• Nuclear Engineering and Technology
• /
• 제50권6호
• /
• pp.829-841
• /
• 2018

An experiment was conducted for the OECD/NEA ROSA-2 Project using the large-scale test facility (LSTF), which simulated a 17% hot leg intermediate-break loss-of-coolant accident in a pressurized water reactor (PWR). In the LSTF test, core uncovery started simultaneously with liquid level drop in crossover leg downflow-side before loop seal clearing, and water remaining occurred on the upper core plate in the upper plenum. Results of the uncertainty analysis with RELAP5/MOD3.3 code clarified the influences of the combination of multiple uncertain parameters on peak cladding temperature within the defined uncertain ranges. For studying the scaling problems to extrapolate thermal-hydraulic phenomena observed in scaled-down facilities, an experiment was performed for the OECD/NEA PKL-3 Project with the Primarkreislaufe Versuchsanlage (PKL), as a counterpart to a previous LSTF test. The LSTF test simulated a PWR 1% hot leg small-break loss-of-coolant accident with steam generator secondary-side depressurization as an accident management measure and nitrogen gas inflow. Some discrepancies appeared between the LSTF and PKL test results for the primary pressure, the core collapsed liquid level, and the cladding surface temperature probably due to effects of differences between the LSTF and the PKL in configuration, geometry, and volumetric size.

• Nuclear Engineering and Technology
• /
• 제53권5호
• /
• pp.1403-1415
• /
• 2021

The transient capability of a SP₃ based pin-wise core analysis code SPHINCS is developed and verified through the analyses of the C5G7-TD benchmark. Spatial discretization is done by the fine mesh finite difference method (FDM) within the framework of the coarse mesh finite difference (CMFD) formulation. Pin size fine meshes are used in the radial fine mesh kernels. The time derivatives of the odd moments in the time-dependent SP₃ equations are neglected. The pin homogenized group constants and Super Homogenization (SPH) factors generated from the 2D single assembly calculations at the unrodded and rodded conditions are used in the transient calculations via proper interpolation involving the approximate flux weighting method for the cases that involve control rod movement. The simplifications and approximations introduced in SPHINCS are assessed and verified by solving all the problems of C5G7-TD and then by comparing with the results of the direct whole core calculation code nTRACER. It is demonstrated that SPHINCS yields accurate solutions in the transient behaviors of core power and reactivity.

• Nuclear Engineering and Technology
• /
• 제53권12호
• /
• pp.3966-3978
• /
• 2021

ISFRA (Integrated SFR Analysis Program for PSA) computer program has been developed for simulating the response of the PGSFR pool design with metal fuel during a severe accident. This paper describes validation of the ISFRA aerosol model against the Aerosol Behavior Code Validation and Evaluation (ABCOVE) experiments undertaken in 1980s for radionuclide transport within a SFR containment. ABCOVE AB5, AB6, and AB7 tests are simulated using the ISFRA aerosol model and the results are compared against the measured data as well as with the simulation results of the MELCOR severe accident code. It is revealed that the ISFRA prediction of single-component aerosols inside a vessel (AB5) is in good agreement with the experimental data as well as with the results of the aerosol model in MELCOR. Moreover, the ISFRA aerosol model can predict the "washout" phenomenon due to the interaction between two aerosol species (AB6) and two-component aerosols without strong mutual interference (AB7). Based on the theory review of the aerosol correlation technique, it is concluded that the ISFRA aerosol model can provide fast, stable calculations with reasonable accuracy for most of the cases unless the aerosol size distribution is strongly deformed from log-normal distribution.

• International Journal of Internet, Broadcasting and Communication
• /
• 제15권2호
• /
• pp.218-226
• /
• 2023

In Korea, we still use function point based cost estimations for software size and cost of a project. The current problem is that we make difficultly calculating function points with requirements and also have less accurate. That is, it is difficult for non-experts to analyze requirements and calculate function point values with them, and even experts often derive different function points. In addition, all stakeholders strongly make the validity and accuracy of the function point values of the project before /after the development is completed. There are methods for performing function point analysis using source code [1][2][3][4] and some researchers [5][6][7] attempt empirical verification of function points about the estimated cost. There is no research on automatic cost validation with source code after the final development is completed. In this paper, we propose automatically how to calculate Function Points based on natural language requirements before development and prove FP calculation based on the final source code after development. We expect validation by comparing the function scores calculated by forward engineering and reverse engineering methods.

