성에 필요한 PIF(Pseudo Invariant Feature)를 자동으로 추출하기 위해 Ordinal Rank 알고리즘을 적용하였다. 이 방법을 통해 각 밴드별 후보 PIF를 추출하고, 공통으로 해당되는 최종 PIF를 추출할 수 있었다. RMSE(Root Mean Square Error), Dynamic range, Coefficient of variation 등을 통해 방사보정 후의 결과를 평가해보았다. 영상회귀를 이용한 방사보정알고리즘과의 비교를 통해 제안된 알고리즘이 갖는 장점을 확인하였다.