• 구강회복응용과학지
• /
• 제36권1호
• /
• pp.1-11
• /
• 2020

목적: 본 연구의 목적은 polyetherketoneketone (PEKK)의 표면 처리 방식에 따른 세가지 종류의 임시 보철물 제작용 레진과의 전단결합강도를 비교하는 것이다. 연구 재료 및 방법: 60개의 PEKK 시편을 110 ㎛의 산화알루미늄 입자(Cobra, Renfert GmbH, Hilzinge, Germany)로 분사 처리하고 시편에 Visio.link (Bredent, Senden, Germany)를 도포하지 않은 군(U)과 도포한 군(P)으로 30개씩 나누었다. 이후 한 변이 3.2 mm인 정사각형의 모양으로 polymethylmethacrylate (PMMA), polyethylmethacrylate (PEMA), bis-acryl composite resin을 PEKK에 각각 20개씩 접착하여 총 6개의 군(UM, UE, UC, PM, PE, PC)으로 분류하였다. 완성된 시편은 37℃의 증류수에 24시간 보관하였다. 만능재료시험기의 크로스헤드의 속도를 2 mm/min로 설정하고 전단결합강도를 측정하였다. 각 군간의 전단결합강도 값의 유의차를 확인하기 위하여 일원배치분산분석(one-way ANOVA)과 Tukey HSD test를 시행하였다. 결과:UM, UE군은 UC군과 유의한 전단결합강도의 차이를 나타내었다(P < 0.05). PC군이 UC군보다 높은 전단결합강도를 나타내었다(P < 0.05). 결론: 임상적으로 PEKK에 PMMA와 PEMA를 접착하는 경우에 Visio.link의 적용이 필요하지 않으나, bis-acryl composite resin을 접착하는 경우에는 Visio.link의 적용이 추천된다.

• 한국임상수의학회지
• /
• 제27권6호
• /
• pp.740-745
• /
• 2010

동맥관개존증은 출생 후에도 폐동맥과 하행대동맥 사이에 동맥관이 지속적으로 열려 있는 선천성 심장질환이다. 동맥관개존증은 외과적인 결찰술로 폐쇄할 수 있지만, 다양한 도구를 이용한 동맥관개존증의 중재적 치료술은 비침습적인 치료과정과 시술 후 관리의 최소화의 이유로 빠르게 대체되고 있다. 소형품종에서의 중재적인 치료술은 동맥의 크기가 작기 때문에 혈관으로의 접근성이 주요한 문제점이 된다. 비록 경정맥을 이용한 정맥 접근법이 개발되었으나 이 기술은 동맥관에 폐색장치를 장착시키기 위해서 숙달된 기술이 필요하며, 폐색 장치 (색전 코일이나 혈관폐색장치)가 예기치 않게 잘못 장착될 위험성을 가지고 있다. 따라서, 우리는 이번 연구에서 소형품종 (체중3 kg미만)에서 대퇴동맥 접근을 통한 미니 혈관카테타를 이용한 변형된 코일 색전법을 개발하였다. 이러한 변형된 방법을 통하여 우리는 좌우 단락된 동맥관개존증을 가진 두마리의 소형품종 (말티즈)을 성공적으로 치료하였다.

• International journal of advanced smart convergence
• /
• 제6권2호
• /
• pp.51-58
• /
• 2017

Recently, rapid advances of Ethernet and IP technology have brought many changes in the sound industry. In addition, due to AoIP-based audio transmission technology, various problems of the acoustic system (sound quality deterioration due to long distance transmission, complicated wiring) have improved dramatically. However, when many distributed audio systems are connected with AoIP equipment, if there is a problem in the equipment, it is impossible to operate the connected system. AoIP equipment only can transmit audio signals but cannot adjust the system for acoustic environment. In this paper, AoIP equipment is to be installed with sound equipment on a one-to-one basis, so that various existing problems can be solved and adjustment of sound quality (reverberation, echo, delay and EQ) can be possible by AoIP-based OAC (On-site Audio Center) with built-in DSP function. As a result, uncompressed real-time transmission by distributed transmission/receipt module in OAC (On-site Audio Center) and high quality sound by adjustment of sound quality with built-in DSP can be acquired. It is expected that OAC based sound system will be the industry standard in ubiquitous environment.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1996년도 춘계학술발표회논문집(2)
• /
• pp.379-384
• /
• 1996

