• Journal of Korean Library and Information Science Society
• /
• v.25
• /
• pp.377-404
• /
• 1996

The purpose of this study is to investigate material designation in library cataloging and to suggest General Material Designation (GMD) and Specific Material Designation(SMD) in Korean. A summary of the study follows. In library cataloging, methods of indicating the type of material are : (1) color-coding, (2) media code as part of the call number, (3) material designation in physical description area or note area, (4) GMD and SMD. GMD is a term indicating the broad class of material to which a bibliographic item belongs. SMD is a term indicating the special class of material to which a bibliographic item belongs. GMD was listed in parenthesis following the title proper before AACR1975 code, but currently it is listed in square brackets after the AACR1975 code. AACR2 was the standard cataloging rule in GMD and SMD terminology. It is suggested that GMD be used in Korean for graphic material, sound recordings, drawings, microform, multimedia, videorecordings, manuscripts, photographs, slides, printed music, motion pictures, printed texts, objects, braille, cartographic materials, computer files and transparenies.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.65 no.1
• /
• pp.41-46
• /
• 2016

It has been proven that the dissolved gas analysis (DGA) is the most effective and convenient method to diagnose the transformers. The DGA is a simple, inexpensive, and non intrusive technique. Among the various diagnosis methods, IEC 60599 has been widely used in transformer in service. But this method cannot offer accurate diagnosis for all the faults. This paper proposes a fault diagnosis method of oil-filled power transformers using IEC code based neuro-fuzzy model. The proposed method proceeds two steps. First, IEC 60599 method is applied to diagnosis. If IEC code can't determine the fault type, neuro-fuzzy model is applied to effectively classify the fault type. To demonstrate the validity of the proposed method, experiment is performed and its results are illustrated.

• 한국전산유체공학회:학술대회논문집
• /
• 2010.05a
• /
• pp.5-9
• /
• 2010

A numerical wind tunnel simulation is performed in order to predict wind loads acting on a building. The aim of the present study is to suggest a guideline for the numerical wind tunnel analysis, which could provide more detail wind load distributions compared to the wind code and expensive wind tunnel experiments. To validate the present numerical simulation, wind-induced loads on a 6 m cube model is predicted. Atmospheric boundary layer is used as a inlet boundary condition. Various effect of numerical methods are investigated such as size of computational domain, grid density, turbulence model and discretization scheme. The appropriate procedure for the numerical wind tunnel analysis is suggested through the present study.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.6
• /
• pp.2576-2590
• /
• 2020

The fundamental reason why most SQL injection detection methods are difficult to use in practice is the low reusability of the implementation code. This paper presents a reusable SQL injection detection method for Java Web applications based on AOP (Aspect-Oriented Programming) and dynamic taint analysis, which encapsulates the dynamic taint analysis processes into different aspects and establishes aspect library to realize the large-grained reuse of the code for detecting SQL injection attacks. A metamodel of aspect library is proposed, and a management tool for the aspect library is implemented. Experiments show that this method can effectively detect 7 known types of SQL injection attack such as tautologies, logically incorrect queries, union query, piggy-backed queries, stored procedures, inference query, alternate encodings and so on, and support the large-grained reuse of the code for detecting SQL injection attacks.

• 한국전산유체공학회:학술대회논문집
• /
• 2005.04a
• /
• pp.123-127
• /
• 2005

The numerical analyses of the complicated flows are widely attempted in these days. Because of the enormous demanding memory and calculation time, parallel processing is used for these problems. In order to obtain calculation efficiency, it is important to choose proper domain decomposition technique and numerical algorithm. In this research we enhanced the efficiency of the CFDS code developed by ADD, using parallel computation and newly developed numerical algorithms. For the huge amount of data transfer between blocks non-blocking method is used, and newly developed data transfer algorithm is used for non-aligned block interface. Recently developed RoeM scheme is adpoted as a spatial difference method, and AF-ADI and LU-SGS methods are used as a time integration method to enhance the convergence of the code. Analyses of the flows around the ONERA M6 wing and the high angle of attack missile configuration are performed to show the efficiency improvement.

• 한국전산유체공학회:학술대회논문집
• /
• 2011.05a
• /
• pp.169-172
• /
• 2011

Recently, railroad long tunnels are increasing and growing longer due to topological feathers like a lot of mountain in Korea. But fire disaster of a long tunnel cause many people to injury and death. For that reason, at the early design stage of a long tunnel, risk assessment and mitigation measure of risk for satisfying tunnel safety are required. According to the railroad facility safety standard (Korean MLTM Announcement No. 2006-395), risk assessment for railroad-tunnel fire should be performed when design stage. Therefore, various methods of risk assessment for tunnel fire have been studied and applied. In the paper, QRA(Quantitative Risk Analysis) for fire risk assessment by using CFD code is presented and the usefulness of CFD is discussed.

• Journal of the Semiconductor & Display Technology
• /
• v.11 no.1
• /
• pp.67-71
• /
• 2012

The optical properties of PDP, such as the transmittance and reflectance, were analyzed with 3D optical code. Three different ITO-less structures in the front panel are examined. In the assembled panel study, the test 1 structure shows 16.6% and 10.2% higher reflectance than the structures of tests 2 and 3, respectively. In order to check the validation of the simulation result, three 7.5-inch test panels having the same geometry and property are fabricated as simulation models. The calculated reflective properties are compared to the measured data from real panels. The relative difference extracted from the simulation and measurement methods is less than 4.9% and are well matched.

• International Journal of CAD/CAM
• /
• v.11 no.1
• /
• pp.27-32
• /
• 2011

The increase in the productivity and the assurance of quality machining on the NC machines depends on, amongst other things, the perfection of the programming using adequate methods of interpolation. The programming language is until now based on the code ISO 6983 which defines the principles of the code G. This latter is not well adapted to the new strategies of machining imposed by the machining of complex surfaces and machining at high speed with the increasingly more severe requirements of precision. The CNC which adopt the interpolation of NURBS (Non Uniform Rational B-spline) are very rare (FANUC Siemens${\ldots}$). Based on the advantages of NURBS (continuity, flexibility, smoothing$.{\ldots}$), new formats G are currently developed but their use is still very limited. Our work consists on putting forward these new approaches of programming using the interpolation of NURBS. For this reason, a program capable to trace NURBS trajectories under Visual BASIC 6.0 was developed. This program was used thereafter in CAM software for the generation of NURBS formats like their new formats NC.

• Structural Engineering and Mechanics
• /
• v.55 no.5
• /
• pp.901-911
• /
• 2015

The goal of this study is to investigate computational convergence of optimal solutions, with respect to optimality criteria (OC) method and methods of moving asymptotes (MMA) as optimization model for non-linear programming of material topology optimization using an acceleration method that makes design variables rapidly move toward almost 0 and 1 values. 99 line topology optimization MATLAB code uses loop vectorization and memory pre-allocation as properly exploiting the strengths of MATLAB and moves portions of code out of the optimization loop so that they are only executed once as restructuring the program. Numerical examples of a simple beam under a lateral load and a given material density limitation provide merits and demerits of the present OC and MMA for 99 line topology optimization code of continuous material topology optimization design.

• Journal of Korea Society of Industrial Information Systems
• /
• v.5 no.2
• /
• pp.9-15
• /
• 2000

In this paper, we proposed a content-based image retrieval method using color and object's complexity for indexing of image database. Generally, the retrieval methods using color feature can not sufficiently include the spatial information in the image. So they are reduced retrieval efficiency. Then we combined object's complexity which extracted from chain code and the conventional color feature. As a result, experiments shooed that the proposed method which considers the shape feature improved performance in conducting content-based search.