• 한국표면공학회지
• /
• 제54권2호
• /
• pp.90-95
• /
• 2021

Surface modification technique enabling the control of condensation provides various benefit in various engineering systems, such as heat transfer, desalination, power plants, and so on. In this study, lubricant oil-impregnation into Teflon-coated nanoporous anodic oxide layer of aluminum to enhance a de-wetting and mobility of water droplet on surface. Due to the surface treatment improving water-repellency, the condensation mode is changed to dropwise, thus the frequency of sliding condensed water droplet on surface is increased. For these reasons, the surface of oil-impregnated Teflon-coated nanoporous anodic aluminum oxide shows significantly enhanced condensation heat transfer compared to bare aluminum surface. In addition, the porosity of anodic aluminum oxide affected the mobility of water droplet even with oil-impregnation and Teflon-coating, indicating that the optimization of porous structure of anodic oxide is required for maximizing the condensation heat transfer.

• 한국자원식물학회지
• /
• 제27권4호
• /
• pp.380-391
• /
• 2014

작물을 비롯한 식물체들은 작물 생산량 감소에 중요한 요인인 고온 건조풍에 의해 영향을 받는다. 이러한 영향으로부터 식물체들을 보호할 수단으로 코팅재를 고려할 수 있다. 이 연구에서 다양한 요인들에 의해 일어나는 급격한 증산작용으로부터 작물을 보호할 코팅소재를 탐색하기 위한 실내 선발법들을 확립했다. 강낭콩 유묘 포트의 무게 변화를 6일 동안 측정한 시험에서 아비온 처리구는 무처리구에 비해 유의하게 무게 감소를 억제하였다(P = 0.05). 하지만 이 방법은 장시간이 소요되는 단점이 있어 보다 단순한 방법으로 염화코발트지가 수분 접촉 시 푸른색에서 붉은색으로 변화는 색 변화법을 이용하였다. 밀납, 구아검, 유동파라핀, 콩오일 및 PE-635가 처리 30분 및 1시간 후 각각 37%와 43%의 방수력을 나타냈다. 하지만 이들 소재들도 2시간 후에는 유의할만한 방수효과를 보이지 않았다. 비록 이들 방법들이 코팅 소재를 탐색하는데 적절하다 할지라도, 보다 과학적이고 객관적인 자료들을 도출해 낼 선발법이 필요하다. 그래서 고안한 방법이 광합성측정기를 이용하여 증산율을 측정하는 방법이었다. 야외에서 재배한 보리 잎을 이용한 시험에서 2% 콩오일과 아비온 10배 희석액 처리가 증산율 억제효과를 나타냈다. 또한 옥수수 유묘 및 살구나무 신초를 이용한 시험에서 2% 유동파라핀액과 살구씨오일, 아마씨오일, 올리브오일 및 콩오일과 같은 식물체 정유들이 유의할만한 증산율 억제효과를 나타냈다(P = 0.05). 특히, 유동파라핀 및 콩오일 2%를 출수 후 2주 이상된 벼에 처리하였을 때 비슷한 증산율 억제력을 보였다. 또한 2% 콩오일과 전착제 혼합물을 옥수수 유묘에 처리 시 전착제 단독으로 처리한 것에 비해 증산율 억제효과가 증가했다. 이는 전착제가 식물체 잎 표면에서 이들 소수성 소재들이 보다 더 균일하게 확산하는데 도움을 주기 때문으로 보인다. 이 소수성 소재가 잎 표면의 기공들을 효과적으로 잘 도포하고 있음도 전자현미경으로 확인하였다. 이상의 결과는 이들 소수성 소재들이 식물체 코팅재로서 활용될 수 있음을 시사한다.

• 접착 및 계면
• /
• 제21권2호
• /
• pp.58-64
• /
• 2020

본 연구에서는 UV 경화형 폴리우레탄 아크릴레이트와 실리카 나노입자를 용매에 분산하여 간편한 스프레이 코팅을 통해 초발수 및 초발유 표면을 제작하였다. 용매의 종류, 고분자의 농도, 분사량 조절에 따른 코팅 표면 구조의 변화를 확인하였으며, 물과 오일의 접촉각 측정을 통해 초발수 및 초발유 특성을 정량화 하였다. 스프레이 코팅 표면의 re-entrant 구조를 분석하여 초발수 및 초발유 특성이 극대화된 스프레이 코팅의 메커니즘을 제시하였다. 최적화된 스프레이 코팅 조건을 적용하여 제조된 표면의 물과 오일의 접촉각 hysteresis는 각각 2°, 30° 이하이며 오일 방울이 표면에서 튈 정도로 우수한 초발수 및 초발유 특성을 보였다.

• 펄프종이기술
• /
• 제36권4호
• /
• pp.49-59
• /
• 2004

This study was carried out to obtain the basic data for producing higher functional coating agents for pulp mold by evaluating various kinds of starch derivatives. At that time, four kinds of starch derivatives were manufactured for making coating agents respectively. Physical properties of coated paperboards were tested. Conclusions obtained from this results were as follows. The water and oil resistance of hydroxypropylated, cyanoethylated and carboxymethy­lated starch were high when degree of molar substitution(DS) of propylene oxide, acrylonitrile and sodium monochloroacetate were 0.18, 0.07 and 0.009, respectively. Also, the those of crosslinked starch were high when degree of crosslinking of epichlorohydrin was 0.02. Consequently, $8\%$ solution of carboxymethylated starch made with DS 0.009 of monochloroacetate was the best among coating agents from starch derivatives men­tioned above.