Thermal-hydraulic performance has been analyzed for an advanced reactor core loaded with hexagonal fuel assemblies. Currently available CHF prediction models and data base for triangular lattice bundles have been thoroughly reviewed, and as a result the KfK-3 CHF correlation with limit CHFR of 1.235 has been determined to be most appropriate. The pressure drop model in COBRA-IV-I code has been modified for the analysis of triangular lattice rod bundles. In view of maximizing the thermal margin, the geometry of a hexagonal fuel assembly, such as rod diameter and rod pitch, has been optimized with a fixed fuel assembly cross sectional area The optimum value of the moderator-to-fuel volume ratio is estimated to lie between 0.65 to 1 with 9.5 mm rod diameter. The thermal margin of these hexagonal fuel assemblies in the AP600 core has been evaluated and compared with that of square lattice fuel assemblies such as VANTAGE-5H and KOFA. The analysis result shows that the performances of hexagonal fuel assemblies are more favorable than the square fuel assemblies in the aspect of steady-state overpower margin.

• Nuclear Engineering and Technology
• /
• 제22권2호
• /
• pp.95-100
• /
• 1990

유체 유동상의 인자로 구성된 핵연료집합체에 걸리는 수력적 양력의 정확한 표현식은 핵연료의 건전성 설계 및 해석에 중요한 인자이다. 그러나 현재까지 이 양력에 대한 이론적인 해석이 제대로 이루어지고 있지 않아 이 분야에 혼란이 빚어지고 있다. 본 논문에서는 핵연료 집합체에 걸리는 수력적 양력에 대한 정확한 표현식을 이론적인 고찰을 통하여 유도하였으며 또한 양력에 관련된 제반 힘 요소들 즉, 압력강하, 부력, 전단응력, 집합체하중, 상호간의 관계를 검토하였다. 유도된 정확한 이론식을 이용하여 양력에 관한 간이식 오차의 특성을 분석한 결과 오차는 4가지 항으로 구성됨과 총 오차의 크기는 노심 유량의 변화 방향에 따라 달라짐을 알 수 있었다. 정량적인 분석을 COBRAIV-I를 이용하여 수행한 결과 총 오차의 크기는 약 1% 정도임이 밝혀졌다.

• Nuclear Engineering and Technology
• /
• 제33권3호
• /
• pp.283-297
• /
• 2001

The CHF in PWR rod bundles is usually predicted by the local flow correlation approach based on subchannel analysis while difficulty exists due to the existence of spacer grids especially with mixing vanes. In order to evaluate the effect of spacer grids on CHF, the experimental rod bundle data with various types of spacer grids were analyzed using the subchannel code, COBRA-IV-i. For the Plain grid data, a CHF correlation was described as a function of local flow conditions and heated length, and then the residuals of the CHF in mixing vaned grids predicted by the correlation were examined in various kinds of grids. In order to compensate for the residual, three parameters, distances between grids and from the last grids to the CHF site, and equivalent hydraulic diameter were introduced into a grid parameter function representing the remaining effect of spacer grids predicted most of the CHF data points in plaing grids within $\pm$20 percent error band. Good agreement with the CHF data was also shown when the grid parameter function for mixing vaned grids of a specific design was used to compensate for the residuals of the CHF data predicted by the correlation.

