• 한국콘텐츠학회논문지
• /
• 제21권8호
• /
• pp.403-412
• /
• 2021

모바일 앱의 수가 기하급수적으로 늘어남에 따라 앱 개발과정에서 이루어지는 테스트의 자동화가 중요해지고 있다. 앱을 출시하기까지 다양한 유형의 테스트를 통해 반복적인 검증이 이루어지는데, 다양한 유형의 테스트 중 GUI 테스트를 중심으로 본 연구는 진행되었다. 안드로이드의 GUI 테스트 자동화 툴을 개발하기 위해서 안드로이드 앱 테스트의 UI Control 16가지와 Material Design Guideline에 대해서 기초 자료를 수집하였다. 그 후 기존 GUI 테스트 자동화 툴에 대해서 스크린 캡처 테스트 기반 2가지 툴과 소스코드 분석 테스트기반 4가지 툴 분석을 하였다. 분석을 통해 기존의 GUI 테스트 자동화 툴들은 시각적 설계, 인터페이스 사용 용이성, 컴포넌트 배치에 대해서는 고려하지 않고 있다는 점을 파악하였다. 이러한 기존 툴의 미비점을 보완하고자 새로운 GUI 테스트 자동화 툴 개발 방법으로 컴포넌트 선정이나 관리 분석 그리고 컴포넌트별 소스코드 예시로 탐색 메뉴나 버튼, 아이템 그룹화나 리스트에 관한 방법을 제시하였다. 본 연구는 GUI 테스트의 새로운 개발 방향을 제시함으로써 개발사의 안정적인 앱 배포에 기여할 수 있다는 점에서 의의가 있다.

• 한국전자통신학회논문지
• /
• 제17권1호
• /
• pp.125-132
• /
• 2022

본 논문에서는 물류센터나 실내의 정해진 위치까지 짐을 자동으로 운반할 수 있는 카트를 라즈베리 파이4를 기반으로 구현하였다. 카트는 초음파 센서를 이용하여 장애물을 인식해 충돌을 방지하고 우회한다. RFID에 방향 제어 코드를 입력해 교차로나 목적지 등 주요 포인트에 설치하였고, 카트의 RFID 리더기가 RFID를 인식하면 정지하거나 상황에 따라 방향을 전환할 수 있도록 하였다. 운송이 끝난 후, 로드 셀(무게추 센서)이 물건이 내려짐을 인식하면 카트가 다시 출발 지점으로 돌아와 회수된다. 카트는 운송 과정에 필요한 인력의 소모를 줄이고 운송 과정을 편리하게 해결할 수 있도록 구현하였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제16권2호
• /
• pp.658-675
• /
• 2022

This paper presents a fast-simplified successive cancellation (SC) flipping (Fast-SSC-Flip) decoding algorithm for polar code. Firstly, by researching the probability distribution of the number of error bits in a node caused by channel noise in simplified-SC (SSC) decoder, a measurement criterion of node reliability is proposed. Under the guidance of the criterion, the most unreliable nodes are firstly located, then the unreliable bits are selected for flipping, so as to realize Fast-SSC-Flip decoding algorithm based on node reliability (NR-Fast-SSC-Flip). Secondly, we extended the proposed NR-Fast-SSC-Flip to multiple node (NR-Fast-SSC-Flip-ω) by considering dynamic update to measure node reliability, where ω is the order of flip-nodes set. The extended algorithm can correct the error bits in multiple nodes, and get good performance at medium and high signal-to-noise (SNR) region. Simulation results show that the proposed NR-Fast-SSC-Flip decoder can obtain 0.27dB and 0.17dB gains, respectively, compared with the traditional Fast-SSC-Flip [14] and the newly proposed two-bit-flipping Fast-SSC (Fast-SSC-2Flip-E2) [18] under the same conditions. Compared with the newly proposed partitioned Fast-SSC-Flip (PA-Fast-SSC-Flip) (s=4) [18], the proposed NR-Fast-SSC-Flip-ω (ω=2) decoder can obtain about 0.21dB gain, and the FER performance exceeds the cyclic-redundancy-check (CRC) aided SC-list (CRC-SCL) decoder (L=4).