• Journal of Microbiology and Biotechnology
• /
• 제20권9호
• /
• pp.1348-1350
• /
• 2010

Conidia of Beauveria bassiana ARSEF-7060, produced in millet amended with plant oils such as sunflower, corn, or cotton seed oil, were exposed to $45^{\circ}C$ of wet heat for 90 min. Conidia from millet+corn oil medium had the highest thermotolerance [$LT_{50}$ (median survival time): 45.7 min]. The mycotized millet grains were coated with each of the same plant oils as a granular formulation and subjected to $50^{\circ}C$ of dry heat for 8 h. Corn oil coating ($LT_{50}$: 8.68 h) was superior to sunflower and cotton seed oil coatings, suggesting the feasibility of using corn oil to increase conidial thermotolerance.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
• /
• pp.51-52
• /
• 2002

We report results on microtribological studies of chemically grafted nanoscale polymer layers of different architecture with thickness below 30 nm. We have fabricated the molecular lubrication coatings from elastomeric tri-block copolymers and tested two different designs of corresponding nanocomposite coatings. We observed a significant reduction of friction forces and an increase of the wear stability when a minute amount of oil was trapped within the grafted polymer layer. These polymer gel layers exhibited a very steady friction response and a small value of the coefficient of friction as compared to the initial polymer coating. A polymer 'triplex' coating has been formed by a multiple grafting technique. The unique design of this layer Includes a hard-soft-hard architecture with a compliant rubber interlayer mediating localized stresses transferred through the topmost hard layer. This architecture provides a non-linear mechanical response under a normal compression stress and allows additional dissipation of mechanical energy via the elastic rubber interlayer.

• Journal of Mechanical Science and Technology
• /
• 제20권3호
• /
• pp.358-365
• /
• 2006

The hydraulic pump of an Electro-hydrostatic Actuator should be able to quickly feed large volume of oil into hydraulic cylinder in order to reduce the response time. On the other hand, it should be also able to precisely dispense small amount of oil through low-speed operation so that the steady state position control error of the actuator can be accurately compensated. Within the scope of axial piston type hydraulic pumps, this paper is focused on the investigation how the surface treatment of their cylinder barrel with TiN plasma coating can contribute to the reduction of the friction and wear rate of valve plate in the low-speed range with mixed lubrication. The results showed that the friction torque of the valve plate mated with a TiN coated cylinder barrel could be reduced to 22% of that with an uncoated original one when load pressure was 300 bar and rotational speed 100 rpm. It means that the torque efficiency of the test pump was expected to increase more than 1.3% under the same working condition. At the same time, the wear rate of the valve plate could be reduced to $40\sim50%$.

• Journal of the Korean Wood Science and Technology
• /
• 제34권3호
• /
• pp.30-37
• /
• 2006

본 연구는 각종 실내디자인에 이용되는 목질보드의 포름알데히드(HCOH) 방산 특성과 몇 가지 VOC 저감 방법에 대한 포름알데히드의 방산량 변화를 측정하였다. 포름알데히드 방산량은 온도가 증가함에 따라 뚜렷이 증가하는 경향을 보였고, 측정 전 처리조건에 따라 포름알데히드 방산량의 현저한 변화가 나타났다. bake-out 처리후의 목질보드의 포름알데히드 방산량은 대조구와 비교하여 감소함을 나타냈다. 시편에 urethane, cashew, water stain, oil stain coating을 했을 때 각 마감재료에 따라 포름알데히드 방산량의 차이가 확인되었으며, edge sealing 처리 후 두드러진 감소경향이 나타났다. $TiO_2$ coating은 일반광보다는 자외선 램프의 포름알데히드 저감효율이 좋았고, 자외선 램프의 조사시간이 길어지면 포름알데히드의 감소량도 증가하였다.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.354-354
• /
• 2006

Alginic acid-silica hydrogel films was prepared for testing as protective coating materials for PTFE OD membranes. Unprotected hydrophobic membranes are subject to wet-out when contacted by surface-active agents. Films were characterised using SEM, XRD, DSC, mechanical strength measurements, and water-swelling measurements. In OD trials using coated membranes, no wet-out occurred over the 15 h duration of three consecutive 5 h OD trials using orange oil-water mixtures. In the case of detergent solutions, the coating afforded protection to the membrane for 4-5 h. In a separate trial, no wet-out occurred when the coated side of the membrane was placed in contact with 1.2 wt % orange oil for 72 hours.

• 한국농공학회지
• /
• 제21권1호
• /
• pp.78-85
• /
• 1979

In order to obtain the basic data for designing optimum flat plate solar air heaters, which can be operated with relatively low temperature for drying farm products, 8 different treatment of solar air heaters were devised and tested for their heating performances and efficiencies. The results were analised and summarized as follows. 1. The primary factors, structure of air path (C), black coating materials (A) and bottom coating methods (B) showed very high significant effect of far above 1% level. With respect to the mutual multiplying effect of secondary factors, 1% level of significance was found with coating materials and methods (AB), and 5% level of significance was found with coating materials and air path structure (AC). 2. The heating performance of the air heaters with winding air path showed about twice those with straight air path. 3. The Korean black ink which is less expensive than dim oil paint showed 3-4% better heating efficiencies as the black coating material of flat plate solar air heaters. 4. The heating efficiencies of the solar air heaters whose bottoms were not black coated were 2-3% higher than those with black coated bottoms. 5. The highest heating efficiency of solar air heater among 8 different treatment was found in the plot of Korean black ink-bottom not coated-winding air path showing 29.0-34.5%