• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.158.1-158
• /
• 2001

An algorithmic gray code analog-to-digital converter (ADC), which is based on gray coding, is proposed in this article. The realization method makes use of a MOS triangular function circuit to provide a high-speed operation and low accumulated error. The proposed ADC is simple, small in size and suitable for fabrication using a standard CMOS process. Simulation results showing the performances of the proposed circuit are also included.

• 한국생산제조학회지
• /
• 제9권3호
• /
• pp.103-110
• /
• 2000

Shaft encoder which encodes the rotational angle of a shaft becomes more important recently due to factory automation and office automation. Although an absolute type encoder is more dsirable due to its convenience an incremental encoder is commonly used because of its cost and technical difficulties Fabricating a high resolution absolute encoder is very diff-cult because the physical size is limited by currently available technology. In order to overcome this difficulty Moire fringe can be used incorporated with gray code. In order to measure the position of fringes which move as the code disk rotates a neural network was developed in this paper. Formerly fringe position is usually measured by a sophisticated software which needs a little long calculation time. However using nerual network method can eliminate such calculation time even though it needs learning job The pro-posed method is verified through several experiments.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제14권6호
• /
• pp.2554-2575
• /
• 2020

Data hiding technology hides secret information into the carrier, so that when the carrier is transmitted over network, it will not attract any malicious attention. Using data compression, it is possible to reduce the data size into a small compressed code, which can effectively reduce the time when transmitting compressed code on the network. In this paper, the main objective is to effectively combine these two technologies. We designed a data hiding scheme based on two techniques which are turtle-shell information hiding scheme and absolute moment block truncation coding. The experimental results showed that the proposed scheme provided higher embedding capacity and better image quality than other hiding schemes which were based on absolute moment block truncation coding.

• Nuclear Engineering and Technology
• /
• 제41권3호
• /
• pp.295-306
• /
• 2009

The subchannel grade void distributions in the NUPEC (Nuclear Power Engineering Corporation) BFBT (BWR Full-Size Fine-Mesh Bundle Tests) facility were evaluated with the subchannel analysis code MATRA and the system code MARS. Fifteen test series from five different test bundles were selected for an analysis of the steady-state subchannel void distributions. Two transient cases, a turbine trip without a bypass as a typical power transient and a re-circulation pump trip as a flow transient, were also chosen for this analysis. It was found that the steady-state void distributions calculated by both the MATRA and MARS codes coincided well with the measured data in the range of thermodynamic qualities from 5% to 25%. The results of the transient calculations were also similar and were highly feasible. However, the computational aspects of the two codes were clearly different.

• 품질경영학회지
• /
• 제24권3호
• /
• pp.77-93
• /
• 1996

This paper is concerned with the International Standard ISO 2859-1 (1989), Sampling Plans Indexed by Acceptable Quality Level (AQL) for Lot-by-Lot Inspection, his standard is AQL type sampling scheme, and incorporates switching rules to move among normal, tightened, and reduced inspections. Sample size code letters and inspection levels of ISO 2859-1 are the same as those of other attributes standards MIL-STD-105D, ANSI Z1.4, and KS A 3109. But ISO 2859-1 has more simple switching rules than KS A 3109 has. The sampling procedures of the ISO 2859-1 are matched to the variables international standard ISO 3951 to enable us to move between them. Composite OC and ASN curves are given for AQL 2.5% and code letter F.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1999년도 제17회 학술발표회 논문개요집
• /
• pp.227-227
• /
• 1999

Plasma display panel(PDP) is a leading technology for large-area flat panel displays. A current issue in operating the PDP cell is that the efficiency of the PDP cell is very low. To increase the efficiency of the PDP cell, the visible light needs to be maximized and the power consumption minimized. Since the excited xenons are related to the production of the visible light, it is important to optimize the cell geometry and the gas composition that produce the excited xenons more efficiently. A 2D-fluid code (FL2P) is developed and used to simulate the plasma dynamics and the radiation transport in the PDP cell. The cell is optimized with the code for various operating conditions and cell dimensions such as the voltage pulse, electrode length, electrode spacing, gap size, dielectric constant, gas mixture ratio, pressure, and pulse duration.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제6권4호
• /
• pp.252-256
• /
• 2006

A low-power ECC check bit generator is presented with competent DRAM implementation with minimal speed loss, area overhead and power consumption. The ECC used in the proposed scheme is a variant form of the minimum weight column code. The spatial and temporal correlations of input data are analyzed and the input paths of the check bit generator are ordered for the on-line adaptable power savings up to 24.4% in the benchmarked cases. The chip size overhead is estimated to be under 0.3% for a 80nm 1Gb DRAM implementation.

• 정보통신설비학회논문지
• /
• 제8권4호
• /
• pp.207-215
• /
• 2009

In recent digital communication systems, the performance of Turbo Code used as the error correction coding method depends on the interleaver size influencing the free distance determination and iterative decoding algorithms of the turbo decoder. However, some iterations are needed to get a better performance, but these processes require large time delay. Recently, methods of reducing the number of iteration have been studied without degrading original performance. In this paper, the new method combining ME (Mean Estimate) stopping criterion with SDR (sign difference ratio) stopping criterion of previous stopping criteria is proposed, and the fact of compensating each method's missed detection is verified Faster decoding realizes that reducing the number of iterative decoding about 1~2 times by adopting our proposed method into serially concatenation of both decoder. System Environments were assumed DS-CDMA forward link system with intense MAI (multiple access interference).

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.248-253
• /
• 2000

This paper presents parametric study of long-rod penetration. Influences of yield stress of penetrator and target material on the penetration results such as crater size and penetrator residual length are contemplated. Numerical experiments are carried out with varying the value of static yield stress of materials. Lagrangian explicit code NET2D was used to perform parametric study. Element eroding algorithm was used to properly simulate long-rod penetration. Analytic and empirical model of long-rod penetration and Taylor test are used to explain the relationships of parameter and simulation results.

• 융합보안논문지
• /
• 제7권2호
• /
• pp.57-63
• /
• 2007

네트워크에서 데이터의 보안은 암호화에 의해 제공된다. 최근 영상이나 비디오와 같은 대용량의 데이터 파일의 암호화의 비용 및 복잡성을 줄이기 위한 방안으로 선택적 암호화가 제안되었다. 본 논문에서는 허프만 코딩으로 압축된 데이터의 암호화 방안을 제안하고 그 성능에 대해 논한다. 허프만 코드에 적용 가능한 단순한 선택적 암호화 방법을 제안하고 불안전한 채널에서 암호화 방법의 효율성에 대해 논의한다. 암호화 과정과 데이터 압축 과정이 하나로 결합될 수 있으며 그렇게 함으로서 데이터를 압축하고 암호화하는 과정을 간략화 하고 시간을 줄일 수 있다.