• Journal of information and communication convergence engineering
• /
• 제3권2호
• /
• pp.72-75
• /
• 2005

In this work, we first present our study on the decoding schemes for space-time block code as well as our comments on their complexity. Then, we propose a new modified complex sphere decoding scheme, which has lower computational load than that of conventional complex sphere decoders. In the proposed scheme, the boundary for searching is aided with the intersection of approximate polygon of searching circle and disk of constellation. Therefore, the proposed scheme can reduce the searching boundary while can avoid missing searching points. The performance of the proposed scheme is verified by computer simulation that consolidates our scheme.

• Journal of applied mathematics & informatics
• /
• 제14권1_2호
• /
• pp.461-471
• /
• 2004

In recent years, large volumes of data are transferred between a computer system and various subsystems through digital logic circuits and interconnected wires. And there always exist potential errors when data are transferred due to electrical noise, device malfunction, or even timing errors. In general, parity checking circuits are usually employed for detection of single-bit errors. However, it is not sufficient to enhance system reliability and availability for efficient error detection. It is necessary to detect and further correct errors up to a certain level within the affordable cost. In this paper, we report a generation of 3-distance code using the characteristic matrix of a PBCA.

• 한국측량학회지
• /
• 제16권2호
• /
• pp.235-242
• /
• 1998

본 연구는 GPS 보조에 의한 항공삼각측량 및 자동차량항법장치 등과 같은 고정밀 측량에서 주요 오차 원인이 되고 있는 다중경로 오차를 검출하고 이를 요구 정확도로 축소시키는데 그 목적이 있다. 수신점의 다중 수신기를 고정한 후 동적 수신기가 연속적으로 이동할 때, 망조정시 smoothed코드 측정과 순수 코드 측정을 실행하여 동적수신기에 대한 단차분법 코드파 위치 해석에서 3차원 RMS 오차가 약 30% 축소됨을 알 수 있었다. 이러한 망조정들은 다중 수신점에서 실행되었지만, 위치결정은 항상 동적 수신기와 하나의 기준 수신점 사이의 단차분법에 의해 실행된다는 것에 근거한 것이고, 서로 매우 근접한 수신기로부터 이중차를 이용하여 대기 오차를 포함한 모든 상관성 오차를 상당히 축소할 수 있을 뿐만 아니라 다른 처리 기법들과 조합하여 사용할 있으리라 생각된다.

• Nuclear Engineering and Technology
• /
• 제54권1호
• /
• pp.72-83
• /
• 2022

This paper presents a numerical investigation of two-phase natural circulation flows established when external reactor vessel cooling is applied to a severe accident of the APR1400 reactor for the in-vessel retention of the core melt. The coolability limit due to external reactor vessel cooling is associated with the natural circulation flow rate around the lower head of the reactor vessel. For an elaborate prediction of the natural circulation flow rate using a thermal-hydraulic system code, MARS-KS1.5, a three-dimensional computational fluid dynamics (CFD) simulation is conducted to estimate the flow rate and pressure distribution of a liquid-state coolant at the brink of significant void generation. The CFD calculation results are used to determine the loss coefficient at major flow junctions, where substantial pressure losses are expected, in the nodalization scheme of the MARS-KS code such that the single-phase flow rate is the same as that predicted via CFD simulations. Subsequently, the MARS-KS analysis is performed for the two-phase natural circulation regime, and the transient behavior of the main thermal-hydraulic variables is investigated.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2005년도 춘계종합학술대회
• /
• pp.1109-1112
• /
• 2005

멀티캐리어 DS-CDMA시스템은 동일 시점에서 파일롯 채널을 제외한 모든 부채널에 동일 한 데이터가 전송된다. 이때 채널 추정을 위한 파일럿 채널의 수가 증가하게 되면 보다 정확한 채널 추정이 가능하나 데이터 채널의 감소로 인해 주파수 다이버시티의 효과가 크게 줄어들게 되어 전체적인 시스템성능을 저하시키게 된다. 따라서 파일롯 채널과 데이터 채널의 수에 대한tradeoff 가 존재하며 채널환경에 따른 요구되는 최적의 파일럿채널의 수가 결정되어야 한다. 본 논문에서는 파일롯 채널을 이용한 채널추정을 갖는 멀티캐리어 DS-CDMA시스템의 성능을 분석하고 채널환경에 따른 최적의 파일롯 채널구조를 제시한다. 전체 전송대역폭을 일정하게 유지했을 때 특정 채널환경에서 전체 부 반송파의 개수 및 파일롯 채널의 개수에 대한 최적값이 존재한다. 본 논문에서는 이와 같은 채널환경에 따른 파일롯 및 데이터 채널의 최적값을 수학적인 분석을 통해 제시한다.