• Nuclear Engineering and Technology
• /
• 제54권2호
• /
• pp.666-673
• /
• 2022

The optimization of a transmission type bremsstrahlung conversion target was carried out with Monte Carlo code FLUKA for intense pulsed electron beams with electron energy of several hundred keV for maximum photon fluence. The photon emission intensity from electrons with energy ranging from 300 keV to 1 MeV on tungsten, tantalum and molybdenum targets was calculated with varied target thicknesses. The research revealed that higher target material element number and electron energy leads to increased photon fluence. For a certain target material, the target thickness with maximum photon emission fluence exhibits a linear relationship with the electron energy. With certain electron energy and target material, the thickness of the target plays a dominant role in increasing the transmission photon intensity, with small target thickness the photon flux is largely restricted by low energy loss of electrons for photon generation while thick targets may impose extra absorption for the generated photons. The spatial distribution of bremsstrahlung photon density was analyzed and the optimal target thicknesses for maximum bremsstrahlung photon fluence were derived versus electron energy on three target materials for a quick determination of optimal target design.

• 한국농촌건축학회논문집
• /
• 제24권3호
• /
• pp.39-46
• /
• 2022

This study aims to derive basic living service facility items in rural areas and construct related spatial data. To do this, a literature review on the laws and systems related to the residential environment and services in rural areas, rural spatial planning, and the 'Rural Convention' strategic plan reports for the Jeolla and Gyeongsang Region in 2021 was conducted. Primary data collection and review on the list of basic living service items in rural areas derived from the analysis were conducted. After data collection, 12 sectors and 44 types of rural basic living service items were derived; the data selection was carried out based on the clarity of the subject of data management, whether it was established nationwide, whether it was disclosed and provided, whether it was periodically updated, and whether it was an underlying law. Afterwards, data on the derived rural basic living service items were constructed. Afterwards, spatial data on the derived rural basic living service items were constructed. Because open data provided through various institutions were employed, data structure unification such as data attribute values and code names was needed, and abnormal data such as address errors and omissions were refined. After that, the data provided in text form was converted into spatial data through geocoding, and through comparative review of the distribution status of the converted data and the provided address, spatial data related to rural basic living services were finally constructed for about 540,000 cases. Finally, implications for data construction for diagnosing rural living areas were derived through the data collection and construction process. The derived implications include data unification, data update system establishment, the establishment of attribute values necessary for rural living area diagnosis and spatial planning, data establishment plan for facilities that provide various services, rural living area analysis method, and diagnostic index development. This study is meaningful in that it laid the foundation for data-based rural area diagnosis and rural planning, by selecting the basic rural living service items, and constructing spatial data on the selected items.

• 대한본초학회지
• /
• 제37권5호
• /
• pp.37-51
• /
• 2022

Objectives : The purpose of this study was to apply informations related to herbal medicines to IDMP (Identification of Medicinal Products), an ISO standards related to medicinal products substances, for systematic collection of data through the integration of informations on distribution, manufacturing, and management of herbal medicines. Methods : By analyzing ISO 11238 and ISO/TS 19844, elements that can be used in the information model of herbal medicine were derived from the identification of medicinal products information model on substances. The labeling specified in the safety and quality control regulations for herbal medicines was mapped to the IDMP information model, and ginseng was applied as an example. Results : Herbal medicine corresponded to substance in IDMP. Among the five types of substances specified by IDMP, herbal medicines were expressed as structurally diverse. Scientific name was used as an invariant property of herbal medicine, and the substance level included information about source material and modification, and specifically included information about the scientific name, medicinal part, fraction, and processing. In addition, the specified substance level had information on the constituents, characteristic attributes, manufacturing, and grade of the herbal medicine. Conclusions : It is necessary to establish a code system for identifying herbal medicines. In order to apply the IDMP standards, research on the development of standard terms is required to express the characteristics of herbal medicines. In addition, information for identification of herbal medicines is also required, and information from production to consumption should be systematically accumulated and managed for actual application.

• Journal of the Korean Wood Science and Technology
• /
• 제32권5호
• /
• pp.45-50
• /
• 2004

현재 국내의 목구조 설계는 ASD (Allowable Structural Design)에 기초하여 이루어 지고 있다. 그러나 이 설계 방법은 재료의 변이와 설계에 따른 다양한 조건물을 충분히 고려하고 있지 못하고 있어 과설계의 원인이 되고 있다. 따라서 외국의 경우는 이를 극복하기 위하여 1990년 초반부터 확률론적인 접근을 통한 설계에 대한 연구가 꾸준히 진행되어 왔으며, 현재는 이에 기초한 설계 기준을 마련, 활용하고 있는 실정이다. 그러므로 본 연구에서는 국산재에 이러한 설계법을 도입하기 위하여 기존 연구에서 밝혀진 제재목과 집성재의 강도적 성능에 대한 분포 특성을 충분히 고찰하여 평균, 표준 편차, 분산, 변이 계수 동의 인자를 얻었고, 이를 통해서 국산낙엽송부재에 대해서 기존의 ASD 코드를 RBD (Reliability Based Design) 코드로 전환하여 기본적인 코드 전환 체계를 갖추고자 하였으며. RBD 코드로의 전환 시 따르게 되는 중요 변수 즉 시편 수에 대한 고찰을 하였다. 또한, 적어도 각 시편에 대해서 적어도 500개 이상의 반복수가 있어야만 어느 정도 정확한 값을 얻을 수 있음을 확인할 수 있었다.

