• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.582-584
• /
• 2007

In order to improve the accuracy of simulated results, new UV source was designed. Previously the optical simulation was performed with the symmetric planar UV source. To design new UV source, UV distribution from the plasma fluid code was implanted to the 3-dimensional optical code to generate the visible light distribution. The results from planar UV source and new UV source were compared with the ICCD (Intensified CCD) image in real PDP cell and analyzed the variation of geometries and optical properties.

• 한국산업융합학회 논문집
• /
• 제4권2호
• /
• pp.157-166
• /
• 2001

The purpose of this study is to examine the accuracy of the code provisions on lateral load distribution factors of prestressed concrete girder bridges. Most designers in Korea use the lever method or lateral load distribution formula in the existing design codes. However, the methods do not account for the effect of bridge skew or direction of diaphragm. Therefore, this study analysed the prestressed concrete girder bridge with grillage model for various girder spacings, directions of diaphragms, span lengths, and skews, and compared the results with those of existing design code. It has been found that lateral load distribution factors were proportional to the girder spacing while they were not significantly affected by the change of span length, direction of diaphragm, and skew. For bending moments, lateral load distribution factors from the grillage analysis were 60%~68% of those from Korean bridge design code. Therefore, the code provisions result in very conservative design. For support reactions, however, lateral load distribution factors from the grillage analysis were slightly greater than those from Korean bridge design code. Therefore, the capacity of bearings of the bridge with a large skew should be determined by grillage analysis.

• 한국공간정보시스템학회 논문지
• /
• 제11권2호
• /
• pp.13-18
• /
• 2009

This paper presents the implementation procedure of encoding and decoding algorithms for Tornado code that can provide fault tolerance for storage and transmission system. The degree distribution satisfying heavy tail distribution is produced. Based on this distribution, a good random irregular bipartite graph is attained after plenty of trails. Such graph construction is proved to be efficient, and the experiments also demonstrate that the implementation obtains good performance in terms of decoding overhead.

• 반도체디스플레이기술학회지
• /
• 제6권2호
• /
• pp.41-44
• /
• 2007

Optical simulation of the rear and front panel geometries were needed to improve the luminance and efficiency in PDP cells. The 3-dimensional optical code can be used to analyze the variation of geometries and changing of optical properties. In order to improve the accuracy of simulated results, a new UV source, called a multi-cubes UV source, was designed. To design the source, at first UV distribution was calculated with the plasma fluid code and then the UV distribution was transformed to the multi-cube structures in the optical code. Compared to the results from existing UV source, called a planar UV source, could be improved the accuracy of visible light distribution. Simulated results were also compared to the visible distribution measured with the ICCD in a real PDP cell.

• 대한안전경영과학회지
• /
• 제8권5호
• /
• pp.99-117
• /
• 2006

Consumers keep demanding for diversified high quality products, valuable services and safety. With this in mind, Distribution Industry is being updated rapidly to accomodate this demand. Meanwhile, Distribution Information Technology of agricultural products has been in slow progress with little in-depth studies. In this study, it has been analyzed the usage of Bar code which is the key element for agricultural Distribution Information Technology. The analysis was conducted through a survey utilizing questionnaire covering 5 Hypermarkets(Super-centers) including big 3 companies. Also, Japanese market trends have been studied to visit a Japan Government Organization concerned, GS1 Japan, an Agricultural Cooperative, an Agricultural Wholesale Market, and a Retail Company. If we could use KAN code for all agricultural products, we could collect and analyze the information of price and trade quantity of them. It opens a new era to understand the agricultural products supply and demand easily. This will certainly make a great contribution to the evolution of agricultural products distribution. From this research, it is suggested that collective efforts by suppliers, wholesalers, retailers and Government Officers are needed to make large scale mutual marketing Organizations, which specialize in sending out agricultural products. The Organization is recommended to standardize and pack every final agricultural products, to promote the use of KAN code.

• 콘크리트학회논문집
• /
• 제23권3호
• /
• pp.365-376
• /
• 2011

현행 콘크리트구조설계기준(2007)은 콘크리트 구조물의 설계에 적용하는 콘크리트의 압축응력 분포로 ACI 318의 등가 직사각형 응력 분포를 규정하고 있다. 단면의 휨강도 해석에는 등가 직사각형 응력 분포가 충분하겠지만, 성능 중심 설계의 한계 상태 검증에는 실제와 가까운 압축응력-변형률 관계가 필요하다. 또 등가 직사각형 응력 분포는 고강도 콘크리트 기둥의 휨강도 해석에 비안전측의 결과를 준다는 것이 알려져 있으므로, 이를 대신하는 새로운 응력 분포 모델이 필요하다. 이 연구에서는 Eurocode와 일본 토목학회의 설계기준에서 채택하고 있는 포물선-직선 형상의 새로운 모델을 제안하였다. 이 응력 분포 모델은 이 연구에서 수행된 압축응력 분포 실험과 타 연구자들의 실험 결과를 분석하여 도출된 것으로서, 보통 강도뿐만 아니라 고강도 콘크리트를 포함한 것이다. 제안 모델의 특성은 미국 ACI 318, 캐나다 CSA, 유럽의 Eurocode, 일본 토목학회 설계기준의 응력 분포 모델과 함께 실험 결과와 비교하여 정리하였다.