• 한국전문물리치료학회지
• /
• 제20권3호
• /
• pp.27-35
• /
• 2013

The aim of this study was to compare the electromyographic (EMG) activity levels of the scapular upward rotators [upper trapezius (UT), lower trapezius (LT), and serratus anterior (SA)] and other scapular muscles [posterior deltoid (PD), levator scapulae (LS), and infraspinatus (IS)] during isometric lower trapezius exercises. Twenty males with no medical history of shoulder pain or upper extremity disorders were recruited for this study. EMG activity was recorded from the UT, LT, SA, PD, LS, and IS while subjects performed three different exercises: Prone arm lift (PAL), Backward rocking diagonal arm lift (BRDAL), Modified Prone Cobra (MPC). One-way analysis of variance (ANOVA) was used to determine any significant differences among the three exercises. A lower relative activation of UT, LT, and SA was seen with the MPC than with the other exercises (p<.05). The relatively lower activation of the UT identified, the MPC exercise as the preferred choice for preferential strengthening the LT (p<.05). However, a higher activation in the PD, LS, and IS occurred with the MPC than with the other exercises (p>.05). The recruitment pattern of synergist varied depending on the exercise posture. These findings suggest that exercise posture is an important factor in the selection of strengthening exercise for weak muscle.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1997년도 추계학술발표회논문집(1)
• /
• pp.534-539
• /
• 1997

A CHF table method has been assessed in this study for rod bundle CHF predictions. At the conceptual design stage for a new reactor, a general critical heat flux (CHF) prediction method with a wide applicable range and reasonable accuracy is essential to the thermal-hydraulic design and safety analysis. In many aspects, a CHF table method (i.e., the use of a round tube CHF table with appropriate bundle correction factors) can be a promising way to fulfill this need. So the assessment of the CHF table method has been performed with the bundle CHF data relevant to pressurized water reactors (PWRs). For comparison purposes, W-3R and EPRI-1 were also applied to the same data base. Data analysis has been conducted with the subchannel code COBRA-IV-I. The CHF table method shows the best predictions based on the direct substitution method. Improvements of the bundle correction factors, especially for the spacer grid and cold wall effects, are desirable for better predictions. Though the present assessment is somewhat limited in both fuel geometries and operating conditions, the CHF table method clearly shows potential to be a general CHF predictor.

• Restorative Dentistry and Endodontics
• /
• 제19권1호
• /
• pp.106-113
• /
• 1994

Dental professions are considered high risk for contracting hepatitis infection. In Korea, many patients are hepatitis B virus carriers. HBV are most efficiently transmitted by blood. Root canal treatment, as in cases of acute pulpitis always accompanied by contaminated blood. Therefore it is absolutely necessary to use irrigation solutions having strong antiviral effect for prophylaxis both dental personnel and patients. The purpose of this study was to investigate the antiviral effect of seven root canal irrigation solutions by radioimmunometric test. The solutions were 5% sodium phyochlorite, 5% cresol, 2% glutaraldehyde, 3% hydrogen peroxide, 0.05% chlorohexidine, 10% iodine, and 70% isoprophyl alcohol. Each irrigation solutions was mixed with serum preparated from HBsAg positive patients and sera were diluted to 1:1. 1:4. 1:20 and 1:100. Percentage of radioactivity was assayed with AUK(Sorbin biomedica, Italy) and COBRA(Packwood Instrument company, USA). Sodium hypochlorite and glutaraldehyde showed most strong antivral activity against HBsAg. Isoprophyl alcohol had moderate antiviral effect and the effect and the effect was increased especially in 1:4 solution. Hydrogen peroxide exihibited very weak aintivral activity. Cresol, chlorohexidine, and iodine exhibited little antiviral activity.

• 방사성폐기물학회지
• /
• 제19권2호
• /
• pp.205-214
• /
• 2021

Currently, the interim storage pools of spent fuels in South Korea are expected to become saturated from 2024. It is required to prepare an operation plan of a domestic dry storage facility during a long-term period, with the researches on safety evaluation methods. This study modified the FRAPCON code to predict the spent fuel integrity evaluation such as the axial cladding temperature, the hoop stress and hydrogen distribution in dry storage. The cladding temperature in dry storage was calculated using the COBRA-SFS code with the burnup information which was calculated using the FRAPCON code. The hoop stress was calculated using the ideal gas equation with spent fuel information such as rod internal pressure. Numerical analysis method was used to calculate the degree of hydrogen diffusion according to the hydrogen concentration and temperature distribution during a dry storage period. Before 50 years of dry storage, the cladding temperature and hoop stress decreased rapidly. However, after 50 years, they decreased gradually and the cladding temperature was below 400 K. The initial temperature distribution and hydrogen concentration showed a parabolic line, but hydrogen was transferred by the hydrogen concentration and temperature gradient over time.