• Structural Engineering and Mechanics
• /
• 제81권2호
• /
• pp.163-178
• /
• 2022

This paper aimed to study the local bond-slip behavior between ultra-high-performance concrete (UHPC) and a reinforcing bar after exposure to high temperatures. A series of pull-out tests were carried out on cubic specimens of size 150×150×150 mm with deformed steel bar embedded for a fixed length of three times the diameter of the tested deformed bar. The experimental results of the bond stress-slip relationship were compared with the Euro-International Concrete Committee (CEB-Comite Euro-International du Beton)-International Federation for Prestressing (FIP-Federation Internationale de la Precontrainte) Model Code and with prediction models found in the literature. In addition, based on the test results, an empirical model of the bond stress-slip relationship was proposed. The evaluation and comparison results showed that the modified CEB-FIP Model code 2010 proposed by Aslani and Samali for the local bond stress-slip relationship for UHPC after exposure to high temperatures was more conservative. In contrast, for both room temperature and after exposure to high temperatures, the modified CEB-FIP Model Code 2010 local bond stress-slip model for UHPC proposed in this study was able to predict the test results with reasonable accuracy.

• 천문학회보
• /
• 제46권2호
• /
• pp.42.1-42.1
• /
• 2021

Galaxy/Halo finding based on the friends-of-friend (FoF) algorithm has been widely adopted for its simplicity and expandability to the phase-space. However, cosmological simulations have been progressively bigger in size and more accurate in resolutions, resulting in that galaxy/halo finding gets computationally expensive more and more. In fact, we confirm this issue through our exercise of applying the 6-dimensional (6D) FoF galaxy finder code, VELOCIraptor (Elahi et al.2019) on the NewHorizon simulation (Dubois et al. 2021), in which typical galaxies with about 1e11 M_sun (10⁷ particles) are identified with very low speed (longer than a day). We have applied several improvements to the original VELOCIraptor code that solve the low-performance problem of galaxy finding on a simulation with high resolutions. Our modifications find the exact same FoF group and can be readily applied to any tree-based FoF code, achieving a 2700 (12) times speedup in the 3D (6D) FoF search compared to the original execution. We applied the updated version of VELOCIraptor on the entire NewHorizon simulation (834 snapshots) and identified its galaxies and halos. We present several quick comparisons of galaxy properties with those with GALAXYMaker data.

• 대한전자공학회논문지SD
• /
• 제46권8호
• /
• pp.41-52
• /
• 2009

Motion JPEG2000과 같은 동영상 압축 시스템에서는 데이터 메모리에 대한 빈번한 접근이 전체 시스템에 큰 병목 현상이 된다. 이처럼 시스템에서 요구하는 메모리의 대역폭을 감소시키기 위해서, 본 논문은 약간의 화질 손실이 있는 새로운 embedded compression(EC) 알고리즘과 구조를 고안하였다. 또한, 메모리 내의 압축된 데이터에 임의 접근성(Random Accessibility)과 짧은 지연 시간(Latency)을 보장하기 위해서 매우 단순하면서도 효율적인 entropy 부호화 방법을 제안하였다. 본 논문에서는 JPEG2000 표준안 알고리즘에는 어떠한 변경도 하지 않으면서, 제안한 multi-mode 알고리즘을 통해 JPEG2000 시스템에서 요구하는 메모리의 대역폭의 감소(약 52${\sim}$81%) 와 코드블록 메모리의 크기를 약 2 배 이상 감소시킬 수 있었다.