• International Journal of Internet, Broadcasting and Communication
• /
• 제14권3호
• /
• pp.193-204
• /
• 2022

The 2018 Seoul Zero Pay is a policy actively promoted by the government as an economic stimulus package for small business owners and the self-employed who are experiencing economic depression due to COVID-19. However, the controversy over the effectiveness of Zero Pay continues even after two years have passed since the implementation of the policy. Zero Pay is a joint QR code mobile payment service introduced by the government, Seoul city, financial companies, and private simple payment providers to reduce the burden of card merchant fees for small business owners and self-employed people who are experiencing economic difficulties due to the economic downturn., it was attempted in the direction of economic revitalization for the return of alleyways[1]. Therefore, this study intends to draw implications for improvement measures so that the ongoing zero-pay can be further activated and the economy can be settled normally. The analysis results of this study are as follows. First, it shows the effect of increasing the income of small business owners by inducing consumption in alleyways through the economic revitalization policy of Zero Pay. Second, the issuance and distribution of Zero Pay helps to revitalize the local economy and contribute to the establishment of a virtuous cycle system. Third, stable operation is being realized by the introduction of blockchain technology to the Zero Pay platform. In terms of academic significance, the direction of Zero Pay's policies and systems was able to identify changes in the use of Zero Pay through big data analysis. The implementation of the zero-pay policy is in its infancy, and there are limitations in factors for examining the consumer image perception of zero-pay as there are insufficient prior studies. Therefore, continuous follow-up research on Zero Pay should be conducted.

• 대한조선학회논문집
• /
• 제60권4호
• /
• pp.266-277
• /
• 2023

In this study, fundamental research is conducted for the generation technique and analysis of multi-directional irregular waves in the Deep Ocean Engineering Basin (DOEB). A three-dimensional boundary element method-based numerical tank is implemented to perform wave generation simulations, and directional spectrum estimation is carried out using the results of simulations. The wave generation technique of the Snake type wave maker, generating multi-directional irregular waves, is implemented using the Fast Fourier Transform (FFT) and Inverse Fast Fourier Transform (IFFT) algorithms. The wave generation technique is validated by comparing the wave spectrum from simulations and experiments. A Maximum Likelihood Method (MLM) based estimation code is developed for estimating the directional wave spectra. The multi-directional irregular waves are tested in the DOEB and the numerical tank, and directional wave spectra obtained from two methodologies are estimated and compared. A correction procedure for the directional distribution of multi-directional waves is established, and the possibility of correcting the directional spreading function using the numerical tank is validated.

• 천문학회보
• /
• 제45권1호
• /
• pp.38.2-38.2
• /
• 2020

Horizon Run 5 (HR5) is a cosmological hydrodynamical simulation which captures the properties of the Universe on a Gpc scale while achieving a resolution of 1 kpc. This enormous dynamic range allows us to simultaneously capture the physics of the cosmic web on very large scales and account for the formation and evolution of dwarf galaxies on much smaller scales. Inside the simulation box. we zoom-in on a high-resolution cuboid region with a volume of 1049 × 114 × 114 Mpc3. The subgrid physics chosen to model galaxy formation includes radiative heating/cooling, reionization, star formation, supernova feedback, chemical evolution tracking the enrichment of oxygen and iron, the growth of supermassive black holes and feedback from active galactic nuclei (AGN) in the form of a dual jet-heating mode. For this simulation we implemented a hybrid MPI-OpenMP version of the RAMSES code, specifically targeted for modern many-core many thread parallel architectures. For the post-processing, we extended the Friends-of-Friend (FoF) algorithm and developed a new galaxy finder to analyse the large outputs of HR5. The simulation successfully reproduces many observations, such as the cosmic star formation history, connectivity of galaxy distribution and stellar mass functions. The simulation also indicates that hydrodynamical effects on small scales impact galaxy clustering up to very large scales near and beyond the baryonic acoustic oscillation (BAO) scale. Hence, caution should be taken when using that scale as a cosmic standard ruler: one needs to carefully understand the corresponding biases. The simulation is expected to be an invaluable asset for the interpretation of upcoming deep surveys of the Universe.