• 제어로봇시스템학회논문지
• /
• 제14권9호
• /
• pp.939-947
• /
• 2008

The GPS tracking loop consists of three parts in general: discriminator, loop filter and DCO (Digitally Controlled Oscillator). The loop filter is the main part of the tracking loop designed to ensure a good tracking performance. Generally, the loop filter is designed using classical PI(Proportional Integral) control. Although the carrier Doppler and code Doppler are generated by the same relative movement between the satellite and the user, often, the loop filters for each tracking loop are designed separately and independently. Sometimes, they are used in a combined manner such as carrier aided code tracking, FLL assisted PLL, etc. For better GPS signal tracking, we need to design the FLL/PLL/DLL altogether optimally. The purpose of this paper is to design a GPS receiver tracking loop based on the Kalman filter in a combined manner. Also, the proposed GPS receiver tracking loop is compared with a conventional tracking loop in terms of the transfer function and the DCO input. This paper shows that conventional tracking loop is equal to the Kalman filter based tracking loop.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제17권8호
• /
• pp.2157-2169
• /
• 2023

In order to handle the problem that puncture patterns will change the position distribution of original information bits and frozen bits in polar codes, which affects performance of puncture polar codes further, a minimum row weight and polar spectrum based puncture polar codes construction algorithm (called PA-MRWP) is proposed in this paper. The algorithm calculates row weight of generator matrix and sorts the row weight in ascending order first. Next, the positions with the minimum row weight are selected as initial puncture positions. If the rows with the same row weight cannot all be punctured, polar spectrum based auxiliary puncture scheme is used. In sub-channels with the same row weight, rows corresponding to the polarized sub-channels with higher reliability are selected as puncture positions to construct puncture vector, and the reliability is calculated based on polar spectrum. It is actually a two-step selection strategy, the proposed minimum row weight puncture (MRWP) algorithm is used for primary selection and polar spectrum based auxiliary puncture is used for adjustment. Simulation results show that, compared with worst quality puncture (WQP) algorithm, the proposed PA-MRWP algorithm and Gaussian approximation-aided minimum row weight puncture (GA-MRWP) algorithm provide gains of about 0.46 dB and 0.29 dB at bit error rate (BER) of 10^-4, respectively when code length N=400, code rate R=1/2. In addition, the proposed puncture algorithms improve the BER performance significantly with respect to quasi-uniform puncture (QUP) algorithm.

• 한국산업정보학회논문지
• /
• 제16권4호
• /
• pp.27-35
• /
• 2011

직교 주파수분할 다중(OFDM)시스템과 직접확산 코드분할다중접속(DS/CDMA)시스템이 결합된 다중반송파(MC) DS/CDMA 시스템은 대역폭 효율, 고 전송률과 페이딩에 강한 특성으로 많은 주목을 받고 있다. 본 논문에서는 시간영역과 주파수영역에서 확산을 수행하는 다중전송률 MC-DS/CDMA 시스템에서 복잡성이 감소된 다중사용자 검출기를 살펴본다. 여기서 시간영역과 주파수영역의 확산부호로는 2차원 직교 가변확산부호(OVSF)로부터 만들어진 1차원 OVSF 코드를 사용한다. 제안된 시스템에서는 다중사용자간섭(MUI)을 감소시키기 위해 코드그룹 간섭제거(CGIC) 수신기를 사용하는데, 이 CGIC 수신기는 1차원 OVSF 코드들의 상관특성을 이용하여 코드 그룹이라는 개념을 사용하여 다른 사용자들의 정보 없이도 사용자 선호를 검출할 수 있는 수신기이다. CGIC를 갖는 다중사용자 검출기가 시간 및 주파수영역에 따로 또는 같이 적용될 것이다. AWGN 채널 환경 하에서 시스템의 성능을 분석하며, 단일(다중) 전송률, 다중사용자를 갖는 시간/주파수 영역에서 확산된 MC-DS/CDMA과 비교할 것이다. 이러한 결과로서 기존의 정합검출기에 비해 제안된 시스템의 성능이 향상됨을 알 수 있다.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2003년도 추계학술발표회 논문집
• /
• pp.281-286
• /
• 2003

Since National Geographic Information System was started, paper maps have been made with computer aided editing of digital map, instead of etching map-size negative film. Automated paper mapping system's necessity is growing more and more, because digital map has changed into Ver.2.0 which include attributes of feature. Therefore, in this study we try to analyze correlation of the digital map feature code and the 1/5,000 topographic map specifications which is necessary for paper mapping automatization using digital map Ver.2.0, and try to develop fundamental modules which will play a core role in automated paper mapping system.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2004년도 춘계학술발표회논문집
• /
• pp.321-328
• /
• 2004

Since National Geographic Information System was started, topographic maps have been made with computer aided editing of digital map, instead of etching map-size negative film. topographic mapping system's necessity is growing more and more, because digital map has changed into Ver.2.0 which include attributes of feature. On the basis of the previous study for analyzing correlation between the digital map feature code and the 1/5,000 topographic map specifications and trying to develop fundamental modules which will play a core role in topographic mapping system, in this study, we apply some 1/5,000 digital maps Ver.2.0 to topographic mapping system have implemented and try to analyze the result.