• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.2
• /
• pp.70-77
• /
• 2003

In this paper, analysis and measurement on coaxial connecter designed for packaging of microwave and micro strip transition structure are carried out. Even though researches on optimization of various kinds of transition structures have been conducted actively; however, the range of the application was very limited since they have been focused mainly on improvement of specific transmission line. Therefore, in this paper, we tried to analyze three kinds of substrates of which dielectric constants are 2,5,10 and are commercially used nowadays. Besides, we have confirmed reliability of FEM analysis, extracted equivalent circuit of transition area, found out factors determining extracted physical values, and made proof of electromagnetic variations for optimum characteristics. In addition, transition structure showing optimized characteristics on the basis of dielectric and microstrip structure was proposed. We reckon that the result of this research will apply with effect to transition design in microwave packaging development.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.6
• /
• pp.145-155
• /
• 2023

A radial combiner with high efficiency characteristics in the X-band was designed and manufactured using a waveguide and matching structure. In particular, in order to manufacture it in a small size, a dual waveguide to coaxial transition structure was applied that allows two ports to be matched to one waveguide. Applying this structure makes it possible to manufacture smaller than typical coaxial to waveguide radial combiner. As a result of measurement in the X-band band of 9.2~10GHz, the return loss was less than -18.408dB and the output insertion loss was less than 0.206dB, and the output combining efficiency was obtained as high as 95.37% or more. It is expected that it can be used in the combining part for high output transmitters in the millimeter wave band in the future. In particular, the range of use is expected to increase by reducing the size and weight.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.1649-1654
• /
• 2004

The near field structures of an under-expanded, dual, coaxial, jets issuing from the coaxial nozzles with four different geometries are visualized by using a shadowgraph optical method. Experiments are conducted to investigate the effects of the nozzle-lip thickness, secondary stream thickness, the nozzle pressure ratio and the secondary swirl stream on the characteristics of under-expanded jets. The results show that the presence of secondary annular swirling stream causes the Mach disk to move further downstream and increases its diameter, which decreases with a decrease in the nozzle-lip thickness. The secondary stream thickness has an influence on the location of an annular shock wave.

• The Journal of the Korea Contents Association
• /
• v.7 no.1
• /
• pp.124-130
• /
• 2007

A rectangular coaxial line is mainly utilized as a transition structure from a coaxial line to a rectangular waveguide. A TEM cell is also widely used to measure the EMC characteristics of a DUT. In order to understand the operations of a rectangular coaxial line and a TEM cell, it is essential to analyze the dispersion relations of a rectangular coaxial line and a TEM cell. In this paper, we present simple yet accurate dispersion relations of the TE and TM higher modes based on the TEM mode. Manipulating a mode-matching technique and a Green's function approach allows us to obtain the analytic dispersion equations of a rectangular coaxial line and a TEM cell. In our approach, a rectangular coaxial line is divided into four L-blocks and its electromagnetic fields representations are easily obtained with a superposition. To verify the convergence of our dispersion relations, we perform numerical computations and compare our results with those of FDTD.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.2
• /
• pp.93-99
• /
• 2016

In this paper, higher order coupler using small size waveguide which applicable for mobile Ku-band multimode monopulse satellite tracking antenna system, has been designed, implemented and tested. Proposed higher order mode coupler adopts a coaxial structure for low profile characteristic considering installation property to mobile satellite terminal system. In addition, by using proposed coupler, extracted tracking error signal pattern has measured and confirmed that required tracking accuracy is satisfied in desired frequency band. In the future, proposed coupler could utilize for multimode monopulse satellite tracking system for high tracking accuracy.

• ETRI Journal
• /
• v.21 no.2
• /
• pp.1-8
• /
• 1999

We analyze the characteristics of a coaxial-to-waveguide transition based on the finite difference time domain (FDTD) method with the cylindrical to rectangular cell interpolation scheme. The scheme presented in this paper is well suited for the analysis of a microwave device with a probe near waveguide discontinuity because perfect TEM mode can be generated inside the coaxial cable by using the cylindrical cell. The scattering parameters of a designed Ka-band transition are evaluated and compared with those of commercially available software, High Frequency Structure analysis Simulator (HFSS) and measured data. There exists good agreement between the measured and calculated data. In order to prove an accuracy of the interpolation scheme, a coaxial to waveguide transition with a disk-loaded probe is analyzed by the present approach and the results of this analysis are compared with measured data. Comparison shows that our results match very closely to those of measurement and other approaches. The method presented in this paper can be applied to analyze the characteristics of a probe excited cavity, coaxial waveguide T-Junctions, and so on.

• Nuclear Engineering and Technology
• /
• v.41 no.10
• /
• pp.1323-1332
• /
• 2009

The IHX (Intermediate Heat eXchanger) for a pool-type SFR (Sodium-cooled Fast Reactor) system transfers heat from the primary high temperature sodium to the intermediate cold temperature sodium. The upper structure of the IHX is a coaxial structure designed to form a flow path for both the secondary high temperature and low temperature sodium. The coaxial structure of the IHX consists of a central downcomer and riser for the incoming and outgoing intermediate sodium, respectively. The IHX of a pool-type SFR is supported at the upper surface of the reactor head with an IHX support structure that connects the IHX riser cylinder to the reactor head. The reactor head is generally maintained at the low temperature regime, but the riser cylinder is exposed in the elevated temperature region. The resultant complicated temperature distribution of the co-axial structure including the IHX support structure may induce a severe thermal stress distribution. In this study, the structural feasibility of the current upper support structure concept is investigated through a preliminary stress analysis and an alternative design concept to accommodate the IHTS (Intermediate Heat Transport System) piping expansion loads and severe thermal stress is proposed. Through the structural analysis it is found that the alternative design concept is effective in reducing the thermal stress and acquiring structural integrity.

• Journal of Power System Engineering
• /
• v.4 no.1
• /
• pp.39-44
• /
• 2000

The purpose of this study is to investigate the flame structure and combustion characteristics in the model gas turbine combustor changing equivalence ratio. For this purpose, temperature and ion current were measured and these data were analyzed by the PDF and power spectra technique. We found that the flame length is longer while increasing the equivalence ratio in experimental condition, and especially ${\psi}=0.19$, combustion reaction was active by the stable swirl flow. and these flames were governed by the random three dimensional eddy.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2004.03a
• /
• pp.784-788
• /
• 2004

A visualization study of shock formation of the supersonic jet nozzle using a Shadowgraph Method (SM) was carried out to investigate the effect of the longitudinal variation of coaxial pipe end tip position inside the supersonic nozzle. The experiment was performed for the Mach number range from 1.1 to 1.2 at nozzle exit. The well known shock cell structure was shown with the pipe end located deep inside the nozzle for the studied Mach number. With the pipe end approaches nozzle exit, it was found that the shock cell structure disappeared and turned into complex formation. In order to understand the mechanism of the shock structural change, computational simulation was carried out using the Navier-Stokes solver, FLUENT. Topological sketch was added with an aid of the visualization and the numerical simulation.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2000.11a
• /
• pp.399-403
• /
• 2000

A new type of collinear antenna called short-ended coaxial slot-coupled strip array antenna is investigated theoretically. The antenna has an advantage of structural simplicity. The integral equations are derived for the proposed structure by use of the Fourier transform and mode expansion, and the simultaneous linear equations are obtained. The slot electric field and strip current are then obtained by solving the simultaneous linear equation. The effects of slot and strip number on the radiation efficienty, beamwidth and directivity gain are also presented.