• 정보과학회 논문지
• /
• 제41권12호
• /
• pp.1018-1025
• /
• 2014

반환 지향 프로그래밍 공격(ROP)은 프로그램에 존재하는 반환 명령어로 끝나는 코드 조각들을 조합하여 가젯을 만들고, 연속적으로 실행하여 스택의 내용을 조작함으로써 프로그램의 제어권을 가져오는 공격이다. 이에 대한 기존 방어기법은 높은 실행 오버헤드와 바이너리 증가 오버헤드를 갖거나, 적용 범위의 제한이 있는 문제점이 있다. 본 논문에서는 기존 기법의 문제점을 갖지 않으면서 성능 및 바이너리 크기 증가 측면에서 효율적인 방어 기법인 zero-sum defender를 제안한다. 반환 지향 프로그래밍 공격은 정상적인 프로그램의 흐름과 다르게, 함수 호출 명령어가 실행되지 않고 여러 반환 명령어가 실행되는 실행 특성을 가진다. 제안 기법은 이러한 특성을 이용하여 프로그램 실행 흐름이 반환 지향 프로그래밍 공격에 의해 오용되는지 모니터링하여 방어 기능을 수행한다. 실제 공격 모델에 대한 실험을 통해 방어 기법의 효용성을 확인하였고, 벤치마크 실험을 통해 약 2%의 성능 오버헤드와 약 1%의 바이너리 크기 증가만으로 방어가 이루어짐을 확인하였다.

• 한국주거학회논문집
• /
• 제17권1호
• /
• pp.145-153
• /
• 2006

Making of agreement with participation subjects is important process laying stress on presentation and a reasonable design guide line to form space order grant and synthetic space in Housing Complex plan. This study analyzed residing application specific character of design guide line that is presented to architects in general planning laying stress on plan only of 'Bongmu-dong town house' and design agreement of by architectural result that appear analyze. Result that analyze is as following: 1) Confer in 18 plan contents and integrate design or was adjusted. Being main conduct and unit plan and residing only in plan many negotiations accomplish. Architect who confer most Designs of 5 architects is 'Jean Michel Wilmott' and 'Shigeru Ban' 2) contents that confer much in plan main conduct and unit generation were details plan. Contents that is conferred with many architects are about door/core/rooftop be and asked a question about proper size of entrance. Negotiation about size was expose to the tribe of knowledge about element that do furniture and detail of necessary each space in life style of our country. We must present furnitures or detail element that appear by emotion of our country and detailed item of furnitures' size etc.. in guide line. It is immediate that creation of guide that architects can approach easily for lacking abroad architects of interests by code difference in each country is pressing. 3) In residing plan 4 architects of 5 architects applied similarly guide line in design. Most architects look by active support that make synthetic housing complex. and this is construed that act positively to make by unified residing. That plan of woods or landscape architecture and security of green area space are thing to approach on 'Environment-friendly mode of life residing only' that is general planning subject of 'Bongmu-dong town house'. 4) common question items of architects guide line of though is refered definitely when make out effective interests plan. So that can overcome legislation difference, countermeasure to make understood construction code of our country is pressing

• 대한전자공학회논문지SD
• /
• 제37권3호
• /
• pp.55-61
• /
• 2000

본 논문에서는 MPEG-2 비디오 인코더의 프레임 인터페이스 모듈에 대한 효율적인 하드웨어 구조를 제안한다. 인코더 모듈과 SDRAM 사이의 메모리 버퍼 크기를 줄이기 위해, 한 매크로 블록에 필요한 메모리액세스 시간을 dual-bank 동작과 버스트 길이 변화를 사용하여 필요 클럭 수를 최소화 한다. 이 최소화된 메모리 액세스 방법으로 인해 남는 클럭 사이클을 랜덤 액세스 횟수로 할당함으로써, 내부버퍼 크기, 데이터버스의 폭과 제어논리회로의 크기를 줄일 수 있었다. 제안된 프레임 메모리 모듈은 54㎒의 주파수에서 동작하며 설계된 라이브러리는 VTI/sup тм/ 0.5㎛ CMOS TLM 표준셀공정을 사용하였다. 제안된 구조를 C-code하드웨어 모델에 의해 생성된 테스트 벡터와 합성된 회로의 모의실험 결과를 비교함으로써 검증하였다. 제안된 구조의 버퍼 면적은 기존 구조의 버퍼 면적의 40%로 줄일수 있었다.