• Journal of the Korean Wood Science and Technology
• /
• 제38권2호
• /
• pp.94-100
• /
• 2010

This study was performed to develop an LRFD (Load Resistance Factored Design) Code for Domestic Larch. To accomplish his, we evaluated bending, compression, tension and shear strength. The results of the strength evaluation were utilized to verify the distribution and code conversion. For bending, tension and compressive strength, the Weibull distribution was well-fitted, but for shear strength we observed a normal distribution. For evaluating the bending and compressive strength, a full-sized specimen was used. A small clear specimen was used to test tension and shear strength. Compressive strength in particular was found to be affected by tight knots, although there was little difference between grades. In the code conversion, the design value of the LRFD was larger than the existing allowable stress value in the Korean Building Code. However, the allowable stress in this study was about two times higher than the value listed in the Korean Building Code. This result induced the difference between the soft and hard conversions. For greater reliability, the accumulation of additional data is necessary and further studies should be performed

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2010년도 하계학술대회
• /
• pp.112-115
• /
• 2010

본 논문은 그림 1과 같은 네트워크 환경에서 두 송신단이 LT code를 오류정정 부호로 사용할 때, 두 송신단이 생성하는 인코딩 심볼과 수신단이 수신하는 인코딩 심볼들의 degree distribution의 관계에 대해 다룬다. LT code를 복호하기 위해 belief propagation 방법을 사용했을 때, 수신단이 받은 인코딩 심볼들의 degree distribution은 robust soliton distribution(RSD)을 따를 때, overhead 대비 가장 높은 확률로 복호에 성공한다. 하지만 그림 1과 같은 네트워크 환경에서, 두 송신단 모두 RSD에 따라 인코딩 심볼을 생성하여 송신하면, 수신단에서 수신한 심볼은 RSD를 따르지 않는다. 본 논문은 한 송신단($S_1$) 이 생성하는 인코딩 심볼의 degree distribution을 알 때, 수신단에서의 인코딩 심볼의 분포가 근사적으로 RSD를 따르도록 하는 또 다른 송신단($S_2$)에서의 degree distribution을 구하는 방법을 제시한다.

• 전자공학회논문지A
• /
• 제33A권7호
• /
• pp.23-33
• /
• 1996

This paper deals with the design of a recursively-indexed binary code for facsimile soruces and its performance. Sources used here are run-lengths of white pixels form higher-resolution facsimile. The modified huffman code used for G.3 facsimile is chosen for the performance comparison. Experiments confirm the fact that recursive indexing preserves the entropy of a memoryless geometric source: the entropy of recursively-indexed physical surce iwth roughly geometric distributin remains within 2% of the empirical source entropy. The designed recursively-indexed binary codes consist of a code applied to text-type documents and to graphics - type documents is compared iwth that of the modified huffman code. Numerical resutls show that the modified huffman code performs well for text-type documents and not equally well for graphics-tyep documents. On the other hand, recursively-indexed binary codes have shown a better performance for graphics-type documents whose distribution are similar to a geometric distribution. Specifically, the code rates of recursively-indexed binary codes with 60 codewords are from 8% to 20% of the empirical source entropy smaller than that of th emodified huffman code with 91 codewords.

• ETRI Journal
• /
• 제43권2호
• /
• pp.184-196
• /
• 2021

The research domain of underwater communication has garnered much interest among researchers exploring underwater activities. The underwater environment differs from the terrestrial setting. Some of the main challenges in underwater communication are limited bandwidth, low data rate, propagation delay, and high bit error rate (BER). As such, this study assessed the underwater acoustic (UWA) aspect and explored the expression of error performance based on t-distribution noise. Filter orthogonal frequency-division multiplexing refers to a new waveform candidate that has been adopted in UWA, along with turbo and polar codes. The empirical outcomes demonstrated that the noise did not adhere to Gaussian distribution, whereas the simulation results revealed that the filter applied in orthogonal frequency-division multiplexing could significantly suppress out-of-band emission. Additionally, the performance of the turbo code was superior to that of the polar code by 2 dB at BER 10-3.